SeaTalk kabel 5 m

The SeaTalk protocol is a proprietary communication standard developed by Raymarine to enable its marine instruments (autopilots, displays, fishfinders, GPS) to communicate with each other. It is an older protocol that has been gradually replaced by SeaTalkNG, Raymarine's implementation of NMEA 2000.

This SeaTalk Raymarine D286 cable is 5 meters long, making it ideal for extending your existing network or connecting distant instruments.

This cable is designed for extending and maintaining existing SeaTalk instrument networks. It allows connecting compatible devices to the SeaTalk protocol, replacing a damaged cable, or adding an additional SeaTalk instrument to an existing setup.

The SeaTalk D286 cable is specifically designed for owners of vessels equipped with older Raymarine instruments using the SeaTalk interface. Newer Raymarine instruments typically use the SeaTalkNG protocol (NMEA 2000), with which this cable is not directly compatible without a dedicated conversion gateway.

No, this SeaTalk cable does not allow direct connection to NMEA 2000 networks. The SeaTalk protocol is distinct from NMEA 2000. To connect SeaTalk instruments to a NMEA 2000 network, a dedicated conversion gateway (such as a SeaTalk to SeaTalkNG converter) is required.

No, this cable is designed for the original SeaTalk protocol and is not directly compatible with SeaTalkNG systems. SeaTalkNG is Raymarine’s implementation of NMEA 2000, a different protocol. A conversion gateway is required for interconnection.

This SeaTalk cable ensures stable data transmission for navigation information between compatible devices. This includes data such as depth, boat speed, wind speed and direction, as well as GPS position.

Instruments using the original SeaTalk protocol are typically older Raymarine models. They can be identified by their specific connectors (often 3-pin connectors) and the "SeaTalk" marking on the connection port. Your instrument manuals may also confirm the protocol used.

Yes, like all Raymarine cables designed for marine use, the SeaTalk D286 cable is built to withstand harsh marine conditions, including humidity and temperature variations.

Yes, this cable is specifically designed for extending your existing SeaTalk network. You can use it to increase the range of your network or to connect additional instruments remotely, following SeaTalk network installation best practices.

Yes, the SeaTalk D286 cable is a complete extension cable and is fitted with standard SeaTalk connectors at each end, ready to be plugged into your instruments and existing network.

Yes, if your Raymarine autopilot uses the original SeaTalk protocol, this 5m D286 cable is perfectly suited to connect it to your network or to other SeaTalk-compatible instruments.

SeaTalk is Raymarine's original proprietary protocol for its instruments, while SeaTalkNG is Raymarine's implementation of the NMEA 2000 industry standard. SeaTalkNG offers higher data rates, greater interoperability, and more advanced features than the original SeaTalk.

No, the SeaTalk protocol is a proprietary standard from Raymarine. This cable is designed to be compatible only with Raymarine instruments that use this specific protocol. It is not compatible with instruments from other brands.

The SeaTalk protocol carries both data and power for connected instruments. However, the power provided depends on the power source of the SeaTalk network itself. Ensure your SeaTalk network is properly powered to support all connected instruments.

To ensure you buy the correct cable, check the protocol type used by your existing Raymarine instruments. If your devices are older models and have "SeaTalk" marked on their ports, then this D286 cable is the right choice. For newer systems, you will likely need SeaTalkNG (NMEA 2000) cables.

Yes, the 5m SeaTalk D286 cable is suitable for replacing a damaged SeaTalk cable to restore the functionality and integrity of your existing instrument network.

This Raymarine D286 cable is covered by the manufacturer's standard warranty. For specific details regarding the duration and warranty conditions, please refer to the information provided by Raymarine or contact our customer service.

The SeaTalk cable is a data cable that also transmits electrical power to instruments connected to the SeaTalk network. It handles both navigation data communication and power supply for compatible devices.

Generally, extension cables like the D286 do not come with a detailed installation manual, as their connection is standard. For complete information on installing and configuring your SeaTalk network, it is recommended to consult the manual of your Raymarine instruments or the SeaTalk system installation guide.