Čerpadlo reverzibilní T2 - 12V

The Raymarine T2 reversible pump 12V (reference M81121) is designed to operate the steering mechanism of a vessel as part of a Raymarine autopilot system. It is primarily intended for boats equipped with an existing hydraulic steering system. It can also be used on mechanically steered vessels in combination with a secondary steering cylinder.

The Raymarine Type 2 reversible pump is designed for medium to large steering systems, handling a cylinder capacity of 230 to 350 cc (14 to 21.4 cubic inches). For reference, the Type 0.5 handles 50-110 cc, the Type 1 handles 80-230 cc, and the Type 3 handles 350-500 cc.

This pump is powered by a 12 V DC permanent magnet motor. It is designed to operate at a typical current draw of 24 A at 12 V and 55 bar pressure. All pump ports are 1/4 inch BSPP type.

Yes, the Raymarine T2 pump is compatible with balanced or unbalanced rams. It can also be used with pressurized tank systems. Its design includes pilot-operated check valves that prevent feedback from the manual steering system or rudder load.

The T2 pump is designed exclusively for installation below deck. For optimal performance and to prevent vibrations that could damage the hoses, it must be mounted on a solid structure. It is critical to install it away from heat sources, excessive vibrations, and fumes, and not to mount it in confined areas containing flammable materials. Additionally, it must be installed above the waterline. Absolute cleanliness is essential during the installation of hydraulic systems to prevent dirt particles from affecting the operation of check valves.

Yes, the Raymarine T2 reversible pump motor has an IP67 protection rating, making it water-resistant. This design allows you to remove the motor from the pump without introducing air into the hydraulic system or causing fluid leaks.