VHF námořní pevná verze EVO

Yes, the VHF IC-M510E EVO has an IP68 waterproof rating, meaning it is protected against prolonged immersion in water according to the defined standards.

Yes, this device has its own built-in GPS receiver. It is SBAS-compatible and receives on the 1575.42 MHz frequency for accurate positioning.

No, the standard IC-M510E EVO VHF is not equipped with an integrated AIS receiver. This feature is exclusive to the IC-M510EAIS EVO version. It allows you to display nearby AIS targets directly on the VHF screen or transmit them to a compatible multifunction display.

You can integrate the IC-M510E EVO VHF into your navigation system in several ways:

NMEA 2000: For a modern and simple connection with other compatible devices.NMEA 0183: For compatibility with older equipment (version 2.0 or higher required).Wi-Fi: For wireless connection to devices such as smartphones or tablets.

The IC-M510E EVO VHF offers two selectable transmit power levels:

High power: 25 WattsLow power: 1 Watt

Yes, thanks to its integrated Wi-Fi connectivity (IEEE802.11 b/g/n), you can remotely control the VHF using the RS-M500 software application on your compatible mobile device.

The IC-M510E EVO VHF must be powered by a 12 V DC source with a negative ground. The accepted operating voltage range is 10.8 V to 15.6 V DC.

The main VHF unit dimensions, excluding protrusions, are 175 mm (width) x 110 mm (height) x 53 mm (depth).

The approximate weight of the main unit, without the microphone, is 750 grams.

This device is designed to operate within a wide temperature range, from -20 °C to +60 °C, making it suitable for most marine environments.

Yes, it is entirely possible to connect an external speaker. The VHF has a typical 15-watt audio output at 4 Ω, ensuring excellent sound clarity even in noisy environments.

When the VHF transmits at its maximum power of 25 Watts, the current consumption is a maximum of 5.0 Amps (at a voltage of 13.8 V DC).

The IC-M510E EVO VHF is an ASN Class D radio, compliant with recreational boating regulations.

You must use a standard marine VHF antenna with a nominal impedance of 50 Ω (Ohms).

Yes, flush-mounting is possible. You will need an optional mounting kit for this purpose, such as part numbers MBF-7 or MBF-9.

To secure the wireless connection, the VHF supports several encryption protocols:

WEP (64/128 bits)WPA-PSK (TKIP)WPA2-PSK (AES)

The EVO version of the IC-M510E is a high-end model distinguished by native integration of several advanced features:

AIS receiver: For maritime traffic monitoring.GPS/SBAS receiver: For autonomous positioning.Wi-Fi connectivity: Enables remote control via an application.NMEA 2000 interface: For easy integration into modern onboard networks.

Thanks to its NMEA 2000 and NMEA 0183 interfaces, the IC-M510E EVO VHF can transmit AIS data to a compatible multifunction display or chartplotter, provided it is connected to an external AIS receiver (the built-in AIS receiver being exclusive to the IC-M510EAIS EVO version).

The transmit frequency range (TX) of this device spans from 156.025 MHz to 161.425 MHz, covering all international marine channels.

Yes, it is possible to extend the microphone range. Optional extension cables, such as models OPC-1541 or OPC-1000, are available for this purpose.