DC Low Voltage Distributor MG Distributor LV – MGLVDIST01001

The MG Distributor LV, part number MGLVDIST01001, is a DC distribution box designed by MG Energy Systems. It allows parallel connection of battery modules and integrates fuse protection within a low-voltage electrical system architecture.

The MG Distributor LV is used to create a protected DC positive and negative distribution in parallel battery bank architectures. It is designed for MG Energy low-voltage battery system integrators who require secure and organized power distribution management.

The key strengths of the MG Distributor LV include its ability to manage positive and negative DC distribution for parallel battery architectures, its documented use up to 144 Vdc, and the provision of slots for protection fuses suitable for the system.

The MG Distributor LV is rated for use up to 144 Vdc. It is specifically designed for MG Energy low-voltage systems.

No, the MG Distributor LV housing is supplied alone. EF3 fuses, cables, terminals, and upstream/downstream protection must be provided separately by the installer.

The declared shipping weight for the MG Distributor LV is 4.9 kg.

The approximate dimensions of the MG Distributor LV are about 430 mm in length, 227 mm in width, and 118 mm in height.

The country of origin of the MG Distributor LV is the Netherlands.

No, the MG Distributor LV is not classified as dangerous goods for transport.

The MG Distributor LV is compatible with MG Energy systems up to 144 Vdc. Compatibility is subject to a complete and appropriate system sizing by a professional.

The MG Distributor LV is compatible with the EF3 fuses documented by MG Energy. The rating of these fuses must be selected based on the specific requirements of your installation.

The fuse rating must be calculated precisely based on several factors, including the cables used, the batteries, the battery management system (BMS), and the potential fault current of your system. This analysis must be performed by a qualified professional.

No, the documented use of the MG Distributor LV is strictly limited to systems up to 144 Vdc. It must not be used with voltages exceeding this limit for safety and compliance reasons.

Yes, sizing and wiring of the MG Distributor LV are complex operations that must be performed by a qualified professional to ensure safety, compliance, and proper system operation.

During installation, it is imperative to respect polarity, appropriate cable cross-sections, recommended torque values, and isolation distances. It is also crucial to de-energize the installation and lock out all energy sources before any intervention to prevent any electrical hazard.

For a complete and functional installation, you will need to separately provide EF3 fuses, cables, terminals, upstream/downstream protection. Additionally, an electrical study, assembly, and commissioning by a professional are essential.

Yes, it is absolutely essential to strictly respect the polarity (positive and negative) when wiring the MG Distributor LV. Reversing polarity could cause serious damage to the equipment and pose safety risks.

Yes, cable sections must be properly sized based on the expected currents in the system, cable lengths, and applicable safety standards. Accurate cable sizing is an integral part of the electrical study, which must be performed by a qualified professional.