Bronzová průchozí sonda s kuželovým svazkem HIGH CHIRP, úhel 0°, CPT-S, 10m kabel

This transducer uses HIGH CHIRP conical beam technology. CHIRP (Compressed High-Intensity Radiated Pulse) scans a wide frequency band, delivering significantly improved target discrimination and image clarity compared to traditional fixed-frequency transducers. The conical beam ensures optimal coverage beneath the boat, helping to more precisely distinguish fish from underwater structures.

This transducer is made of bronze for its robustness and durability, particularly suited to saline marine environments. Bronze offers excellent resistance to corrosion and wear, making it a preferred choice for through-hull installations requiring long-term reliability.

The through-hull transducer with a 0° angle is specifically designed for hulls with little or no deadrise (keel angle) at the installation point. This ensures optimal orientation of the beam beneath the boat, allowing for accurate and efficient reading of the seabed.

No, it is not recommended to cut the depth sounder cable. Cutting the cable significantly reduces the fishfinder's performance. Moreover, this would void the product warranty and invalidate the European CE mark. The cable must be replaced if damaged, as it cannot be repaired.

To maintain the performance of your depth sounder and prevent the buildup of marine growth, it is recommended to apply a thin layer of water-based antifouling paint. This paint should be reapplied every 6 months or at the start of each sailing season. For cleaning, use a soft cloth and a mild household detergent. In case of severe fouling, a non-abrasive cleaning sponge can be used, taking care not to scratch the face of the transducer. Never use harsh solvents such as acetone or ketone-based paint, nor spray paint, as they can damage the transducer.

This transducer is designed to be compatible with Raymarine fishfinder modules and multifunction displays that support CHIRP technology from the CPT-S series. It requires connection to a compatible Raymarine fishfinder module to function correctly.

Raymarine recommends a certified installation performed by an authorized installer. Such an installation allows for improved warranty benefits for the product. It is advised to contact your Raymarine dealer for more details on specific conditions.

No, it is essential to test and use the transducer only in water. Operating the transducer out of water may cause overheating and damage the device.