Neoprene impeller 8 blades

This impeller is an essential spare part for marine pumping systems. It is manufactured by Jabsco and carries the manufacturer reference 920-0001-P. It is designed for various applications such as engine cooling and bilge water transfer.

The impeller is made of neoprene. This material is a standard choice for flexible impellers, known for its versatility and good resistance to fresh water, seawater, as well as small amounts of oil or diesel fuel.

This Jabsco impeller has 8 blades, which is a key characteristic for its operation and compatibility with specific pumps.

Outer diameter (Ø B): 65 mmWidth (C): 51 mmShaft diameter (Ø A): 16 mmHub type: 7

The manufacturer reference for this impeller is 920-0001-P. This reference is used to precisely identify the part with Jabsco.

This impeller is designed for marine pumping systems. It is specifically suited for engine cooling, bilge water transfer, and other general uses on boats.

Yes, thanks to its neoprene construction, this impeller is fully compatible with both fresh water and seawater.

Yes, the neoprene used in this impeller is resistant to small amounts of oil or diesel fuel, making it versatile for certain marine applications.

The shaft diameter for this impeller, often denoted as Ø A, is 16 mm. This dimension is critical to ensure a proper fit on the pump shaft.

The width of this impeller, designated by C, is 51 mm. This measurement is critical to ensure the impeller fits correctly inside the pump body.

To verify compatibility, it is essential to compare the manufacturer reference of your current impeller (920-0001-P) and its dimensions (Ø A: 16 mm, Ø B: 65 mm, C: 51 mm, Hub: 7) with those of your pump. You can also consult your pump manual for the recommended impeller reference.

No, this impeller is not compatible with all Jabsco pumps. Each pump is designed for specific impellers. It is imperative to check the manufacturer reference (920-0001-P) and dimensions to ensure compatibility with your Jabsco pump model.

The designation "Hub: 7" refers to the type of impeller drive. This is a Jabsco specification for connecting the impeller to the pump shaft, ensuring a precise fit.

While neoprene is versatile, replacing a nitrile impeller with neoprene depends on the specific application and fluids being pumped. Nitrile is generally used for better resistance to oils and chemicals. If your application involves high concentrations of oil or chemicals, it is preferable to stick with a nitrile impeller if that is the original recommendation. For general water applications, neoprene is often a good substitute.

The SKU (Stock Keeping Unit) for this product is JK1920. This reference is used for inventory management and product identification in our system.

No, the Jabsco impeller part number 920-0001-P is specifically an 8-blade model. It is not available with a different number of blades under the same part number. Other Jabsco impellers exist with a different number of blades, but they will have a different part number.

Yes, it is highly recommended to lubricate the impeller with water, dish soap, or a specific impeller grease before installation. This makes insertion into the pump body easier and helps protect the blades during the first dry start.

The lifespan of a neoprene impeller varies significantly depending on usage conditions (frequency, temperature, presence of abrasives, etc.). It is generally recommended to inspect it at least once a year and replace it every two to three years, or more frequently if use is intensive or in harsh environments.