Module d'interface de pont vers MasterBus

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 16%

CZone

80-911-0072-00

MasterBus Bridge Interface Module

The CZone to MasterBus bridge module (80-911-0072-00) provides the connection between MasterBus and CZone networks for unified control and simplified wiring. Certified to NMEA 2000 and featuring IP65 protection, it enables information sharing and operation of Mastervolt and CZone equipment.

This module ships with a MasterBus cable adapter, a MasterBus terminator, and a manual.

Retail priceBenefit from the professional rate

$340.26 USD

$340.26 USD ~~$407.74 USD~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product use	Interconnect MasterBus and CZone networks for unified communication and control of onboard devices.
Protocole de communication	MasterBus
Wired input	MasterBus connector, NMEA 2000 Micro connector
Wired output	MasterBus connector, NMEA 2000 Micro connector
Connector type	NMEA 2000 Micro Connector (CZone) and MasterBus
Galvanic isolation	Oui
Compatible MasterBus	Yes
Compatible CZone	Oui
Mounting type	Surface mounting with screws
IP rating	IP20
Dimensions (W x H x D)	69 x 69 x 50 mm
Weight	0.145
Alarm Management Features	Bidirectional alarm transfer
Cable Simplification	Reduced footprint and network complexity
Centralized Control Capability	Yes
Code douanier (HS)	8471900000
Compatible device series	MasterBus devices, CZone devices, Mastervolt inverters and chargers
Connectivity bridge type	Communication bridge
Controlled Load Type	Lights, Pumps
Consommation électrique (mA)	60
Support réseau CZone	Yes
Data Rate Kbps	250
Data Translation Type	Bidirectional MasterBus to CZone and CZone to MasterBus
Housing Ip Rating	IP65
Housing material	Fiberglass-reinforced (marine-grade)
Simplicité d'installation	Reduced installation time
Type d'interface	Bridge interface
Nom du fabricant	CZone
Vitesse du réseau MasterBus	250
Support réseau MasterBus	Yes
Material grade	Marine grade
Max Operating Voltage	70
Min Operating Voltage	8
Monitoring Capabilities	Tank levels, power levels, alarms
Network Bridge Function	Communication bridge
Type de topologie réseau	Backbone
NMEA 2000 certified	Yes
NMEA 2000 connector type	Micro-C
Operating Humidity Range Percent	10-90
Poids emballé	0.249
Consommation électrique	720
Power Distribution Support	Yes
Power source	Bus MasterBus (8-70 VDC)
Product type	Interface module
Volume du produit	238.05
Poids net du produit	0.28
SKU du produit	80-911-0072-00
Storage Temperature Range C	-20 to 70
System Integration Benefit	Unified communication and synergistic operation
Wired network	MasterBus
Wiring Reduction Benefit	Simplified wiring and reduced network complexity.

Detailed description

The CZone to MasterBus bridge module (part number 80-911-0072-00) is designed to interconnect MasterBus and CZone networks, enabling unified communication and synergistic operation of onboard systems. This integration allows centralized control and monitoring of equipment from MasterBus or CZone displays, as well as other compatible products.

Unified Integration and Control

This module provides a physical connection between the two networks, making them function as a single coherent system. It enables control of Mastervolt inverters and chargers via CZone displays, switches, or integrated products. Similarly, CZone output devices such as lights and pumps can be controlled via MasterBus displays and switches. The module also facilitates displaying CZone system data (tank levels, power levels) on MasterBus displays, and vice versa, MasterBus data on CZone displays. Alarm transfer between the two systems is also supported.

Technical Specifications and Installation

With dimensions of 69 x 69 x 50 mm and a weight of 0.145 kg, this compact module consumes only 60 mA (720 mW). It features IP65 protection, ensuring resistance to dust and water spray, and uses an NMEA 2000 Micro connector. Integration with the NMEA 2000-certified CZone system allows simplified network architecture with a single backbone for multiple systems. This module replaces complex wiring with a simple data link, reducing installation time and cable clutter. It supports decentralized DC power distribution, positioning circuit control and protection modules closer to loads to optimize cable lengths, cost, and weight. Its LED functions (green for active/OK, flashing orange for traffic, red for fault) provide quick diagnostics of the connection status.

