10FT Blue UTP Slim CAT6 28AWG Ethernet/Network Cables

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Amphenol

MP-64RJ4528GB-010

10FT Blue UTP Slim CAT6 28AWG Ethernet/Network Cables

UTP SLIM CAT6 28AWG Ethernet/network cables, blue, 10FT for data or Ethernet connections aboard, compatible with AMPHENOL installations. Length: 10 ft.

Retail priceBenefit from the professional rate

$19.00 USD

$19.00 USD ~~$21.00 USD~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	RJ45
Cable segment	Marine data network / Ethernet
Cable type	Cat6 Ethernet cable
Compatibility Scope	Exact reference of the equipment to verify before ordering
Environment	Marine installation
Installation Advice	plan separate routing for high-power cables and avoid tight bends
Installation Check	the connector type, network category, and usable length between devices
Length	10 ft
Length Ft	10
Network protocol	Ethernet
Product Usage	Battery bank
Skysat Usage	data or Ethernet connection onboard

Detailed description

UTP SLIM CAT6 28AWG blue Ethernet/network cables 10FT are Ethernet cables designed for data or Ethernet connections aboard. They complement an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.

This sheet belongs to the Marine Data Network/Ethernet category. Length indicated: 10 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.

For reliable installation, route cables away from high-power lines and avoid tight bends. Also check the connector type, network category, and usable length between devices before sealing cable passages.

Documentation

Type	Nom
	MP_64RJ4528GX-2634485 (4).pdf

Expert opinion

Pol CONIN

Digital Manager

« Skysat Review - UTP SLIM CAT6 28AWG Ethernet/network cables blue 10FT »

Skysat advice: select this cable based on the equipment to be connected, not just the available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through the mast, roof, or damp area, leave a service loop, protect the connections, and avoid intermediate splices. This prevents many difficult troubleshooting sessions after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

10FT Blue UTP Slim CAT6 28AWG Ethernet/Network Cables

$19.00 USD

$19.00 USD ~~$21.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of Ethernet/network UTP SLIM CAT6 28AWG blue 10FT cables?

Ethernet/network UTP SLIM CAT6 28AWG blue 10FT cables are used for the following function: data or Ethernet connection onboard. They are designed for installations where a reference cable matching the equipment is preferred over an approximate one.

Which equipment is it compatible with?

Compatibility depends on the exact AMPHENOL device reference. Before ordering, verify the connector, pinout, and documentation of the equipment to be connected. Identified cabling: RJ45.

What needs to be checked before installation?

Check the connector type, network category, and the usable length between devices. Also plan the actual cable routing, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

Plan a separate routing path for high-power cables and avoid tight bends. Connectors must not be under tension, and exposed joints should be protected from moisture.

Does the indicated length always suffice?

The indicated length is 10 ft. Measure the actual passage inside the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM part?

An OEM part reduces the risk of pinout errors, connector mismatches, or signal level issues. This is especially critical for AMPHENOL connections, radar, antenna, marine data bus, or NMEA 2000 networks.