Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 12%

Raymarine

A80704

Sonda RVM-400 0° nerezová Raymarine RealVision 3D, přímé připojení k AXIOM2 a RVM1600 (kabel 8 m)

La sonde traversante Raymarine RVM-400 en inox (0°) offre les technologies RealVision 3D, DownVision, SideVision et CHIRP pour une imagerie sous-marine complète. Conçue pour un branchement direct aux écrans AXIOM2 et aux modules RVM1600, elle assure une intégration simplifiée. Cette sonde fait partie de la série RVM-400, offrant une alternative pour les coques à faible inclinaison, tandis que les RVM-412 (12°) et RVM-420 (20°) sont disponibles pour des angles de varangue différents. Inclus: la sonde RVM-400 avec un câble de 8 m.

Prix publicBénéficier du tarif pro

1.672,91€

1.672,91€ ~~1.914,00€~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Podporované technologie sonaru	RealVision 3D, DownVision, SideVision, CHIRP haute fréquence
Materiál sondy	Inox
Typ konektoru sonaru	Connecteur RealVision 25 broches
Délka kabelu	8.0
Kompatibilní zobrazovače	Raymarine Axiom, Axiom+, Axiom 2 Pro RVM, Axiom Pro, Axiom XL, et modules sondeur RVM1600
Bezdrátová konektivita	Non
Typ montáže	Traversante
Certifikace	CE, FCC, RCM
Vysoká frekvence CHIRP	150-230
Záruka	2.0

Accessoires

Kabel 1,5 m SeaTalk NG SPUR F / konektor Devicenet NMEA 2000 M

43,54€

43,54€ ~~48,00€~~

Koupit

Kabel 1 metr SeaTalk NG F / DeviceNet (NMEA 2000) F)

54,41€

54,41€ ~~60,00€~~

Koupit

Câble Adaptateur Femelle Devicenetraymarine A06045

Adaptér STNG – kabel k hlavní sběrnici, samice STNG → samice DeviceNet, 400 mm

41,53€

41,53€ ~~48,00€~~

Koupit

Kabel SeaTalk NG / Devicenet NMEA2000 samice (400 mm)

48,96€

48,96€ ~~54,00€~~

Koupit

Kabel SeaTalk NG 1 metr (odbočka)

41,58€

41,58€ ~~48,00€~~

Koupit

Zadní kabel SeaTalk NG 0.4 m

38,70€

38,70€ ~~42,00€~~

Koupit

Kabel páteřní SeaTalk NG 3 m

41,53€

41,53€ ~~48,00€~~

Koupit

5cestný konektor SeaTalk NG

46,37€

46,37€ ~~48,00€~~

Koupit

T-konektor SeaTalk NG

27,61€

27,61€ ~~30,00€~~

Koupit

Kabel 10 m RayNet F na RayNet F

149,41€

149,41€ ~~156,00€~~

Koupit

Description détaillée

Sonda RVM-400 od společnosti Raymarine poskytuje řešení pro sonary RealVision 3D pro navigační systémy s kompatibilitou. Navržena pro průchozí instalaci s úhlem 0°, tato nerezová sonda integruje technologie DownVision, SideVision, RealVision 3D a vysokofrekvenční sonar CHIRP, které poskytují detailní podvodní pohledy. Připojuje se přímo k multifunkčním displejům AXIOM2 a k modulům sonaru RVM1600, což zjednodušuje integraci do sítě Raymarine.

Integrované sonarové technologie

Sonda RVM-400 kombinuje několik sonarových technologií pro komplexní pokrytí mořského dna a vodního sloupce. DownVision a SideVision umožňují boční a vertikální detekci struktur a ryb, zatímco technologie RealVision 3D poskytuje trojrozměrnou reprezentaci podmořského světa. Vysokofrekvenční sonar CHIRP zajišťuje lepší rozlišení cílů a jasnost obrazu ve srovnání s pevnými frekvencemi. Tato sonda je klíčovou součástí série RVM-400, která zahrnuje také modely RVM-412 a RVM-420, lišící se úhly kompenzace pro různé sklony trupu.

Integrace a instalace

Sonda RVM-400 je navržena pro přímé připojení k displejům AXIOM2 a k modulům sonaru RVM1600, což eliminuje potřebu dalších adaptérů a zajišťuje optimální kompatibilitu. Dodávaný 8metrový kabel umožňuje umístění sondy na většině plavidel. Průchozí instalace z nerezové oceli zajišťuje bezpečné upevnění a odolnost v náročném námořním prostředí. Pro instalace vyžadující delší kabely jsou k dispozici prodlužovací kabely RealVision, které umožňují dosáhnout maximálních vzdáleností připojení.

