ROD, STABILIZER kit

The ROD,STABILIZER Lowrance kit (part number 000-15278-001) is an accessory designed to ensure the stability of the Lowrance Ghost electric motor. It helps maintain the motor's position, reducing unwanted movements and optimizing its performance during navigation.

The Lowrance stabilisation kit includes the following components:

A top cap (Top cap)
A 3/4 inch-10 jam nut (Jam nut 3/4"-10)
A stabiliser bar (Stabilizer rod)
A rubber foot (Rubber foot / Foot cap)

The ROD,STABILIZER Lowrance kit weighs 0.34 kg.

The stabilizer bar, along with the other components of the kit, provides effective structural reinforcement for the Lowrance Ghost electric motor. It helps maintain the motor's position and reduces unwanted movements during navigation.

The ROD,STABILIZER kit is an accessory designed to enhance the stability of the Lowrance Ghost electric motor, helping to optimize its operation by reducing movements and providing additional support.

The product reference for the ROD,STABILIZER Lowrance kit is 000-15278-001.

No, the ROD STABILIZER kit is sold separately as an accessory for the Lowrance Ghost electric bow thruster.

Yes, this kit is specifically designed for Lowrance Ghost electric motors.

The ROD STABILIZER kit is specifically compatible with Lowrance Ghost electric motors. This includes models from the Ghost series (47, 52, and 60 inches) and the Ghost X model (47 inches).

No, this kit is specifically designed for Lowrance Ghost electric motors and is not intended for use with motors from other brands.

Yes, the kit is compatible with Lowrance Ghost motors with shaft lengths of 47, 52 or 60 inches for the Ghost series, and 47 inches for the Ghost X.

The kit is specifically mentioned for Lowrance Ghost electric motors (Ghost and Ghost X series). Compatibility with earlier generations is not specified.

The kit integrates with the existing Lowrance Ghost engine system. For full support effectiveness, correct installation and adequate spacing of the stabilizer bar are essential.

The kit consists of an upper cover, a 3/4"-10 locknut, a stabilizer bar, and a rubber foot. These parts must be installed to ensure adequate spacing for effective engine support.

If the engine is difficult to deploy, check the installation and spacing at the stabilizer bar to ensure they are correct and do not obstruct deployment.

Yes, it is recommended to check that the mounting bracket properly supports the engine during transport. If necessary, you will need to adjust and tighten the locknut to maintain the position.

It is recommended to visually inspect the bow/stabilizer bar of the bracket before each use. If damaged, it must be replaced. It is also important to check that it properly supports the engine during transport and to adjust or tighten the locknut if necessary.

To ensure proper installation, verify that the spacing is adequate and that the bar firmly supports the engine. A sign of incorrect installation or insufficient spacing could be an engine that is difficult to deploy.

The stabilization kit is an accessory that integrates with the Lowrance Ghost engine. Its installation is described as requiring "proper installation and adequate spacing" to ensure its effectiveness.

The Lowrance ROD STABILIZER kit (part number 000-15278-001) is specifically designed for Lowrance Ghost bow electric motors. It is a direct accessory for all models in the Ghost series, helping to maintain the motor's position and reduce unwanted movement.

This complete kit weighs 0.34 kg and includes the following components:

A top cover

A 3/4-inch-10 locknut

A stabilizer bar

A rubber foot