Sada BLU námořní IC-M710

The IC-M710 marine BLU pack delivers a maximum output power of 150 W (PEP), ensuring extended communication range for maritime applications.

The IC-M710 BLU marine pack supports a wide range of transmission frequencies, including:

1.6 – 2.9999 MHz
4.0 – 4.9999 MHz
6.0 – 6.9999 MHz
8.0 – 8.9000 MHz
12.0 – 13.9999 MHz
16.0 – 17.9999 MHz
18.0 – 19.9999 MHz
22.0 – 22.9999 MHz
25.0 – 27.5000 MHz

The IC-M710 marine MF/HF radio can receive signals across a very wide frequency range, from 500 kHz to 29.9999 MHz.

Yes, the IC-M710 BLU marine pack has NMEA 0183 connectivity. This allows it to integrate GPS positioning data from other compatible navigation equipment, which is essential for Digital Selective Calling (DCS) functions if a DCS controller is connected.

For optimal operation of the IC-M710, a dedicated marine MF/HF antenna is recommended. These antennas are typically vertical whips designed to cover the frequency bands used by the radio. The use of an automatic antenna tuner (ATU) is also highly recommended to tune the antenna across different frequencies and maximize transmission efficiency.

Yes, the use of an automatic antenna tuner (ATU) such as the Icom AT-130 or AT-140 is highly recommended with the IC-M710. An ATU adjusts the antenna impedance to match the radio across all frequencies, ensuring efficient transmission and reception while protecting the transmitter.

The IC-M710 BLU marine pack is designed to operate on a 13.6 V DC power system, typical of 12 V marine electrical installations. It is critical to ensure a stable power supply and sufficient capacity to support the radio's current consumption, especially when transmitting at full power.

The IC-M710 supports multiple operating modes for marine communication, including:

J3E (SSB): Single Sideband for long-distance voice communications.
H3E (AM): Amplitude Modulation.
R3E (ARQ): For data communications.
F1B (FSK): Frequency Shift Keying, for data communications such as telex.
A1A (CW): Continuous Wave, for Morse code telegraphy.

The IC-M710 is an MF/HF transceiver that can be part of a GMDSS (Global Maritime Distress and Safety System) installation for non-SOLAS vessels. It meets the long-distance communication requirements for GMDSS, particularly when paired with an external DSC controller.

Yes, the BLU marine IC-M710 Pack is usually supplied with a standard hand microphone to enable voice communications immediately upon installation.

Thanks to its NMEA 0183 connectivity, the IC-M710 can receive positioning data from an external GPS receiver. This information is critical for Digital Selective Calling (DSC) functions, allowing distress messages including the vessel's exact position to be sent if a DSC controller is connected.

Yes, the IC-M710 is equipped with a large, clear LCD screen and a 10-key numeric keypad. This design ensures excellent readability and intuitive operation, even in low-light conditions or when the boat is moving.

The term "Pack" in "IC-M710 marine VHF Pack" indicates that it is a bundle including the Icom IC-M710 transceiver and its essential accessories for a basic installation and operation. Typically, this includes the main unit, a hand microphone, a DC power cable, and a mounting bracket kit.

Yes, the IC-M710 includes scanning (scan) functions to effectively monitor channels. This allows users to scan memory channels or ITU channels to detect transmissions and avoid missing any important communications.

Yes, the IC-M710 is generally equipped with an audio output for connecting an external speaker. This can be useful for improving listening clarity in noisy environments or for broadcasting audio to different areas of the vessel.

The Icom IC-M710 marine BLU pack comes with the manufacturer's standard warranty. For specific details regarding warranty duration and conditions, refer to the documentation provided with the product or contact customer service.

Installing the IC-M710 requires knowledge of marine electronics and radio frequency, particularly for power wiring, antenna connection, and automatic antenna tuner integration, as well as NMEA setup. While the user manual provides detailed instructions, it is often recommended to use a qualified professional to ensure correct and secure installation compliant with maritime standards.