Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 24%

CZone

80-911-0013-00

CZone SI Signal Interface

The CZone SI interface (80-911-0013-00) integrates 6 universal inputs (0-34V DC, 0-1000 Ohms) into the NMEA 2000 network for intelligent automation and monitoring. This IPX5 module is compatible with tank level sensors, switches, and voltage or resistive signals. It is supplied with the main module.

Price excl. import taxesBenefit from the professional rate

$272.00 USD

$272.00 USD ~~$357.00 USD~~

Shipping calculated at checkout.

Prices exclude import taxes. DAP delivery: import taxes are paid on delivery.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product use	The CZone SI signal interface connects the CZone system to external sensors, alarms, and switching devices, enabling intelligent and automated operation of circuits based on input status.
Communication protocol	NMEA 2000
Number of inputs	6.0
Number of outputs	0.0
Wired input	NMEA 2000 connector
Wired output	NMEA 2000 connector
Maximum output current per channel	Not applicable (signal input module only)
Connector type	NMEA 2000 connector
MasterBus compatible	No
CZone compatible	Oui
NMEA 2000 compatible	Oui
Operating voltage range	9-16 V DC
Mounting type	Surface mounting
IP rating	IPX5
Dimensions (W x H x D)	100 x 156 x 42 mm
Weight	0.281
Alarm Trigger Conditions	High water level switch
Analog input resistance range	0-1000
Analog input voltage range	0-34
Analog Input Voltage Range Precise	0-5
Product barcode	80-911-0013-00
Certifications	CE, RCM, NMEA 2000
Compatible device series	All NMEA 2000 devices
Data Transmission Category	Fluid, Temperature, Pressure
Data transmitted	Fluid, temperature and pressure information
Digital Input Voltage Range	0-35
Housing material	Polycarbonate, ABS
Input Configurability	Yes
Input Signal Type	Switches (negative, open circuit, 0-35V DC), tank level sensors (0-5V, 10-180 Ohms, 240-33 Ohms), voltage or resistive signals
Input Terminal Type	Screw terminal block
Installation environment	Mariner
Interface type	Signal interface
Led Status Indication	Yes
MFD compatibility	All NMEA 2000 devices
Operating Temperature Range C	-20°C to +55°C
Over-voltage protection	Yes
Packaged weight kg	0.363
Typical power consumption (mA)	100
Power source	Powered via NMEA 2000 network
Level 0 product category	Merchandise
Product category level 1	NAVICO GROUP
Product category level 2	04 - CZone (40)
Product role	Integration of external sensors and switches
Product range	CZone
Product type	Signal interface module
Product volume (cm³)	655.2
Storage Temperature Range C	-40°F to +185°F
System Automation Functions	Centralized and automated circuit management
Supported tank types	Standard tank level sensors (0-5V, 10-180 Ohms, 240-33 Ohms)
Vendor	CZONE
Wired network	NMEA 2000

Detailed description

The CZone SI signal interface (part number 80-911-0013-00) serves as a central component for integrating external sensors and switches into a CZone digital switching and monitoring system. Designed to extend NMEA 2000 network capabilities, it enables centralized and automated control of circuits based on various input types.

Connectivity and input versatility

This module features 6 configurable inputs, providing flexibility for diverse marine applications. It accepts signals from traditional switches (negative, open circuit, 0-35V DC) for output control, as well as alarm triggers such as a high water level switch. The interface also supports industry-standard tank level sensors (0-5V, 10-180 Ohms, 240-33 Ohms) and general voltage or resistive signals. Specific input ranges are 0 to 1000 Ohms for resistive signals and 0 to 34 V DC for voltage signals. Each input includes a status LED indicator for easy monitoring. This versatility distinguishes it from basic input/output modules that handle only a single signal type, positioning the SI interface as a data aggregation solution for the CZone system.

Integration and technical specifications

The CZone SI signal interface integrates with the NMEA 2000 network, enabling transmission of standardized data such as fluid, temperature, and pressure information to multifunction displays and other compatible devices. Its dimensions are 100 x 156 x 42 mm with a weight of 281g. With IPX5 temporary immersion protection, it is suitable for marine environments. The module complies with EMC standards IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1, and ISO 7637-2, ensuring electromagnetic compatibility and robustness against electrical interference. It ideally complements existing CZone systems, such as Touch 10 displays or combined modules, by serving as a gateway for non-NMEA 2000 sensors.

