Convertisseur chargeur Mac Plus 48/24-30 IP23 CZone

Mac Plus 48/24-30 IP23 CZone DC-DC converter-charger

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 18%

Mastervolt

81203305

Mac Plus 48/24-30 IP23 CZone DC-DC converter-charger

The Mastervolt Mac Plus 48/24-30 IP23 CZone is a bidirectional DC-DC converter-charger for 48V/24V systems. It converts and stabilizes voltage with a 30A output current on the 24V side. Compatible with CZone and MasterBus, it is ideal for managing power between battery banks of different voltages. Supplied with battery temperature sensor, CZone cable (1m), and MasterBus terminator.

Retail priceBenefit from the professional rate

$573.47 USD

$573.47 USD ~~$700.58 USD~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

IP rating	IP23
Marine-ready	Oui
Operating temperature range	-20 to +60 °C
Cooling method	Natural convection
Dimensions (W x H x D)	220 x 150 x 80
Mounting type	Wall mounting
Weight	0.0
Wired network	MasterBus, CZone
Wired input	Screw terminal block
Wired output	Screw terminal block
Nominal input voltage	48.0
Input voltage range	36-48 V
Nominal output voltage	24.0
Output frequency	50/60 Hz (if inverter)
Inverter waveform	Pure sine wave (if inverter)
Continuous power at 25°C	720.0
Continuous output power (40°C)	576.0
Peak power	720.0
Max efficiency	92.0
Remote on/off support	Oui
Short-circuit protection	Oui
Overload protection	Oui
Recommended fuse rating	40.0
Code-barres du produit	81203305
Protocole de communication	MasterBus / CZone
Compatible device series	Universal
Topologie du convertisseur	Bidirectional DC-DC converter
Rendement énergétique	90.0
Tension d'isolation galvanique	0.0
Type d'interface	MasterBus / CZone
Marine grade	Oui
Compatible MasterBus	Yes
Nom du modèle	Mac Plus 48/24-30
Courant de sortie	30.0
Max output power	720.0
Tension de sortie	24.0
Output voltage adjustment range	230V (fixed)
Protection contre la surchauffe	Oui
Protection contre les surtensions	Oui
Type de conversion d'énergie	DC-DC
Power source	48 V battery
Product type	Bidirectional DC-DC battery charger converter
SKU du produit	81203305

Detailed description

The Mastervolt Mac Plus 48/24-30 IP23 CZone is a bidirectional DC-DC converter-charger designed for 48V/24V electrical systems with a common negative ground. With a 30A output current on the low-voltage side (24V) and a power output of 720W, it stabilizes power supply for your 24V equipment from a 48V battery bank, or vice versa.

Bidirectional operation and versatility

Unlike a unidirectional DC-DC converter, the Mac Plus can reverse the current flow direction. This allows, for example, charging a 48V service battery via a 24V alternator, or boosting a 24V starter battery from the 48V bank. This function can be controlled via a remote contact, a MasterBus event, or a CZone circuit. The Mac Plus 48/24-30 differs from the 48/12-50 model in its output voltage (24V instead of 12V), and is intended for boats with a 24V network for high-power equipment (motors, thrusters, etc.).

CZone and MasterBus integration

This model is CZone-certified and MasterBus-compatible, enabling deep integration with Mastervolt energy management systems. Via the CZone network, you can configure charge profiles, set alarms, and create automation rules (e.g., load shedding in case of low battery voltage). The Mac Plus comes with a 1-meter Mastervolt-CZone connection cable and a MasterBus terminator.

Installation and protection

With an IP23 protection rating, it resists water spray and dust, making it suitable for installation in a ventilated technical compartment, away from direct spray. The package includes a battery temperature sensor to optimize charging based on temperature. Connections are made via screw terminals for cables up to 10 mm² (low side) and 6 mm² (high side).