Documentations

Type	Nom
	EN - Technical drawing - RVM-400 0° Stainless Steel Through-Hull Sonar, direct connection AXIOM2 and RVM1600 (8 m cable)
	EN - User Manual - RVM-400 0° Stainless Steel Through-Hull Sonar RealVision 3D, Direct Connection AXIOM2 and RVM1600 (8 m cable)
	EN - Technical drawing - RVM-400 0° stainless steel through-hull transducer RealVision 3D, direct connection AXIOM2 and RVM1600 (8 m cable)
	EN - Technical Drawing - RVM-400 0° Stainless Steel Through-Hull Sonar RealVision 3D, Direct Connection AXIOM2 and RVM1600 (8 m Cable)
	EN - Technical drawing - RVM-400 0° Stainless Steel Thru-Hull Transducer RealVision 3D, direct connection AXIOM2 and RVM1600 (8 m cable)
	EN - Technical drawing - RVM-400 0° Through-hull Sonar Stainless Steel RealVision 3D, direct connection AXIOM2 and RVM1600 (8 m cable)
	EN - Technical Drawing - RVM-400 0° Through-Hull Sonar Stainless Steel RealVision 3D, Direct Connection to AXIOM2 and RVM1600 (8 m Cable)

Avis de l'expert

Pol CONIN

Digitální manažer

« Technical analysis of the Raymarine RVM-400 RealVision 3D transducer »

The Raymarine RVM-400 through-hull transducer is a technical solution for recreational boaters and anglers equipped with an AXIOM2 system or an RVM1600 module. Its main advantage lies in its direct integration, which minimizes potential failure points and simplifies wiring. Unlike solutions with external adapter housings, this direct connection ensures RealVision 3D data transmission without latency, essential for real-time detection of structures and fish schools.

Choosing a 0° stainless steel through-hull transducer is suitable for hulls with minimal deadrise. For boats with a more pronounced deadrise angle, the RVM-412 (12°) or RVM-420 (20°) models from the same series would be better suited to optimize beam quality and prevent air bubbles. The integrated engineering of the RVM-400 allows precise AHRS (Attitude and Heading Reference System) calibration, ensuring stable 3D imaging even in rough seas. This is a significant advantage for users seeking consistent and reliable visualization.

Installation requires precise hull drilling, but electrical connection is simplified thanks to the direct connector. It is crucial to follow placement guidelines to avoid interference and ensure optimal sonar performance. This transducer is particularly recommended for mid-sized boats seeking a high-performance sonar imaging solution without the complexity of a modular system with additional interface housings.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sonda RVM-400 0° nerezová Raymarine RealVision 3D, přímé připojení k AXIOM2 a RVM1600 (kabel 8 m)

1.672,91€

1.672,91€ ~~1.914,00€~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Snímač-počítač EV1 Evolution

Ref : E70096

981,54€

981,54€ ~~1.110,00€~~

Raymarine

AIS 700 Třída B s integrovaným splitterem antény

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

Which sonar technologies are integrated in the Raymarine RVM-400 transducer?

The Raymarine RVM-400 transducer integrates several advanced sonar technologies for comprehensive underwater vision:

DownVision: Provides a detailed view of the seabed directly beneath the boat.SideVision: Scans lateral areas to detect structures and fish on the sides.RealVision 3D: Offers a three-dimensional representation of the underwater environment.High-frequency CHIRP sonar: Enhances target discrimination and image clarity.

What material is the RVM-400 transducer made of and what is its compensation angle?

The Raymarine RVM-400 transducer is made of stainless steel, ensuring durability and resistance in marine environments. It is designed for through-hull installation with a 0° compensation angle. This means it is ideal for hulls with a deadrise angle of 0° at the installation location.

What is the length of the cable supplied with the Raymarine RVM-400 transducer?

The Raymarine RVM-400 transducer comes with an integrated 8-meter (26.2-foot) cable. This length is designed to facilitate installation on most vessels.

Which Raymarine multifunction displays directly integrate compatibility with the RVM-400 transducer?

The Raymarine RVM-400 transducer is designed for direct connection to Raymarine AXIOM2 multifunction displays. These displays include RealVision technology required to process transducer data without an additional module.

Can the RVM-400 transducer be used with other Raymarine multifunction displays besides the AXIOM²?

Yes, the RVM-400 transducer is compatible with other Raymarine Axiom series multifunction displays, such as the Axiom 2 Pro, Axiom 2 XL, Axiom Pro, Axiom XL, and Axiom MFDs. For these models, the transducer must be connected to an RVM1600 sounder module.

What is the recommended installation type for the RVM-400 transducer?

The Raymarine RVM-400 transducer is a thru-hull type transducer. This means it is installed by drilling a hole in the boat's hull, allowing the transducer element to be directly exposed to the water beneath the hull for optimal performance.

Should antifouling be applied to the RVM-400 depth sounder?

Yes, it is recommended to apply antifouling to the RVM-400 transducer to prevent marine growth buildup. It is important to use a water-based antifouling specifically formulated for transducers to avoid affecting the sounder’s performance. Avoid metal-based antifoulings, which could interfere with the sonar signal.