Boční světlo 1MN - loď <12 m - levobok (červená 112,5°)

This is a side navigation light specifically designed for the port (left) side of the boat. It emits a red light over a 112.5° arc and is part of the Mantagua Tiny range, known for its light weight and compact size.

This Mantagua Tiny lateral light has a luminous range exceeding 1 nautical mile (NM), making it compliant with safety requirements for coastal and inland navigation.

This navigation light is suitable for vessels under 12 metres (39 feet).

The Mantagua Tiny side light port requires a regulated 12V DC power supply.

The beacon dimensions are: total height of 72 mm (30 mm for the beacon body and 42 mm for the base) and a diameter of 40 mm.

Yes, it is fully epoxy-resin encapsulated, providing IP67 waterproofing and increased resistance to vibrations, ensuring reliable operation in the most demanding marine environments.

The operating temperature range of this light is between -20°C and 50°C.

This port-side lateral light emits a red light, in accordance with maritime signaling standards.

The light is diffused over an arc of 112.5°, which meets the required signalling for a port-side light.

The light intensity of this beacon is greater than 1.1 candela, ensuring visibility at 1 nautical mile.

For installation, you must use cable ties (for the TINY BALCON version). The cable must be routed through the mast foot, then the foot is secured to the lantern using the 2 screws provided. Finally, the lantern is attached to the mast with 4 mm stainless steel screws, also provided.

Stainless steel screws of ø 4 mm are provided for mounting the light on the mast, ensuring resistance to the marine environment.

You must orient the boat symbol at the top of the light toward the bow of the boat to ensure correct and compliant signaling according to navigation rules.

A minimum cable cross-section of 0.5 mm² is recommended for power wire connections to ensure a reliable electrical connection.

For the connection, the blue wire must be connected to the negative terminal (-) and the white wire to the positive terminal (+12V DC).

No, the light must be assembled on its mount manually; it is not necessary to use an electric drill for this step.

No, this specific model (ref. 00133) is a port-side (red 112.5°) navigation light and is designed solely for this position. For other positions such as starboard (green) or stern (white), other models from the Mantagua Tiny range are available.