Cable Y Raymarine A80605 0,5 m pour pack sondes HyperVision HV-300

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 2%

Raymarine

A80605

Kabel Y 0,5 m pro sadu sond Raymarine HV-300 HyperVision

Conçu pour les systèmes de sonde Raymarine HyperVision, le câble Y A80605 de 0,5m est un accessoire essentiel pour connecter un pack de sondes HV-300. Il assure une intégration fiable et une transmission de données optimale pour vos sondes traversantes. Ce produit inclut uniquement le câble Y de 0,5m.

Prix publicBénéficier du tarif pro

139,90€

139,90€ ~~144,00€~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ konektoru	Connecteur propriétaire Raymarine
Typ kabelu	Câble Y blindé
Délka kabelu	0.5
Kompatibilní síť	Système de sondeur Raymarine HyperVision
Drátová síť	Raymarine HyperVision
Provozní napětí	30 V DC
Provozní teplota	-25°C à +55°C
Teplota při skladování	-25°C à +70°C
Stupeň krytí IP	IPX7
Certifikace	CE,Conformité CEM (2014/30/EU)
Typ výrobku	Accessoire de câblage
Kompatibilní modely	Sondes Raymarine HV-300 HyperVision, écrans multifonctions Raymarine Axiom, Raymarine Element

Accessoires

T-konektor SeaTalk NG

27,61€

27,61€ ~~30,00€~~

Koupit

5cestný konektor SeaTalk NG

46,37€

46,37€ ~~48,00€~~

Koupit

Description détaillée

Kabel Y A80605 o délce 0,5 metru je navržen speciálně pro připojení sond Raymarine HV-300 HyperVision. Jedná se o nezbytnou součást pro optimální integraci vašeho sonaru. Zajišťuje současné propojení všech prvků sady sond HV-300 a zaručuje bezproblémový přenos dat technologie HyperVision.

Funkce a systémová integrace

Tento kabel Y slouží k přenosu signálů ze sond HV-300, které využívají technologie DownVision, SideVision a RealVision pro detailní podvodní zobrazování. Délka 0,5 metru je vhodná pro instalace, kde jsou body připojení sond blízko u sebe, minimalizuje tak prostorovou náročnost a zjednodušuje kabeláž v omezených prostorech. Hlavním cílem je zachování integrity signálu pro výkon skenování technologie HyperVision, což je klíčové pro identifikaci struktur a ryb.

Umístění a kompatibilita

Na rozdíl od standardních prodlužovacích kabelů je kabel Raymarine A80605 specifickým prvkem architektury HyperVision společnosti Raymarine. Působí jako nezbytný doplněk pro pokročilé konfigurace systému HV-300, často používaný společně s multifunkčními displeji Axiom nebo Element, kde je kvalita podvodního zobrazování prioritou. Liší se od kabelů pro sondy HV-100 (pro zadní panel) nebo montážních sad pro elektromotory HV-100 (A80557), protože je určen výhradně pro sady průchozích sond HV-300, čímž zaručuje kompatibilitu a výkon s těmito specifickými snímači.

Documentations

Type	Nom
	EN - Installation manual - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Installation manual - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Installation instructions - Y cable 0.5m for HV-300 HyperVision probe pack
	EN - Installation manual - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Mounting template - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Mounting template - Y 0.5m cable for HV-300 HyperVision sensor pack
	EN - Installation manual - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Installation manual - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Installation manual - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Mounting template - Y cable 0.5m for HV-300 HyperVision sensor pack
	EN - Mounting template - Y cable 0.5m for HV-300 HyperVision sensor pack

Avis de l'expert

Pol CONIN

Digitální manažer

« Optimal integration of HyperVision HV-300 transducers »

The Raymarine A80605 cable is a key component for installing HV-300 HyperVision sonar packs, particularly for setups requiring multiple through-hull transducer connections or systems where signal splitting is needed. Its purpose is to ensure signal integrity for Raymarine's advanced imaging technologies (DownVision, SideVision, RealVision).

At 0.5 meters in length, this cable is ideal for installations where the processing unit or multifunction display is located close to the transducer connection points, or for interconnecting transducers in confined spaces. It simplifies wiring by eliminating the need for multiple long cables, reducing interference risks and installation complexity. It is critical to ensure connections are watertight and secure to maintain HyperVision system performance.

Unlike generic extension cables, the A80605 is a proprietary Raymarine accessory designed to integrate seamlessly with the HyperVision architecture. It is specifically intended for HV-300 sonar transducers, which are often through-hull models (HV-300TH), providing a dedicated solution for optimal sonar performance. Using a non-Raymarine or incompatible cable could degrade the image quality of DownVision, SideVision, and RealVision sonar transducers.

It is important to note that its short length (0.5m) makes it unsuitable for installations requiring long distances between transducers or between the transducer and the main unit. In such cases, specific Raymarine extension cables would be required as additional components.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Kabel Y 0,5 m pro sadu sond Raymarine HV-300 HyperVision

139,90€

139,90€ ~~144,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine A80605 0.5m Y-cable used for?

The Raymarine A80605 cable is an essential component designed for integrating Raymarine HV-300 HyperVision transducers. It enables simultaneous connection of all HV-300 transducer pack elements, ensuring lossless HyperVision data transmission for detailed underwater imaging.

What is the length of this Y A80605 cable?

The Raymarine A80605 Y-cable has a length of 0.5 meters. This dimension is specifically suited for installations where the connection points of the transducers are close together, helping to minimize clutter and simplify wiring in confined spaces.

Which depth sounder technologies are supported by this Y-cable?

This Y-cable is specifically designed for HV-300 HyperVision transducers, which use DownVision, SideVision, and RealVision technologies. It ensures signal integrity for HyperVision scanning performance, critical for identifying structures and fish.

With which Raymarine transducer models is the Y A80605 cable compatible?

The Raymarine A80605 cable is exclusively compatible with Raymarine HV-300 HyperVision through-hull transducer kits. It is a specific component designed for Raymarine’s HyperVision transducer architecture.

Can I use this Y cable with a Raymarine HV-100 transducer?

No, cable Y A80605 is not compatible with Raymarine HV-100 transducers. It is specifically designed for HV-300 HyperVision through-hull transducer packs and must not be used with other transducer models, including HV-100 (for transom-mount) or HV-100 electric motor mounting kits (A80557).

Which Raymarine multifunction displays are compatible with this cable and the HV-300 transducers?

This Y-cable, used with HV-300 transducers, is compatible with Raymarine multifunction displays that support HyperVision technology, such as the Axiom or Element series. The purpose is to deliver underwater imaging quality essential for these systems.

What is the advantage of using a 0.5m Y-cable for installing the HV-300 depth sounders?

The main advantage of a 0.5-meter Y-cable is to simplify wiring and minimize clutter. It is ideal for installations where the connection points of the HV-300 transducers are close together, allowing for a cleaner and more efficient integration of the fishfinder system while maintaining signal integrity.

Is the Y A80605 cable difficult to install?

Installing the Y A80605 cable is designed to be straightforward. This is a connection accessory that plugs directly between the HV-300 transducers and the compatible main unit or display. Its 0.5-meter length makes integration into existing HyperVision system architectures easier without requiring specific tools for the cable itself, beyond transducer installation.