Sonde traversante 0° inox RV 400 , branchement direct Axiom (câble 8 m)

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 10%

Raymarine

A80615

Sonda 0° průchozí z nerezové oceli RV 400, přímé připojení k Axiom (kabel 8 m)

La sonde traversante Raymarine RV-400 en inox avec inclinaison de 0° est conçue pour une intégration directe avec les écrans multifonctions Axiom. Elle exploite la technologie RealVision 3D pour une imagerie sous-marine détaillée, incluant DownVision, SideVision, CHIRP et 3D. Cette solution, idéale pour les coques planes, se positionne comme une alternative complète aux sondes CHIRP traditionnelles.

Inclus : Sonde RV-400 en acier inoxydable, câble intégré de 8 mètres pour connexion directe Axiom.

Prix publicBénéficier du tarif pro

1.126,45€

1.126,45€ ~~1.254,00€~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Podporované technologie sonaru	RealVision 3D,DownVision,SideVision,CHIRP haute fréquence
Provozní napětí	12 V
Frekvence sonaru	200 kHz, 350 kHz
Provozní teplota	-15°C à +55°C
Maximální hloubka odečtu	274.0
Materiál sondy	Inox
Typ konektoru sonaru	Connecteur RealVision 25 broches
Délka kabelu	8.0
Šířka produktu	114.00 mm
Integrovaný teplotní čidlo	Oui
Výška produktu	180 mm
Kompatibilní zobrazovače	Raymarine Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL, Axiom 2 XL
Stupeň krytí IP	IPx8
Bezpečná vzdálenost od kompasu	50 cm
Typ montáže	Traversante
Certifikace	CE,IEC 60945
Rozsah měření teploty vody	-5°C à +40°C
Úhlové pokrytí paprskem	180°
Vysoká frekvence CHIRP	200 kHz
Typ rybolovu	Mer, Lac, Pêche sportive
Integrovaný snímač rychlosti	Non
Rok uvedení na trh	2023.0

Accessoires

Kabel 1 metr SeaTalk NG F / DeviceNet (NMEA 2000) F)

54,41€

54,41€ ~~60,00€~~

Koupit

Câble Adaptateur Femelle Devicenetraymarine A06045

Adaptér STNG – kabel k hlavní sběrnici, samice STNG → samice DeviceNet, 400 mm

41,53€

41,53€ ~~48,00€~~

Koupit

Kabel SeaTalk NG / Devicenet NMEA2000 samice (400 mm)

48,96€

48,96€ ~~54,00€~~

Koupit

Kabel SeaTalk NG 1 metr (odbočka)

41,58€

41,58€ ~~48,00€~~

Koupit

5cestný konektor SeaTalk NG

46,37€

46,37€ ~~48,00€~~

Koupit

T-konektor SeaTalk NG

27,61€

27,61€ ~~30,00€~~

Koupit

Description détaillée

Určena pro přímou integraci s multifunkčními zobrazovači Raymarine Axiom. Sonda průchozí RV-400 z nerezové oceli představuje řešení pro podvodní detekci. Tento snímač integruje technologii RealVision 3D, která kombinuje funkce DownVision, SideVision, vysokofrekvenční sonar CHIRP a 3D zobrazení. Tato všestrannost umožňuje detailní průzkum vodního sloupce a podmořských struktur, čímž optimalizuje navigaci a detekci ryb.

Konstrukce a instalace

Vyrobena z nerezové oceli je RV-400 určena pro ploché trupy s náběhem 0° v místě instalace. Její průchozí konstrukce zajišťuje stabilní a konstantní sonarový výkon i při vysokých rychlostech, protože není ovlivňována turbulence způsobené zádě. Součástí balení je 8metrový kabel, který umožňuje přímé a zjednodušené připojení k MFD Axiom a snižuje složitost instalace.

Umístění a kompatibilita

Ve srovnání s tradičními CHIRP sondami, jako jsou CPT-S, CPT-100/120 od Raymarine, se RV-400 řadí mezi komplexní řešení. Nabízí pokročilé funkce bočního a 3D skenování navíc k běžnému CHIRP sonaru. Představuje integrovanou alternativu k externím sonarovým modulům, jako jsou CP-370 nebo CP-470, čímž zjednodušuje architekturu systému pro uživatele Axiom. Tato sonda patří do řady RealVision od Raymarine a je kompatibilní s nejnovějšími verzemi softwaru LightHouse 4 pro MFD Axiom, Axiom+ a Axiom Pro.

