Čerpadlo reverzační T3 - 24V

The Raymarine T3 24V pump (M81124) is designed for hydraulic steering systems equipped with cylinders having a capacity between 350 cc and 500 cc (21 to 30.5 cubic inches). It is compatible with single-acting or double-acting cylinders.

The Raymarine T3 reversible pump (M81124) is specifically designed to operate with a 24 V DC power supply.

The pump is designed for installation below deck only. It is critical to mount it on a substantial structure to minimize vibrations that could damage the hoses. Avoid mounting it near heat sources, excessive vibration, or fumes, and do not install it in confined areas containing flammable materials.

The Raymarine T3 pump integrates pilot-operated check valves. These valves prevent the pump from being driven in reverse by the manual steering system or by the rudder load. This contributes to ensuring increased stability and responsiveness of the autopilot.

Yes, the Raymarine T3 24V pump motor is IP67 certified. This rating ensures protection against temporary immersion and allows secure installation in engine compartments.

The Raymarine T3 24V pump (M81124) delivers a peak flow rate of 3100 cc/min (189.2 cubic inches per minute) when operating at no load.

For optimal EMC performance, it is recommended to use the cables specified by Raymarine and to provide a power supply separate from the engine starter battery. Additionally, Raymarine equipment and cables must be kept at least 1 meter away from equipment transmitting radio signals (such as VHF radios) and more than 2 meters from the path of a radar beam.

All hydraulic ports on the Raymarine T3 pump are 1/4 inch BSPP type (parallel thread). Rubber/metal seals are supplied with the pump, and 1/4 inch BSP to 1/4 inch NPT adapters may be required depending on your existing hydraulic system.