PAN 24SP DC12V ANA V A

The BEP PAN 24SP DC12V ANA V A distribution panel is a marine electrical distribution board designed for centralized management of 24 loads on 12V electrical systems. It includes circuit breakers and an analog monitoring system for voltage and amperage.

This panel is specifically designed for marine electrical systems operating on 12V direct current (DC12V).

The BEP PAN 24SP DC12V ANA V A panel can manage up to 24 different loads or circuits, providing individual protection for each.

This panel integrates Airpax magneto-hydraulic circuit breakers with the following ratings:

5 × 5A circuit breakers8 × 10A circuit breakers8 × 15A circuit breakers1 × 20A circuit breaker1 × 25A circuit breaker1 × 30A circuit breaker

Yes, the panel is equipped with a precise analog monitoring system that allows you to monitor the voltage and amperage of your electrical system, providing direct visibility on its condition.

Panel dimensions are 11.6 inches X 13.9 inches X 2.5 inches (width x height x depth).

The panel is made with a powder-coated marine-grade aluminum base plate, designed to withstand demanding marine environments.

Yes, due to its robust construction and components specifically selected for marine use, this panel is designed to withstand demanding marine environments.

Each switch on the panel is accompanied by labels backlit by green LEDs. Additionally, a red LED indicates system activation, providing a clear indication of circuit status.

Yes, the BEP PAN 24SP DC12V ANA V A panel complies with ABYC (American Boat and Yacht Council) standards for safety and performance in marine environments.

The panel has a 12-way negative bus, simplifying wiring and power distribution.

This BEP distribution panel comes with a 5-year warranty on all parts, demonstrating the product's quality and reliability.

Yes, its sleek design, called "Contour Design", makes it easy to integrate seamlessly into modern boat dashboards.

Yes, the labels on each switch are backlit by green LEDs, ensuring good visibility even in low-light conditions.

No, this panel is specifically designed and calibrated for 12V DC electrical systems. Its use with a 24V system is not recommended.

Yes, each circuit is protected by an Airpax magneto-hydraulic circuit breaker, providing reliable protection against overloads and short circuits.

This is a complete power distribution panel, integrating both circuit protection via circuit breakers and analog monitoring, in addition to load switching.

Yes, BEP products are designed in New Zealand to withstand prolonged exposure in the harshest environments.

The panel enhances electrical safety with integrated magnetic-hydraulic circuit breakers for each load, protecting circuits against overcurrent. Its compliance with ABYC standards also ensures a high level of safety.

The panel displays precise analog monitoring information for system voltage (volts) and amperage (amps), enabling direct control of the electrical state.

The BEP PAN 24SP DC12V ANA V A marine electrical distribution panel is designed to manage and protect 24 separate circuits on a 12V DC system. It includes analog monitoring for voltage and amperage, along with a series of magnetic-hydraulic circuit breakers for reliable protection.

This distribution panel is specifically designed for marine electrical systems operating at a nominal voltage of 12V DC.

The BEP PAN 24SP DC12V ANA V A panel can manage up to 24 independent loads or circuits, each protected by a dedicated circuit breaker.

The panel is equipped with Airpax magneto-hydraulic circuit breakers. It includes the following distribution:

5 × 5 A circuit breakers
8 × 10 A circuit breakers
8 × 15 A circuit breakers
1 × 20 A circuit breaker
1 × 25 A circuit breaker
1 × 30 A circuit breaker

Yes, the panel includes precise analog monitoring for voltage and amperage, providing direct and continuous visibility on the state of your electrical system.

The mounting plate for the BEP PAN 24SP DC12V ANA V panel is made of marine-grade powder-coated aluminum, providing excellent resistance to harsh marine environments.

Yes, due to its robust construction and the use of a high-quality marine-grade powder-coated aluminum base plate, this panel is specifically designed to withstand the harsh conditions of marine environments.

Panel dimensions are 11.6 inches wide, 13.9 inches tall, and 2.5 inches deep (approximately 29.46 cm x 35.30 cm x 6.35 cm).

Each switch is supplied with labels backlit by green LEDs for better visibility in the dark, and a red LED indicates system activation when the switch is in the "on" position.

Yes, the panel is equipped with a 12-way negative bus to simplify wiring and common ground distribution to the various circuits.

The "Contour Design" is an aesthetic feature that allows elegant and modern integration of the panel into ship dashboards, enhancing the overall appearance of the installation.

Yes, this panel complies with ABYC (American Boat and Yacht Council) standards for safety and performance, ensuring reliable and secure use in marine applications.

Yes, the panel is designed to simplify installation. Its "Contour Design" allows for easy integration, and features such as the integrated negative bus simplify wiring.

For correct installation, the panel requires a 12V DC electrical system. Ensure the main power supply matches this nominal voltage.

The panel is built with a marine-grade powder-coated aluminum base plate to resist corrosion. It is recommended to mount it in a location protected from direct water spray where possible, although its construction is robust.

Yes, the panel comes with LED-backlit green labels for each switch, allowing clear identification of each circuit's function.

No, the BEP PAN 24SP DC12V ANA V A panel is specifically designed and calibrated to operate with 12V DC electrical systems. It is not compatible with 24V systems.

Although designed specifically for demanding marine environments, this panel could be adapted to other robust 12V DC applications, such as recreational vehicles, provided the technical specifications and circuit protection requirements match.

No, the BEP PAN 24SP DC12V ANA V A panel features analog monitoring for voltage and amperage, as indicated by "ANA V A" in its name. It does not support NMEA 2000 digital connectivity.

The panel is supplied with breakers rated at specific amperages. While breakers are replaceable components, any modification to the amperage ratings must be performed by a qualified professional and must comply with the panel’s specifications and total capacity to ensure system safety.