Ovládací panel ICC pro měnič-nabíječ

The Remote ICC (Inverter Charger Control) control panel from Mastervolt is designed for the operation and remote control of Mass Combi systems. It enables precise and real-time monitoring of the inverter/charger's status.

This panel provides a dedicated user interface for managing onboard power. It displays essential information via its indicators, showing the charger and inverter status, currents, voltages, and charge cycle statuses. It also includes an on/off switch.

In "Charge" mode, the display shows the DC charge current as a percentage of the maximum and the charge cycle status (bulk, absorption, float), crucial details for battery health.

If the red "Failure" LED lights up, it indicates a system fault has been detected. Specific fault causes are explained in the Mass Combi manual.

The AC input LED lights up green if AC power is available and meets specifications. It flashes rapidly in case of insufficient incoming AC quality, which is critical to prevent damage to sensitive equipment.

The charger's LED (Charger) lights up green when the Mass Combi is operating in charger mode. It turns red if an error is detected.

Yes, a 6-meter control cable is included with the Remote ICC control panel.

No, the On/Off switch on the ICC control panel does not fully power off the Mass Combi. The standby current remains below 5 mA, keeping the data buses connected to the control panels active.

When the Mass Combi is turned off via the ICC remote control panel, the no-load current draw is less than 5 mA.

To determine the exact dimensions required for installation, it is essential to refer to the diagrams in Figure 1 provided in the product's user manual.

The Remote ICC control panel complies with European Union Directives 2014/30/EU (EMC Directive) and 2011/65/EU (RoHS Directive).

The harmonised standards applied for the Remote ICC panel include:

EN 61000-6-3: 2007 + A1:2011 + AC:2012 (Emission for residential, commercial and light-industrial environments)
EN 61000-6-2: 2005 + AC:2005 (Immunity for industrial environments)

The Remote ICC control panel is specifically designed for operating and remotely controlling Mastervolt Mass Combi systems.

Before any installation, it is crucial to turn off the Mass Combi, disconnect the external AC power supply, and remove the DC fuses to ensure your safety and that of the equipment.

It is imperative that modifications to your electrical system are only carried out by qualified electricians, and that connections and safety features comply with local regulations.

The communication cable must be installed between the REMOTE input of the Mass Combi and the ICC panel. To do this, it is necessary to open the connection compartment of the Mass Combi.

Yes, installing the Remote ICC control panel requires cutting an opening in the mounting surface, following the dimensional diagrams provided in the product manual.

The standard warranty period for the Remote ICC control display is two years. Any installation not compliant with the user manual's guidelines, instructions, and specifications may void this warranty.