Sondy Lowrance Eagle 9 bez sondy

The Lowrance Eagle 9 is equipped with a single sonar port compatible with the following Lowrance transducers (sold separately):

Using one of these transducers enables the depth sounder functions of the unit.

The Lowrance Eagle 9 screen measures 9 inches diagonally. It offers a resolution of 1024 x 600 pixels, ensuring a sharp and detailed image.

No, this version of the Lowrance Eagle 9 (reference 000-16231-001) is specifically sold without a transducer. This is an ideal solution if you already own a compatible transducer or want to select one suited to your fishing style.

The Lowrance Eagle 9 has a card reader compatible with microSD-type cards. The maximum supported capacity for the card is 32 GB.

Yes, the Eagle 9 display is designed for excellent readability even in full sunlight. It features wide viewing angles of 85 degrees (up, down, left, and right), allowing you to clearly see the screen from different positions.

It is recommended to install a 3 Amp fuse on the power line of your Lowrance Eagle 9 to protect it against power surges.

Yes, this device is waterproof and has an IPX7 protection rating. This means it is protected against accidental immersion in water up to 1 meter deep for 30 minutes.

By connecting a compatible transducer (sold separately), the Lowrance Eagle 9 can display multiple views:

CHIRP Sonar: For clear fish detection displayed as arcs. DownScan Imaging™: For a detailed, near-photographic view of structures and the seabed directly beneath your boat. SideScan Imaging™: To scan wide areas on both sides of your boat and spot structures (requires a TripleShot™ transducer).

Yes, the Lowrance Eagle 9 includes an accurate GPS receiver. It allows you to navigate, mark waypoints, create routes, and record your tracks without requiring an external antenna.

To instantly create an emergency waypoint 'Man Overboard' (MOB), simply press the Zoom In (+) and Zoom Out (-) buttons simultaneously on the device.

The maximum power consumption of the Lowrance Eagle 9 is 7.68 W, which equates to a current of 640 mA at 12 V DC.

The Lowrance Eagle 9 comes with a mounting bracket and knobs, allowing you to install it easily on a flat surface of your console. A flush-mount installation in the dashboard is also possible with a specific mounting kit (sold separately).

The weight of the Lowrance Eagle 9 screen, without its bracket or cables, is 0.9 kg (1.98 lb).

Yes, the Eagle 9 is a full-featured chartplotter. With its microSD card reader, you can use detailed marine charts (sold separately) to improve navigation accuracy.

The Lowrance Eagle 9 is designed to operate in temperature conditions ranging from -15°C to +55°C (5°F to 131°F).

For cleaning, use a soft cloth dampened with warm water and a drop of dish soap. Gently wipe the screen and housing. Important: Never use a pressure washer, chemical solvents, or abrasive products.

This version is ideal if you want to replace an old Lowrance display while keeping your existing SplitShot™ or TripleShot™ transducer. It is also a good choice for anglers who prefer to select a specific transducer perfectly suited to their needs rather than one included in a standard bundle.

The Lowrance Eagle 9 display unit without transducer (000-16231-001) includes the following:

The Eagle 9 combined display\nThe mounting bracket with its clamping knobs\nThe power cable\nNote: The transducer is not included and must be purchased separately.

Although this model is supplied without a transducer, it is fully compatible with Lowrance SplitShot™ and TripleShot™ transducers thanks to its single connection port. Adding a TripleShot™ transducer, for example, will allow you to use traditional CHIRP views as well as high-resolution DownScan Imaging™ and SideScan Imaging™.

Yes, the Lowrance Eagle 9 integrates a precise GPS receiver to facilitate your navigation. It also features a microSD card reader (supporting a maximum capacity of 32 GB), allowing you to insert and use a wide range of detailed marine charts to log your waypoints, routes, and tracks.

The Lowrance Eagle 9 display operates on a standard 12 V DC power supply (accepted range: 10.8 to 18 V DC). Its maximum power consumption is 7.68 W (640 mA at 12 V DC). To ensure a safe electrical installation of your device, it is recommended to use a 3 A fuse.