Vodorovný průchod pro kabely Ø 2 až 6 mm – kompozitní šedá

The Scanstrut DS-H6 horizontal cable gland is designed to provide professional waterproofing when routing cables through a deck or bulkhead on a boat. It protects connections from water ingress and helps maintain cable integrity.

The Scanstrut DS-H6 deck gland is made of gray composite, a robust and durable material specifically designed to withstand marine environmental conditions.

The Scanstrut DS-H6 is specifically designed for horizontal installation, allowing cable routing flat on a surface such as a deck or bulkhead.

The DS-H6 through-hull kit includes:

An upper hullA baseA watertight gasketA blank plug to drillFive pre-drilled plugs for 2, 3, 4, 5 and 6 mm cablesThree self-tapping screwsAn M4x12 bolt

Yes, the DS-H6 deck gland is designed to provide professional sealing. It comes with a sealing gasket and specific plugs to protect the cable passage from water ingress.

The DS-H6 deck gland is compatible with cables with a diameter between 2 and 6 mm. Pre-drilled plugs are supplied for diameters 2, 3, 4, 5 and 6 mm.

No, the DS-H6 through-hull fitting is designed for a single cable at a time. One plug is used per through-hull fitting to ensure optimal watertightness.

Yes, the DS-H6 deck gland is ideal for wiring antennas, sensors, small electrical bundles or other marine applications requiring the passage of a small-diameter cable (2 to 6 mm).

Installing the DS-H6 through-hull adapter requires drilling a 28.50 mm (1.12 in) diameter hole in the mounting surface.

For the installation of the DS-H6 deck pass-through, you will need the following tools:

A Pozi screwdriver Silicone sealant (for waterproofing) Drill bits: ø2.5 mm (3/32”), ø3 mm (1/8”), and ø10 mm (25/64”) A 3 mm (1/8”) Allen key

You must select the pre-drilled bung whose diameter is closest to and slightly larger than or equal to your cable’s diameter to ensure optimal sealing. The kit includes bungs for diameters 2, 3, 4, 5, and 6 mm.

If the diameter of your cable does not match the pre-drilled plugs provided, you can use the blank plug included in the kit. It can be custom-drilled to the exact diameter of your cable.

Yes, using silicone is recommended during installation to ensure a perfect seal between the through-hull base and the mounting surface, thereby preventing any water ingress.

Yes, as a Scanstrut product designed for the marine sector and made of composite, the DS-H6 is specifically designed to withstand harsh marine conditions, including UV exposure, saltwater, and weathering.

The main difference lies in the maximum cable diameter supported. The DS-H6 is designed for cables from 2 to 6 mm, while the DS-H10 is suitable for larger diameters, up to 10 mm. The DS-H6 offers a more compact solution for smaller diameters.