Mastervolt EasyCharge 10 A, 2 outputs, UK plug

The Mastervolt EasyCharge 10A charger delivers a maximum charging current of 10 amperes (A) for 12V systems and 5 amperes (A) for 24V systems.

The Mastervolt EasyCharge 10A has two isolated charging outputs. Using Sense-Send technology, it can charge two batteries simultaneously by intelligently distributing the current.

This charger is compatible with 12V lead-acid batteries, including:

Wet cell (flooded) batteriesGel batteriesAGM batteriesSpiral batteriesIt is not suitable for non-rechargeable batteries or other battery technologies.

The Mastervolt EasyCharge 10A is recommended for batteries with a capacity between 35 Ah and 120 Ah.

The Mastervolt EasyCharge 10A has an IP68 protection rating. This means it is fully dust-tight and can be submerged for extended periods without water ingress, making it weatherproof and suitable for demanding marine environments.

The Mastervolt EasyCharge 10A dimensions are 140 x 198 x 63 mm (length x width x depth). Its weight is 2.5 kg (excluding cables).

The Mastervolt EasyCharge 10A charger uses a multi-stage optimized charging process called Mastervolt 3-step+, which includes:

Bulk: Maximum current is delivered for fast charging (0 to 75%).Absorption: The maximum charging voltage is maintained and current decreases until 100% charge is reached.Float: The battery is fully charged; voltage is stabilized at 13.3 V, then the charger shuts off.Equalization: The charger monitors battery state and restarts a full cycle if voltage drops below 12 V or after 14 days.

Yes, the Mastervolt EasyCharge 10A includes multiple protections to ensure safe and reliable use:

Spark protectionShort-circuit protectionReverse polarity protectionOvervoltage protectionCurrent limitingOver-temperature protection

The Sense-Send™ technology allows the Mastervolt EasyCharge 10A charger to intelligently distribute current between its two outputs. The charger analyzes the power required by each battery and allocates more current to the one that needs it most, reducing overall charging times. If the charge levels are equivalent, the charger balances the currents sent to each battery.

The Mastervolt EasyCharge 10A is designed to operate within an ambient temperature range of -20°C to 50°C. Power reduction may occur from 40°C to limit the device's internal temperature.

The Mastervolt EasyCharge 10A charger is compatible with a wide range of AC input voltages, from 90 to 265 V AC, at a frequency of 50/60 Hz. This versatility ensures global compatibility.

Yes, the Mastervolt EasyCharge 10A is compatible with 24V battery systems. It can deliver a maximum charging current of 5 amperes (A) when configured for 24V batteries.

No, this charger is not suitable for lithium batteries. It is specifically designed for 12V lead-acid batteries, including flooded, Gel, AGM, and spiral types.

The Mastervolt EasyCharge 10A model with SKU 43321002 is supplied with a UK plug (BS1363 type G).

When installing the charger, it is critical to follow these precautions:

Read the user manual carefully before any handling. Check the charger and cables for damage; do not use a damaged product. Ensure the AC power is unplugged before starting installation. Disconnect all battery consumers before connecting the charger. The AC connections and safety measures must comply with local regulations and applicable standards. The charger is Class I protection and must be plugged into a socket protected by a residual-current circuit breaker. Provide adequate ventilation in the battery compartment to prevent explosive gas buildup during charging.

To connect the charger to the batteries, follow these steps:

Start with the battery’s non-common terminal. Connect the RED terminal of the charger to the battery’s POSITIVE terminal (+, P, POS). Next, connect the BLACK terminal of the charger to the battery’s NEGATIVE terminal (NEG, N, –). Ensure all connections are tight and secure.

No, it is strictly inadvisable to cut the charger's connection cables. Any modification to the cables may compromise the device's safety and proper operation and could void the warranty.

Mastervolt guarantees the proper functioning of the EasyCharge 10A for a period of two (2) years from the date of purchase, provided it is installed and used in accordance with the instructions in the manual.

The two-year warranty for the Mastervolt EasyCharge 10A is limited to the cost of parts for replacement or repair of the device. Labor and shipping costs are not covered under this warranty.