Podpěra pro stožár z uhlíkových vláken (3 jednotky)

This mount is designed for optimal integration on performance sailboat masts. It allows mounting three Garmin GNX™ 120 instrument displays, consolidating essential navigation data (wind, depth, speed) for improved visibility from the cockpit or deck.

The mount consists of a front panel in anodized aluminum and side panels in carbon fiber. A protective cover is also included, made of neoprene.

The three-device mount weighs 1.95 kg (4.3 lbs). This weight does not include the devices or cables.

Yes, a neoprene protective cover is provided with the mount to protect the instruments from the elements.

This mount is specifically sized for Garmin GNX™ 120 displays, ensuring a precise fit and a homogeneous aesthetic, often referred to as a "glass mast".

The mount is designed for optimal integration on performance sailboat masts.

This mount is specifically designed to accommodate three Garmin GNX™ 120 instrument displays.

The mount is compatible with masts with diameters between 115 and 200 mm (4 to 8 inches).

The hardware required to connect your marine instruments to the mounting bracket is included with the marine instruments themselves, not with the mast mount.

T-connectors for NMEA 2000 and right-angle drop cables required to connect marine instruments to your NMEA 2000 network are included with the marine instruments. A main NMEA 2000 cable is included with the bracket to extend the network to instruments mounted in the bracket.

For installation, you will need a Phillips screwdriver (size #2), as well as a drill and drill bits if you need to mount the bracket to the mast. Mast-specific mounting hardware is not included.

No, the hardware required to mount the bracket to the mast is not included. This hardware may vary depending on your specific installation needs and must be purchased separately.

No, the mounting arms of the bracket do not have pre-drilled holes. You will need to drill the holes or prepare the mounting arms according to your specific mast mounting requirements.

The gaskets, supplied with the devices (GNX 120 displays), must be attached to the rear of each device. The gasket has an adhesive side and must adhere to the back of the device, not to the mast support.

Yes, it is important to always wear safety glasses, hearing protection, and a dust mask when drilling, cutting, or sanding. Additionally, always check what is on the other side of the surface before drilling or cutting.

You must assemble the NMEA 2000 T-connectors, then secure them to the provided mounting plate using the included screws and nuts. Next, connect the drop cables at a right angle above the T-connectors and to the devices.

The sun protection cover is attached to the mast mount using snap buttons located at the top and bottom of the mount. It is important to choose a mounting location where both the upper and lower parts of the mount are accessible if you plan to use the cover.

The devices are first secured to the device straps using the threaded rods and clamping screws provided with the devices. Then, the devices are placed in the front panel of the mast bracket, and the device straps are fastened to the front panel of the bracket using the included screws.

Yes, a main NMEA 2000 cable is included with the bracket to extend your NMEA 2000 network to the instruments mounted in the bracket. If this cable is not long enough, you will need to purchase a longer one.

This version is designed for three Garmin GNX 120 displays. It is suitable for sailboat installations where data must remain readable from the cockpit and deck.