Documentations

Type	Nom
	EN - Technical drawing - 0° stainless steel through-hull transducer RV 400, direct connection Axiom (8 m cable)
	EN - User manual - Thru-hull transducer 0° stainless steel RV 400, direct connection Axiom (8 m cable)
	EN - Technical drawing - 0° through-hull transducer stainless steel RV 400, direct connection Axiom (8 m cable)
	EN - Technical drawing - 0° stainless steel thru-hull transducer RV 400, direct Axiom connection (8 m cable)
	EN - Technical drawing - 0° stainless steel through-hull transducer RV 400, direct connection Axiom (8 m cable)
	EN - Technical drawing - 0° stainless steel through-hull transducer RV 400, direct Axiom connection (8 m cable)

Avis de l'expert

Pol CONIN

Digitální manažer

« Technical analysis: RealVision 3D through-hull transducer for Raymarine Axiom »

The Raymarine RV-400 through-hull transducer is a suitable choice for powerboats with a hull deadrise angle of 0° at the installation point. Its main advantage lies in the integration of RealVision 3D technology, providing detailed visualization of underwater structures, fish, and seabeds. This capability is particularly useful for fishing or navigating in shallow or cluttered waters, allowing precise identification of obstacles or concentrations of marine life.

Installing this through-hull transducer requires drilling the hull. It is critical to select a location where water flow is laminar and free of turbulence to ensure optimal sonar performance, especially at high speeds. The stainless steel housing provides enhanced mechanical strength and durability in marine environments, including saline conditions. The 8-meter cable, designed for direct connection to Axiom displays, simplifies wiring and reduces the need for intermediate modules, offering an advantage in installation complexity and potential failure points compared to modular systems.

Unlike transom-mount transducers, the RV-400 delivers consistent performance at high speeds and better signal penetration, as it is not subject to water separation. Its 0° tilt distinguishes it from models with angled elements (such as the RV-410 or RV-420) and must be strictly adhered to for suitable hulls. For deep-V hulls, other models with a compensated tilt angle would be more appropriate to maintain a vertical sonar beam.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sonda 0° průchozí z nerezové oceli RV 400, přímé připojení k Axiom (kabel 8 m)

1.126,45€

1.126,45€ ~~1.254,00€~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

AIS 700 Třída B s integrovaným splitterem antény

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What sonar technologies are integrated in the Raymarine RV-400 transducer?

The RV-400 sounder integrates Raymarine’s RealVision 3D technology. This technology combines multiple sonar features for detailed underwater visualization:

DownVision: For clear, photo-realistic images of structures and fish beneath the boat.SideVision: For a side view of the seabed and targets, enabling a wider area to be scanned.High-frequency CHIRP sonar: Provides precise fish and structure detection.3D visualization: Enables a three-dimensional representation of the underwater environment, making data interpretation easier.

For which type of hull is the Raymarine RV-400 through-hull transducer specifically designed?

The RV-400 through-hull transducer in stainless steel is designed for installation on flat hulls. It is specifically suited for installations where the hull angle is 0° at the mounting point. Its through-hull design ensures stable and consistent sonar performance, even at high speeds, as it is unaffected by turbulence generated by the transom.

Which Raymarine multifunction displays are compatible with the RV-400 transducer?

The RV-400 transducer is designed for direct integration with Raymarine multifunction displays. It is compatible with the Axiom series, including Axiom, Axiom+, and Axiom Pro MFDs, provided they run the latest LightHouse 4 software version. This compatibility ensures access to all advanced transducer features, including RealVision 3D technology.

What is the length of the RV-400 transducer cable, and can it be extended?

The RV-400 transducer comes with an integrated 8-metre cable for direct connection to Axiom multifunction displays. If additional length is required for installation, dedicated RealVision 3D transducer extension cables are available and can be used to extend the range.

Is calibration required after installing the RV-400 transducer?

Yes, after physically installing the RV-400 transducer, a calibration of the RealVision AHRS (Attitude and Heading Reference System) is required. This calibration optimizes the performance of the 3D visualization by compensating for the boat's heel and trim, ensuring an accurate representation of the seabed and targets. Calibration is performed via the Axiom multifunction display interface.

Can antifouling paint be applied to the Raymarine RV-400 depth transducer?

Yes, it is possible to apply antifouling paint to the RV-400 transducer to prevent marine fouling. It is recommended to use water-based antifouling paints or those specifically formulated for transducers, avoiding solvent-based products that could damage the transducer surface. It is important not to paint the active face of the transducer to avoid impairing its performance.

Can the RV-400 transducer replace an external Raymarine fishfinder module?

Yes, the RV-400 transducer is an all-in-one solution that can replace the need for an external fishfinder module for Axiom display users. It directly integrates advanced side-scanning, 3D, and conventional CHIRP sonar capabilities, simplifying system architecture compared to using external modules like the CP-370 or CP-470.

How can I register the warranty for my Raymarine RV-400 depth sounder?

To register the warranty for your Raymarine RV-400 transducer, you must visit the official Raymarine website. Product registration is recommended to fully benefit from the manufacturer's warranty support and services.