Sondy Lowrance EAGLE 7" 50/200 HDI

The Lowrance EAGLE 7 fishfinder screen has a 7-inch diagonal display. It offers a resolution of 800 x 480 pixels, ensuring clear reading of depth sounder and navigation data.

No, the Lowrance EAGLE 7's screen is not touch-sensitive. The interface is fully controlled via a keypad with buttons, ensuring reliable operation even with wet hands or in harsh conditions.

The 50/200 HDI (Hybrid Dual Imaging) transducer combines two advanced technologies:

Traditional CHIRP sonar: Uses 50/200 kHz frequencies for excellent fish detection and seabed tracking at various depths. DownScan Imaging™: Uses 455/800 kHz frequencies to deliver high-resolution, near-photographic images of structures and seabeds directly beneath the boat.

Yes, the EAGLE 7 fishfinder has an IPX7 waterproof rating. This means it is protected against temporary immersion in water (up to 1 meter for 30 minutes).

For installation of the EAGLE 7 fishfinder, it is recommended to use a 3 A fuse on the power circuit to protect the unit.

The Lowrance EAGLE 7’s single fishfinder port is compatible with the included 50/200 kHz HDI transducer, as well as with Lowrance SplitShot™ and TripleShot™ transducers, allowing lateral scanning (SideScan) options if you upgrade your transducer.

The device has a single memory card reader. It is compatible with microSD cards with a maximum capacity of 32 GB.

Yes, the Lowrance EAGLE 7 is a chartplotter compatible with detailed marine charts. You can use C-MAP DISCOVER™ and Navionics® charts to enhance your navigation and fishing experience.

The maximum power consumption of the EAGLE 7 fishfinder is 6.6 Watts, which corresponds to a current of 550 mA at a voltage of 12 V DC.

To take a screenshot, simply press the Pages key and the Power button simultaneously.

Yes, to instantly create a MOB (Man Overboard) waypoint at your current GPS position, simultaneously press the Zoom In (+) and Zoom Out (-) buttons.

The Lowrance EAGLE 7 is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F).

To clean the device, use a soft cloth with warm water and a small amount of dish soap or mild detergent. Never use a high-pressure water jet for cleaning.

The weight of the EAGLE 7 fishfinder screen, without its bracket or cables, is 0.67 kg (1.48 lb).

No, the Lowrance EAGLE series of fishfinders, including the 7-inch model, does not have NMEA 2000 connectivity. It cannot share data with other instruments via this network.

Yes, the EAGLE 7 display offers very wide viewing angles. They are 85 degrees in all directions (up, down, left, and right), ensuring excellent visibility from any position on the boat.

The 50/200 HDI transducer uses multiple frequencies for its different technologies:

Traditional CHIRP: 50 kHz (low frequency) and 200 kHz (high frequency). DownScan Imaging™: 455 kHz and 800 kHz for very high-resolution images.

Yes, you can record the depth sounder data (logs) on a microSD card inserted in the device. The files are saved in .sl2 format. You can also export your waypoints and routes in "User Data File" format.

For a flush-mounted installation in the dashboard, a dashboard gasket kit (sold separately, part number 000-16254-001) is required to ensure a perfect finish and watertight seal. The unit is supplied with a bracket for surface mounting as standard.