Gen2 - OctoPlex 8" Touchscreen (TSM810C), front and rear mounting hardware

The TSM810C display is used to remotely control field-replaceable AC and DC circuit breakers and to monitor common NMEA 2000 marine devices such as compasses, GPS units, and tank level adapters. It provides a simple, fully configurable interface for accessing system functions, status reports, and alarms.

The TSM810C touchscreen is an 8-inch dedicated display.

The TSM810C display enables centralized control and full monitoring of the vessel's AC (alternating current) and DC (direct current) loads.

Yes, the TSM810C display offers a simple and fully configurable interface, allowing users to customize the display and functions.

The OctoPlex G2-Series system offers several advantages, including a significant reduction in wiring weight and lower installation complexity compared to traditional electrical panels. Its redundant architecture via a CAN bus NMEA 2000® network also ensures increased system reliability and safety by eliminating single points of failure.

Yes, the TSM810C display allows monitoring of common NMEA 2000 marine devices such as compasses, GPS units, and tank level adapters via integration of the OctoPlex G2-Series system in an NMEA 2000® network.

The TSM810C display is the primary interface of the OctoPlex G2-Series system, which includes other components such as:

AC and DC power distribution unitsBattery and AC power monitorsSystem Interface Unit (SIU) monitorsNetwork power suppliesThese components work together via the NMEA 2000® network for comprehensive vessel management.

Yes, the TSM810C display is described as an 8-inch dedicated multifunction display (MFD), serving as the primary interface for the OctoPlex G2-Series system.

Mounting hardware for front and rear is included with the TSM810C display for secure installation.

Yes, it is important to note that OctoPlex products are not ignition-protected devices and must not be installed in areas containing combustible fumes. Periodic inspection of all mounting hardware and connections is also recommended.

The OctoPlex G2-Series system is designed to require less complex installation than traditional electrical panels, thanks to its CAN bus NMEA 2000® network architecture, which reduces wiring weight.

Yes, periodic inspection of all mounting hardware and connections is recommended to ensure the OctoPlex system operates correctly and safely.

Installation of the OctoPlex system, including the TSM810C display, must comply with all applicable industry standards for wire protection and other components, including but not limited to those of the American Boat and Yacht Council (ABYC), the National Electric Code (NEC), and/or the National Fire Protection Association (NFPA).

Yes, the OctoPlex G2-Series system uses a redundant NMEA 2000® CAN bus network, ensuring system reliability and safety.

Yes, the OctoPlex G2-Series system, with the TSM810C display as its interface, is NMEA 2000 certified (Category B). This ensures its compatibility and ability to monitor and control other NMEA 2000 marine devices.

The TSM810C display and OctoPlex G2-Series system are certified to multiple international standards, including:

NMEA 2000 (Category B)CE ApprovedIEC 60533 (Electrical and electronic installations in ships)IEC 60945 (Marine navigation and radiocommunication equipment and systems)Lloyd’s Type Approved

Yes, the OctoPlex G2-Series system is NMEA 2000 certified (Category B), ensuring compliance with NMEA 2000 protocol standards for marine electrical and electronic installations.

Thanks to its NMEA 2000 certification, the TSM810C display, as an interface for the OctoPlex G2-Series system, can integrate and monitor common NMEA 2000 marine devices, making it easier to interact with existing navigation systems and other electronic equipment on board.