Documentation

Type	Nom
	FR - Manuel d'utilisation et d'installation - Convertisseur chargeur Mac Plus 48/24-30 IP23 CZone
	EN - User and Installation Manual - Mac Plus 48/24-30 IP23 CZone Bidirectional DC-DC Charger

Expert opinion

Pol CONIN

Digital Manager

« A reliable bidirectional DC-DC converter for 48V/24V networks »

The Mac Plus 48/24-30 is a bidirectional DC-DC converter specifically designed for 48V systems that need to power 24V equipment (thrusters, windlasses, etc.). Its ability to reverse the charging direction is a significant advantage for redundancy: in case of a 48V bank failure, it can keep the 24V battery operational. CZone integration allows precise energy priority management but requires configuration via the CZone software. The IP23 housing is well-ventilated, but avoid installing it in an environment where moisture could accumulate. For maximum reliability, I recommend using it with external fuses on each branch.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Mac Plus 48/24-30 IP23 CZone DC-DC converter-charger

$573.47 USD

$573.47 USD ~~$700.58 USD~~

Frequently Asked Questions

Need help? Contact us

Can the Mac Plus 48/24-30 operate in both voltage directions?

Yes, the Mac Plus 48/24-30 is a bidirectional converter-charger. It can convert a voltage from 48V to 24V, or reverse the current flow direction to convert from 24V to 48V. This function is controllable via a remote contact, a MasterBus event, or a CZone circuit.

What is the difference between the Mac Plus 48/24-30 and other models in the Mac Plus range?

The 48/24-30 model differs in its operating voltages: it accepts a 48V input and provides a 24V output (or vice versa in bidirectional mode). Other models in the Mac Plus range may have different input/output voltages, such as 48/12V or 12/48V.

What are the main applications of the Mac Plus 48/24-30?

The Mac Plus 48/24-30 is suitable for several applications, including:

Stabilizing 24V equipment power from a 48V battery bank.Charging a 48V service battery via a 24V alternator.Boosting a 24V starter battery from a 48V bank.Used as a three-stage battery charger or as a stabilized DC power supply.

Is the Mac Plus 48/24-30 suitable for marine environments?

Yes, with an IP23 protection rating, the Mac Plus 48/24-30 resists water spray and dust. It is designed to be installed in a ventilated technical compartment, protected from direct spray. It is also compatible with common negative-ground marine installations.

Where should I mount the Mac Plus 48/24-30 converter?

The Mac Plus 48/24-30 must be mounted on a flat, rigid surface using four M5 screws. It requires a minimum clearance of 10 cm (4 inches) on all sides to ensure adequate ventilation. Avoid mounting it directly above batteries that may emit corrosive fumes.

Can I use the Mac Plus 48/24-30 to charge lithium batteries?

Yes, the Mac Plus 48/24-30 can be used to charge lithium batteries. Charging profiles and other battery-specific parameters can be configured via MasterBus or CZone network integration.

Does the Mac Plus 48/24-30 require a specific grounding setup?

Yes, the Mac Plus 48/24-30 is designed to be used only in installations with a common negative ground.

With which types of electrical systems is the Mac Plus 48/24-30 compatible?

The Mac Plus 48/24-30 is compatible with direct current (DC) electrical systems with a nominal voltage of 48V and 24V. It is specifically designed for installations with a common negative ground.

Is the Mac Plus 48/24-30 compatible with the NMEA 2000 network?

Yes, the Mac Plus 48/24-30 is CZone certified. CZone is an implementation of the NMEA 2000 standard, enabling integration and communication with other NMEA 2000-compatible devices via the CZone network.

Can I use the Mac Plus 48/24-30 with different starting and service batteries?

Yes, the bidirectional operation of the Mac Plus 48/24-30 allows managing battery banks of different voltages. For example, it can charge a 48V service battery from a 24V alternator or boost a 24V starting battery from a 48V bank.

Is it possible to connect a battery temperature sensor to the Mac Plus 48/24-30?

Yes, the Mac Plus 48/24-30 comes with a battery temperature sensor and has a dedicated connector (pins 5 and 6 on the accessory connector) for its connection. This allows charge optimization based on battery temperature.

What is the warranty duration for the Mastervolt Mac Plus 48/24-30?

Mastervolt provides a two-year product warranty on the Mac Plus 48/24-30, starting from the purchase date.

What are the conditions for the Mac Plus 48/24-30 warranty to remain valid?

For the Mac Plus 48/24-30 warranty to remain valid, the product must be installed and used strictly in accordance with the instructions detailed in the user manual. Improper installation or use may result in underperformance, damage, or failure of the product, and void the warranty.

Is the Mac Plus 48/24-30 supplied with a user manual?

Yes, a user and installation manual is included with the delivery of the Mac Plus 48/24-30. It contains all important instructions for safe and effective use and maintenance of the device.