Attwood Sahara MK2 1200 24V automatic bilge pump

The Attwood Sahara MK2 1200 24V AFCTN pump delivers a maximum flow rate of 1200 gallons per hour (GPH), equivalent to approximately 4500 litres per hour.

This Attwood Sahara MK2 1200 bilge pump is designed to operate with a 24 V DC power supply.

Yes, the Attwood Sahara MK2 1200 24V AFCTN pump is an automatic bilge pump, designed for autonomous and reliable operation.

The patented X-Air™ technology is a turbine that actively ejects air trapped in the pump and hoses. This feature prevents airlocks, ensuring the pump does not run dry and thus avoiding overheating and failure.

Attwood’s SteadySwitch™ technology reduces unnecessary pump duty cycles. This helps extend pump life and optimize battery power consumption.

The Attwood Sahara MK2 1200 pump has an IP68 protection rating, meaning it is fully protected against dust and can be submerged in water beyond 1 meter without leakage.

Yes, the Attwood Sahara MK2 1200 pump provides 40% improved protection against water ingress and electrolysis compared to the previous Mk1 model, ensuring better durability in marine environments.

The Attwood Sahara MK2 1200 pump series (including model 5513-7) meets or exceeds the following standards and certifications:

NMMACERCMUKCA

Yes, the Attwood Sahara MK2 1200 24V pump (model 5513-7) is supplied with an integrated non-return valve.

The specific model of this pump is the S1200 from the Attwood Sahara MK2 series.

A bilge pump designed for long service life, such as the Sahara MK2, provides increased reliability and reduces replacement frequency. This minimizes maintenance costs and ensures constant protection of your vessel against water accumulation.

Thanks to its patented X-Air™ turbine, the Attwood Sahara MK2 pump is designed to expel trapped air, helping to prevent dry running that could lead to overheating and motor damage.

Yes, the Attwood Sahara MK2 pump is designed for simplified maintenance, even in the confined spaces of bilges, making regular upkeep easier.

The Attwood Sahara MK2 1200 24V pump features barbed outlets of 1" (25mm) and 1-1/8" (28mm), allowing flexibility in connecting the discharge hose.

Yes, the Attwood Sahara MK2 1200 pump is designed to make installation and maintenance easier, even in the confined spaces typical of bilges.

While the exact installation details are in the product manual, it is generally recommended to mount the pump in the lowest part of the bilge and ensure the discharge hose is properly routed to avoid siphons and air pockets. This pump is designed for simplified installation.

The Attwood Sahara MK2 1200 pump is equipped with a patented X-Air™ impeller that actively expels trapped air. For optimal installation, ensure the discharge hose is routed without tight bends or high points where air could accumulate, to maximize the efficiency of this technology.

No, the Attwood Sahara MK2 1200 24V AFCTN pump is specifically designed to operate with 24V DC electrical systems and is not compatible with 12V systems.

The Attwood Sahara MK2 1200 24V pump is suited for vessels requiring constant and reliable bilge water pumping. Its robustness and high flow rate make it suitable for a wide range of recreational or workboats equipped with a 24V electrical system.