Piedestal Raymarine D026 38 mm pour pilote de barre franche

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 20%

Raymarine

D026

38 mm pedestal

The RAYMARINE D026 pedestal is an essential mounting accessory designed to support marine electronic equipment with a 38 mm diameter base. It provides a stable and secure solution for positioning your instruments on the deck or console. This pedestal is a generic component of the RAYMARINE accessory range, intended to complement various installations.

Price excl. import taxesBenefit from the professional rate

$95.00 USD

$95.00 USD ~~$119.00 USD~~

Shipping calculated at checkout.

Prices exclude import taxes. DAP delivery: import taxes are paid on delivery.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	On flat surface
Color	Black
Compatible models	Marine instruments compatible with a 38 mm mounting diameter
Finish	Matte finish
Installation type	Screw mounting
Display capacity	1 display
Kit contents	1x Pedestal, mounting hardware
Product type	Instrument mount

Detailed description

The Raymarine D026 is a 38 mm (1.5") pedestal socket for the fixed point of a Raymarine tiller drive autopilot.

Socket pedestal for tiller drive

This part raises the mounting socket height when the anchor point must be taken from the cockpit surface. In Raymarine’s 87279-3-EN manual, it corresponds to a dimension G of 76 mm.

Fixed point for the cylinder

The pedestal allows positioning the cylinder socket at the height specified by Raymarine. The mounting surface must remain rigid to withstand the forces transmitted by the autopilot.

Skysat advice

Check the fixed point height and the rigidity of the mounting surface before drilling. Depending on the cockpit geometry, a tiller elbow or a tiller extension may also be required.

Documentation

Type	Nom
	EN - Raymarine tiller pilot installation manual - Raymarine socket

Expert opinion

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

38 mm pedestal

$95.00 USD

$95.00 USD ~~$119.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is this Raymarine pedestal used for?

The D026 is a 38 mm pedestal socket for the fixed point of a Raymarine tillerpilot cylinder.

When to choose a pedestal instead of direct mounting?

A pedestal is required when the cockpit surface is too low relative to the cylinder axis. It allows positioning the fixed point at the height specified by Raymarine.

Which Raymarine part number corresponds to this reference?

In the Raymarine manual, D026 corresponds to a G dimension of 76 mm and a pedestal length of approximately 38 mm (1.5").

When should a pedestal socket be used?

Use this when the cylinder’s fixed point must be raised from the cockpit surface to match the autopilot’s geometry.

What is the difference compared to a tiller support/elbow?

The pedestal acts as the fixed point of the ram, on the cockpit structure. The elbow bracket acts on the tiller side to compensate for the tiller height.

Which autopilots is it compatible with?

It is used with Raymarine ST1000/ST2000 and Evolution Tiller Drive autopilots when mounting dimensions require it.

Does the mounting surface need to be reinforced?

Yes, it must be rigid and strong enough to withstand the actuator's loads. If in doubt, reinforce the mounting area.

What to check before ordering?

Measure the fixed point height and compare it to the Raymarine chart. Also check whether a tiller extension or tiller support is required as an addition.