Kabel NMEA 2000 Micro-C, zahnutý 40 cm

The angled connector is specifically designed for installations in confined spaces, such as behind a dashboard or near a bulkhead. It allows easier connection and reduces mechanical stress on the device port, preventing damage to the connections.

Yes, this cable is fully compatible with all NMEA2000-certified equipment, regardless of brand. It can be used without issue with Garmin, Raymarine, Furuno, Simrad, Lowrance, or B&G devices featuring a Micro-C port.

The Micro-C connector is the standard 5-pin connector used for NMEA2000 networks. It provides a reliable and watertight connection for data transfer and power between the various devices in your marine network.

Technically, NMEA 2000 cables are interchangeable. However, due to its short 40 cm length, this cable is primarily intended for use as a drop cable to connect a device (display, transducer, antenna) to a T-connector on the backbone.

Yes, this cable is designed for marine environments. NMEA 2000 Micro-C connectors provide excellent protection against moisture and vibrations, typically meeting a high waterproof rating (often IPX7) when properly tightened.

NMEA2000 and NMEA 0183 are two different communication protocols.

NMEA2000 is a more modern "plug-and-play" network that allows multiple devices to communicate simultaneously over a single cable. NMEA 0183 is an older protocol requiring more complex wiring. This cable is only compatible with the NMEA2000 standard.

No, no specific tool is required. Micro-C connectors are designed to be hand-tightened. Simply ensure the connection is properly tightened to guarantee waterproofing.

Absolutely. Simrad and Lowrance are owned by Navico, so compatibility is perfect. Additionally, the NMEA 2000 standard guarantees interoperability between all certified brands.

An NMEA 2000 network allows all your compatible marine electronic devices to communicate and share data. For example, your GPS can send its position to your VHF radio and autopilot, all via a single, easy-to-install network.

No, this cable is used to connect a device to the network for data exchange. The NMEA 2000 network power must come from a dedicated NMEA 2000 power kit, which connects to a 12V source and is inserted into the backbone via a specific T-connector.

No. Using a certified NMEA2000 cable like this one should not affect the warranty of your devices, as it complies with an industry standard. The NMEA2000 network is designed to be interoperable between brands.

No, the angle of the right-angle connector is fixed, typically at 90 degrees. You must therefore check the orientation of the port on your device to ensure the cable exits in the desired direction after connection.

Yes, NMEA 2000 compliant cables are equipped with internal shielding to protect data signals from potential electromagnetic interference (EMI) originating from other cables or onboard devices.

Yes, you can absolutely replace a straight NMEA2000 Micro-C cable with this angled model. It's a good solution if the straight cable puts strain on the connector or takes up too much space behind the device.

The 5 pins of an NMEA 2000 Micro-C connector have specific functions for the network:

NET-S (V+): Positive power supply (red)NET-C (V-): Negative power supply (black)NET-H: High data signal (white)NET-L: Low data signal (blue)Drain: Shield (bare wire)