Sada ROKK Mini – držák smartphonů pro rovné montáže

The ROKK Mini Kit is designed to accommodate smartphones with a width between 45 mm and 95 mm (1.77 to 3.74 inches). This wide compatibility range allows most models on the market to be mounted, with or without a protective case. The ratchet clamp adjusts easily to the thickness of your device.

Yes, the ROKK Mini accommodates smartphones with a maximum width of 95 mm. If your phone, including its case, does not exceed this width, it can be installed without issues. The ratchet clamp and rubber anti-slip coating ensure a secure hold even with a thick case.

The ROKK Mini mount can support a maximum load of 1.2 kg (2.65 lbs). This capacity is more than sufficient for all smartphones on the market, including heavy models such as foldable phones or robust designs.

For installation, you will need:

A 2.5 mm (3/32 inch) drill bit to pre-drill the holes A Pozidriv screwdriver to screw in the base Marine-grade sealant (recommended for watertight marine installation) A 5 mm Allen key to secure the mount body to the base These tools are not included in the kit.

Yes, the ROKK Mini offers 360° rotation. You can therefore position your smartphone in your preferred orientation, whether in portrait or landscape mode, for optimal visibility while sailing.

Yes, this mount is designed by Scanstrut, a brand specializing in marine equipment. It withstands harsh nautical conditions: vibrations, spray, UV, and temperature variations. The screw-mounted design provides strong mechanical holding, ideal for powerboats or sailboats.

This specific model (ref. RLS-509-401) is supplied with a screw-down base (RLS-401) and four self-tapping screws. This is not the adhesive-mount model. If you prefer a no-drill installation, Scanstrut also offers the ROKK Mini Adhesive Mount with 3M high-performance adhesive.

Yes, the screw-down base can be mounted on any flat surface, whether horizontal or vertical. Simply ensure no obstacle interferes with the movement or removal of the mount body. For vertical installation, verify the surface is sufficiently sturdy to support the phone's weight.

Yes, the ROKK Mini accommodates smartphones with a width of 45 to 95 mm. Recent iPhones, including Pro Max models, fall within this range. For example, an iPhone 15 Pro Max measures approximately 77.6 mm in width, which is fully compatible, even with a case.

Yes, the kit includes a phone clamp that attaches to the mount body. The clamp is designed to open and close easily using a ratchet system, allowing quick insertion and removal of your smartphone.

The base holes have a diameter of 4.2 mm (0.17 in). To pre-drill, use a 2.5 mm (3/32 in) drill bit to avoid cracking the mounting surface. The supplied No. 4 x 20 self-tapping screws are suitable for these dimensions.

Yes, the ROKK Mini can be mounted on any rigid flat surface, such as the deck of a kayak or paddleboard, provided you can drill and screw securely. However, for lightweight boats, ensure the surface is thick enough to accommodate the screws without risk of breaking through the other side.

To preserve the longevity of the mount, rinse it with fresh water after each use at sea to remove salt and residue. Use a soft cloth and soapy water if necessary. Avoid abrasive products that could damage the rubber coating or the finish.

Yes, the Samsung Galaxy S24 Ultra is approximately 79 mm wide, which is within the ROKK Mini’s 45–95 mm range. It will fit without issues, even with a standard protective case.