Alternátor Alpha 12/130 III s regulátorem Alpha Pro III

The Alpha 12/130 III alternator is supplied with its Alpha Pro III smart charge regulator and a standard double V-belt pulley.

This alternator delivers a total charging current of 130 A at a voltage of 12 VDC. Its design allows it to provide full charging power even at low engine speeds (idle).

Yes, thanks to the included Alpha Pro III regulator, this system is fully compatible with lead-acid and lithium-ion (Li-ion) battery banks.

The Alpha 12/130 III alternator is fitted with a bidirectional fan. It can therefore rotate either clockwise or counterclockwise without affecting its cooling.

Yes, unlike some compact models, the Alpha 12/130 III alternator features an insulated design. The negative output is not connected to the metal housing, which helps protect sensitive electronics on some marine engines.

Yes. By adding a split-charge relay (such as a Battery Mate model), you can use this alternator to safely recharge two or three battery banks simultaneously (for example, a starter bank and a service bank).

It is supplied as standard with a double V-belt pulley (2xA section) with a nominal diameter of 89 mm.

Yes, although it comes with a double V-belt pulley, this model can be fitted with a multi-groove pulley (PK profile) to match your specific drive belt.

Absolutely. Its bidirectional fan provides forced cooling, allowing it to maintain high performance even in engine rooms where ambient temperature exceeds 40 °C.

It features a "six-hour" mounting type. It fits many engine mounts, but installation may require a custom bracket depending on your engine's make and model.

Standard alternators require high engine RPM to deliver full output. The Mastervolt Alpha alternator is specifically optimized to provide maximum charging current even at low RPM, reducing the engine runtime needed for recharging.

Yes, this is one of its main applications. It is very often installed as a secondary alternator dedicated exclusively to the service battery bank, while the original alternator manages the starter battery.

The Alpha Pro III regulator uses a 3-stage smart charging process with precise voltages: 14.25 V in Absorption phase and 13.25 V in Float phase (maintenance).

This marine alternator weighs 10.1 kg.

Yes, Mastervolt does not supply mounting brackets. You must use the alternator bracket specified by your engine manufacturer (PTO option) or have a robust custom bracket fabricated by a professional to withstand vibrations.

Yes, the conversion of mechanical energy into electrical energy has an efficiency of about 50%. It is important to verify that your engine has sufficient power reserve to drive this 130 A alternator at full load.

The regulator intelligently controls the alternator's output voltage and current. It ensures fast and safe charging while preventing overcharging, significantly extending the lifespan of your batteries.

No, this specific model (reference 48612130) is designed for 12 VDC systems only. If you have a 24 V battery bank, you will need to choose from the Alpha 24/75, 24/110 or 24/150 models.

Yes, for safety reasons, it is imperative to install protective fuses on the wiring connecting the alternator output and the regulator to the batteries.

Yes. When combined with a high-capacity battery bank, this high-performance alternator provides a quiet and efficient alternative to installing a generator, by massively recharging the batteries while the main engine is running.