Y-kabel pro 12pin sondu

The Y-cable for Garmin 12-pin transducer (reference 010-12225-00) is designed to connect two transducers to a single sonar unit. Its primary purpose is to optimize SideVü imaging by eliminating shadow zones created by the keel, hull, or engine leg, thereby providing complete and detailed SideVü coverage.

By allowing the connection of two transducers, the Y-cable eliminates shadow zones that can be caused by physical obstacles under the boat, such as the keel or the engine. This ensures uninterrupted and more detailed SideVü coverage, improving underwater detection on the sides of your vessel.

When the Y-cable is used, the transducer connected to the port side port is dedicated to producing the left SideVü images. This allows specific and optimized data capture on the port side of your boat.

The transducer connected to the starboard port of the Y-cable provides a wider range of data. It handles traditional images, ClearVü, right SideVü, as well as water temperature and the transducer ID. This setup ensures comprehensive collection of essential information.

No, the Y-cable for Garmin 12-pin transducer is specifically designed to integrate with Garmin sonar systems. It is compatible only with Garmin GT 12-pin transducers.

No, this cable is not compatible with the GT2x transducer series. It is specifically designed to work with the 12-pin GT transducers in the GT3x, GT4x, and GT5x series, including models GT30, GT34, GT36, GT40, GT41, GT50, GT51, GT52, GT54, GT56.

This Y-cable is compatible with Garmin GPSMAP sonar units from the 7400xsv, 7600xsv, 8400xsv, 8600xsv, and 9000xsv series. It integrates seamlessly with these models for optimal performance.

Yes, the Y cable for Garmin 12-pin transducer is fully compatible with the GSD 25 premium sonar module. It allows efficient connection of two transducers to this module for advanced imaging.

No, the Garmin Y-cable installation is plug-and-play. It requires no specialized tools or complex software configuration. Connections are straightforward and direct.

No, no complex software configuration is required after installing cable Y. It works immediately thanks to its "plug & play" design.

Yes, the ends of cable Y are clearly marked. This greatly simplifies the wiring process and ensures each transducer is connected to the correct port (port or starboard) on the sonar unit.

The product reference (SKU) for this Y-cable for Garmin 12-pin transducer is 010-12225-00.

This cable is compatible with all GT 12-pin transducers in the GT3x, GT4x, and GT5x series. This specifically includes models GT30, GT34, GT36, GT40, GT41, GT50, GT51, GT52, GT54, and GT56.

Yes, as long as both transducers are compatible 12-pin GT models (GT3x, GT4x, GT5x series), you can connect them via the Y-cable. The cable is designed to handle data from two transducers simultaneously, regardless of their specific models within the compatible series.

The Y cable is designed to optimize SideVü imaging but also supports data for traditional and ClearVü imaging via the starboard transducer. The port transducer is specifically dedicated to left SideVü.

Using two transducers with this cable eliminates shadow zones under the boat, such as those created by the keel or the engine, which can obscure SideVü imaging. This ensures complete and uninterrupted SideVü coverage, providing a clearer and more detailed underwater view.

This Y-cable is an official Garmin accessory, designed to integrate seamlessly with their fishfinder systems.

Yes, as a Garmin marine accessory, this cable is designed to withstand marine environments and can be used in both fresh and salt water, provided the connected transducers and sonar units are also suitable for these environments.

Garmin accessories, including this Y cable, are generally covered by a limited one-year warranty from the date of purchase. It is recommended to keep your proof of purchase for any warranty claim.

The "12-pin" specification refers to the type of connector used by the Y-cable. This indicates it is designed to plug into Garmin transducers and sonar units equipped with 12-pin connection ports, ensuring correct electrical and data compatibility.