Documentation

Type	Nom
	_tchdat_bep1_pdf.pdf

Expert opinion

Pol CONIN

Digital Manager

« Seamless integration of CZone and MasterBus networks »

The CZone to MasterBus bridge interface module is a key component for hybrid marine installations combining the robustness of Mastervolt power management systems with the flexibility of CZone digital switching. It meets a specific need for interoperability between these two architectures, often found on modern and complex vessels. Its role is to merge data and commands, allowing, for example, visualization of Mastervolt battery status on a CZone display or control of CZone lighting from a MasterBus control panel.

Integrating this module significantly simplifies wiring. Where traditional solutions would require multiple relays and kilometers of control wiring, this bridge enables bidirectional communication via a single NMEA 2000 Micro data cable. This results in reduced weight, installation time, and potential failure points. This module is particularly relevant for new builds or refits where optimizing the integration of electrical and electronic systems is a priority.

It is essential to understand that this module is not a standalone device but an integration component. While physical installation is straightforward thanks to NMEA 2000 connectors, software configuration requires a solid understanding of both CZone and MasterBus networks to ensure correct synchronization of functions and alarms. It is therefore recommended for integrators and users with proven technical skills in these ecosystems. There is no specific boat size limitation; the key factor is the complexity and interdependence of the onboard systems.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

MasterBus Bridge Interface Module

$340.26 USD

$340.26 USD ~~$407.74 USD~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of the CZone to MasterBus bridge interface module?

This module is designed to interconnect the MasterBus and CZone networks. It enables unified communication and synergistic operation of onboard systems, facilitating centralized control and monitoring of equipment from MasterBus or CZone displays, as well as other compatible products.

What are the main features offered by this module?

The module allows:

Control of Mastervolt inverters and chargers via CZone displays, switches, or integrated products.Control of CZone output devices (lights, pumps) via MasterBus displays and switches.Display of CZone system information (tank levels, power levels) on MasterBus displays.Display of MasterBus information on CZone displays.Transfer of alarms between the two systems.

What are the physical dimensions of the interface module?

The module has compact dimensions of 69 x 69 x 50 mm.

What is the weight of this CZone module?

The module weighs 0.145 kg, making it lightweight and easy to integrate in various environments.

What is the electrical consumption of the interface module?

The module has a low electrical consumption of only 60 mA (720 mW), minimizing the impact on the system’s battery.

What is the protection rating (IP) of this module?

The module has an IP65 protection rating, ensuring resistance to dust and water jets, making it suitable for a marine environment.

What type of connector is used for this module?

The module uses an NMEA 2000 Micro connector for integration into the network, ensuring a standardized and reliable connection.

Is the module compatible with NMEA 2000 networks?

Yes, integration with the CZone system, NMEA 2000-certified, enables a simplified network architecture and extended compatibility with other NMEA 2000 devices.

How does this module simplify wiring on board?

This module replaces complex wiring with a simple data link. It enables the creation of a simplified network architecture with a single backbone for multiple systems, reducing installation time and cable clutter.

Can I control Mastervolt devices with this module?

Yes, the module allows control of Mastervolt inverters and chargers via displays, switches, or integrated CZone products, providing centralized power management.

Is it possible to control CZone devices from a MasterBus display?

Yes. CZone output devices, such as lights and pumps, can be controlled via MasterBus displays and switches using this module, providing flexible command options.

Does the module allow displaying CZone tank levels on a MasterBus display?

Yes, the module enables the display of CZone system data, including tank levels and power levels, on MasterBus displays for comprehensive monitoring.

Are alarms transferred between CZone and MasterBus systems?

Yes, alarm transfer between the two systems is fully supported by this interface module, ensuring rapid notification of issues.

Does this module support power distribution?

Yes, the module supports power distribution, contributing to more efficient and centralized electrical management aboard the vessel.

What is the advantage of unified communication between CZone and MasterBus?

The main advantage is centralized control and monitoring of all equipment. This simplifies vessel operation, improves efficiency, and enables faster response to system events.

How does the module physically connect to the networks?

The module provides a direct physical connection between the two networks (CZone and MasterBus) using its NMEA 2000 Micro connector, making them function as a single coherent system.

Does the module require complex configuration after installation?

The module is designed to simplify integration. Although initial configuration is required to set up specific interactions between devices, the network architecture is streamlined, reducing overall implementation complexity.

Is this module suitable for use in a marine environment?

Yes, with its IP65 protection rating, the module is designed to withstand typical marine environment conditions such as dust and water splashes, ensuring its durability.

Can the MasterBus information be displayed on a CZone screen?

Yes, the module allows displaying information from the MasterBus network directly on CZone screens, providing a comprehensive overview of the system from a single interface.