Documentation

Type	Nom
	_tchdat_bep1_pdf.pdf
	czone_signal_interface_user_installation_manual_v2.pdf

Expert opinion

Pol CONIN

Digital Manager

« The CZone SI interface: the analog-to-digital bridge for your NMEA 2000 network »

The CZone SI signal interface is a strategic component for any CZone installation seeking to integrate analog or passive sensors and switches into a NMEA 2000 environment. Its primary role is to digitize these signals for use by the CZone system, enabling centralized automation and monitoring.

This module is particularly relevant for retrofits or custom installations where existing equipment (tank float switches, bilge pump switches, hatch position sensors, manual navigation lights) must be connected to the digital network. It eliminates the complexity and cumbersome wiring of traditional analog systems by providing a single interface for 6 inputs. Integrating this interface greatly simplifies wiring topology and alarm management.

It is essential to plan the module’s location to optimize sensor cable lengths and ensure the NMEA 2000 network is properly sized to accommodate it. While the IPX5 rating provides good splash protection, it is recommended to install it in a dry compartment or under a deck to maximize its lifespan. This module is a wise choice for integrators looking to offer their clients a unified, intelligent solution for managing onboard equipment, fully leveraging CZone system capabilities.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

CZone SI Signal Interface

$272.00 USD

$272.00 USD ~~$357.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is the CZone SI signal interface?

The CZone SI signal interface (reference 80-911-0013-00) is a central module designed to integrate external sensors and switches into a CZone digital switching and monitoring system. It enables the expansion of the NMEA 2000 network for centralized and automated management of circuits from various inputs.

How many configurable inputs does the CZone SI interface have?

The CZone SI signal interface is equipped with 6 configurable inputs, offering high flexibility for various marine applications.

What types of signals can the CZone SI signal interface accept?

This module is versatile and can accept multiple types of signals:

Traditional switch signals (negative, open circuit, 0-35V DC) for output control.Water level alarms, such as a high water level switch.Standard industry tank level probes (0-5V, 10-180 Ohms, 240-33 Ohms).General voltage or resistive signals.

What are the specific input ranges for resistive and voltage signals?

The specific input ranges of the CZone SI interface are:

0 to 1000 Ohms for resistive signals. 0 to 34 V DC for voltage signals.

Does the CZone SI interface have status indicators for its inputs?

Yes, each entry in the CZone SI signal interface is equipped with an LED status indicator, which facilitates monitoring and diagnostics.

What are the physical dimensions of the CZone SI signal interface?

The dimensions of the CZone SI signal interface are 100 x 156 x 42 mm.

What is the weight of the CZone SI signal interface?

The weight of the CZone SI signal interface is 281 grams (0.281 kg).

What is the water ingress protection rating of the CZone SI interface?

The CZone SI signal interface has temporary immersion protection with an IPX5 waterproof rating.

How does the CZone SI interface connect to the boat's system?

The CZone SI signal interface integrates with the NMEA 2000 network, enabling standardized communication with other compatible devices in the boat's system.

Is the CZone SI signal interface compatible with multifunction displays (MFD)?

Yes, thanks to its integration into the NMEA 2000 network, the CZone SI interface enables the transmission of standardized data to multifunction displays (MFD) and other compatible devices.

Which tank level sensor types are supported by the CZone SI interface?

The CZone SI interface supports standard industry tank level sensors with signal ranges of 0-5V, 10-180 Ohms, and 240-33 Ohms.

Can the CZone SI interface be used to trigger alarms?

Yes, the CZone SI interface can be configured to accept alarm triggers, such as those from a high water level switch, enabling proactive monitoring.

What is the role of the CZone SI signal interface in a larger CZone system?

In a CZone system, the SI interface acts as a data aggregation solution. It collects information from various sensors and switches, then integrates it into the NMEA 2000 network for centralized management and monitoring.

What types of data does the CZone SI interface transmit on the NMEA 2000 network?

The CZone SI interface transmits standardized data such as fluid levels, temperature, and pressure information over the NMEA 2000 network.

Is the installation of the CZone SI signal interface complex?

The CZone SI signal interface is designed for seamless integration into an existing CZone system via the NMEA 2000 network. For optimal installation and configuration of inputs, it is recommended to follow the manufacturer’s detailed instructions or consult a professional.

What is the reference number (SKU) for this product?

The reference number (SKU) for the CZone SI signal interface is 80-911-0013-00.

Is the CZone SI interface designed specifically for a marine environment?

Yes, as a CZone product, this interface is specifically designed for marine applications, as evidenced by its IPX5 protection rating and its ability to integrate with NMEA 2000 networks.