Side Tiny 1NM - boat <12m - port (red 112.5°)

This is a side navigation light specifically designed for the port (left) side of the boat. It emits a red light over a 112.5° arc and is part of the Mantagua Tiny range, known for its lightweight and compact design.

This Mantagua Tiny side light has a luminous range exceeding 1 nautical mile (NM), making it compliant with safety requirements for coastal and inland navigation.

This navigation light is suitable for vessels under 12 metres (39 feet).

The Mantagua Tiny side light (port) requires a regulated 12V DC power supply.

The light dimensions are: total height 72 mm (30 mm for the light body and 42 mm for the base) and diameter 40 mm.

Yes, it is fully epoxy-resin encapsulated, providing IP67 waterproofing and enhanced vibration resistance, ensuring reliable operation in the most demanding marine environments.

The operating temperature range of this navigation light is between -20°C and 50°C.

This port side light emits a red light, in accordance with maritime signaling standards.

The light is diffused over a 112.5° arc, which meets the signalling requirements for a port-side navigation light.

The luminous intensity of this light exceeds 1.1 candela, ensuring visibility at 1 nautical mile.

For installation, use hose clamps (for the TINY BALCON version). The cable must be routed through the light base, then the base is secured to the light using the 2 supplied screws. Finally, the light is fixed to the mast with the supplied 4 mm stainless steel screws.

Stainless steel screws (ø 4 mm) are provided for securing the light to the mast, ensuring resistance to marine environments.

You must orient the boat symbol located at the top of the light toward the bow of the boat to ensure correct and regulation-compliant signaling.

A minimum cable cross-section of 0.5 mm² is recommended for power supply wiring to ensure a reliable electrical connection.

For wiring, the blue wire must be connected to the negative terminal (-) and the white wire to the positive terminal (+12V DC).

No, the light assembly on its mount must be done manually; an electric drill is not required for this step.

No, this specific model (ref. 00133) is a port-side navigation light (red 112.5°) and is designed solely for this position. For other positions such as starboard (green) or stern (white), other models from the Mantagua Tiny range are available.