Datový kabel QUANTUM 10 m

This A80275 data cable is specifically designed for the Raymarine Quantum radar range. It is compatible with the following models:

Quantum CHIRP pulse-compression radarsQuantum 2 Doppler radarsIt is not compatible with older Raymarine radar generations (e.g., HD Digital radomes).

No, this cable (reference A80275) is a data-only cable. It transmits radar data to your multifunction display. For radar power supply, you must use the separately sold Quantum power cable.

This data cable has a total length of 10 meters. It is an ideal length for most installations on sailboats or mid-sized motorboats.

Although the Quantum radar offers Wi-Fi connectivity, using this wired data cable has several advantages:

Maximum reliability: The connection is immune to radio interference or saturation of wireless networks.Optimal performance: It guarantees maximum bandwidth and zero latency for perfectly smooth radar display.Redundancy: It provides a secure backup solution if the Wi-Fi connection fails.

It is strongly advised against cutting or modifying this data cable. Such a modification could compromise signal integrity, degrade radar performance, and void the warranty. It is preferable to select a Raymarine cable of the appropriate length for your installation.

This cable is designed to connect a Quantum radar to most recent Raymarine multifunction displays that have the appropriate connection port, including the Axiom, eS and gS series. It is not compatible with displays from other brands.

Yes, cable A80275 is supplied ready for use with the specific connectors pre-installed at each end for direct connection to the Quantum radome and the Raymarine multifunction display.

The weight of the 10-meter Quantum data cable is approximately 0.45 kg (1 lb), reflecting its robust design and high-quality shielding for marine use.

Yes, Raymarine offers this Quantum data cable in multiple lengths to suit different boat sizes and installation configurations. If 10 meters is not enough, longer versions are usually available.

Absolutely. This cable is marine-grade, designed to withstand the harshest environments. It is treated to endure prolonged exposure to UV, saltwater humidity, and the boat's constant vibrations.

No, it is not recommended to use extensions with high-speed data cables like this one. Adding intermediate connections can weaken the signal and cause data loss. For optimal performance, it is imperative to use a single Raymarine cable of the correct length.

The manufacturer reference for this 10-meter Quantum data cable is Raymarine A80275.

The cable connector plugs into the dedicated data port located under the Quantum radar radome housing. The location is clearly marked to prevent connection errors with the power port.

No, this cable is a specific radar data cable, similar to an Ethernet cable, and does not connect to the SeaTalkng network. It establishes a direct and dedicated link between the Quantum radar and a Raymarine multifunction display.

The primary function of cable A80275 is to establish a stable, high-speed wired data connection between a Raymarine Quantum radar radome and a compatible Raymarine multifunction display (MFD), ensuring the transmission of radar imagery and commands.

No special tools are required to connect the plugs. However, basic tools will be needed for running the cable through bulkheads and decks of your boat (fish tape, drill, etc.) to ensure a clean and secure installation.

Yes, it is common and practical to run the data cable and power cable together from the mast or the arch to the console. Just make sure they are properly secured to prevent wear from friction.

Yes, the cable is designed with high-quality shielding to ensure immunity to electromagnetic interference (EMI), which is crucial in a marine environment where many electronic devices coexist.

No, this cable is equipped with proprietary connectors designed exclusively for connecting a Quantum radar to a compatible Raymarine multifunction display. It cannot be used for a direct connection to a computer.

References A80275 and A80276 refer to completely different cable types. Model A80275 is 10 meters long, while model A80276 is a 3-meter RayNet female to SeaTalkHS male adapter cable. The 15-meter Quantum data cable corresponds to reference A80310.