Yanmar Sail Drive SD60-5 adapter plate

It serves as a rigid mounting bracket for installing the Integrel high-power generator on your marine transmission. It ensures perfect alignment between the generator and the marine transmission (Sail Drive).

The Integrel system replaces a generator and produces very high mechanical torque. A standard mount could bend or create vibrations. This plate is specifically sized to withstand these significant stresses.

This mounting plate is exclusively designed to fit Yanmar Sail Drive SD60-5 struts.

No, the machining and mounting points are specific to the Yanmar SD60-5 leg geometry. It is not compatible with transmissions from other manufacturers.

This high-precision mechanical component is machined in the United Kingdom, ensuring excellent manufacturing quality to withstand demanding marine environments.

No, the plate is designed to fit perfectly with the existing mounting points of your Sail Drive SD60-5, without requiring drilling or structural modifications to your engine.

Poor installation or misalignment will inevitably cause significant vibrations and premature wear of the belts and bearings in your power generation system.

Although the part fits the original mounts, integrating a high-power generation system requires absolute mechanical rigor. It is strongly recommended to entrust this task to a professional installer.

Yes, this plate is made with robust materials suitable for the marine environment. However, Integrel recommends keeping engine mounts dry to prevent corrosion of system components.

No, the mounting plate is installed directly on the internal part of the Sail Drive housing, accessible from the engine compartment. Hauling out the vessel is not required for this mechanical operation.

No, it is specifically designed to support the significant weight and torque of the Integrel high-power generator, not a standard marine alternator.

You can verify the exact model of your transmission by checking the identification plate fixed directly on the Sail Drive housing in your engine room, or by referring to your boat’s technical manual.

No, the plate only provides a secure mechanical connection. The Integrel system is designed to use only the engine’s excess power without compromising propulsion integrity or performance.

Thanks to its ultra-precise machining, it ensures exact mounting geometry and perfect alignment of the pulleys. This eliminates abnormal friction and significantly extends the belt service life.

The plate itself does not require specific maintenance, but it is strongly recommended to visually inspect its condition and check the tightening torque of the mounting bolts during the annual service of your Yanmar engine.

No, the geometry and mounting points differ greatly between strut models. This reference (ISD0013) is strictly reserved for the SD60-5 version.

Choosing the original Integrel plate guarantees you a part that has been tested, validated by the manufacturer, and perfectly sized to absorb the specific torque of this generator—a guarantee that a custom-made part cannot provide without expensive engineering calculations.

The plate is designed to ensure secure mounting. Additionally, the Integrel system as a whole reduces overall boat vibrations by eliminating the need for an independent generator.

Alignment must be meticulously checked using precision tools (such as a pulley alignment laser) by the technician in charge of the installation, and this must be done before the final tensioning of the Integrel system belts.

Yes, absolutely. If your catamaran is equipped with Yanmar engines coupled to Sail Drive SD60-5 pods, this plate will fit perfectly in each of your engine bays to accommodate the Integrel system.