50-meter cable and connector for masthead unit

Raymarine A28163 cable has a length of 50 meters. This generous length is designed to suit a wide range of sailboats, allowing full routing from the masthead to the instrumentation.

Yes, the Raymarine A28163 cable comes with the connector specifically designed to establish a reliable connection with the Raymarine masthead unit compatible with the wind transducer/vane anemometer. This simplifies installation and ensures perfect compatibility.

This cable is designed to connect Raymarine wind transducer / vane anemometer masthead units. It ensures wind data transmission (speed and direction) to the onboard navigation instrumentation.

Yes, as a Raymarine product, this cable is specifically designed to withstand marine environment constraints. It is manufactured to withstand exposure to UV rays, salt water, humidity, and temperature variations, ensuring its durability and reliability.

The primary function of this cable is to establish a communication and power link between the wind sensor (vane anemometer) located at the masthead and the Raymarine navigation instrumentation system inside the boat. It transmits essential wind speed and direction data.

Yes, cable A28163 is an original Raymarine product. Using genuine parts ensures compatibility, performance, and reliability with the brand's equipment.

Raymarine marine data cables are typically designed with appropriate shielding to minimize electromagnetic interference (EMI) and ensure stable, reliable data transmission, which is critical for wind data.

This cable is compatible with Raymarine wired wind transducer/vane anemometer masthead units, including those used with i60 Wind, i70S instrument systems (via an iTC-5 converter if required) and earlier generations such as ST60+ or ST70. It is specifically designed for wired wind sensors.

No, this cable is a proprietary Raymarine product, designed with electrical specifications and a connector specific to their mastheads and instrument systems. It is not recommended to use it with equipment from other brands, as this could lead to compatibility or operational issues.

Yes, this cable is compatible with masthead units used by Raymarine i60 Wind systems. For i70s systems, the cable connects to the masthead unit, which typically connects to a Raymarine iTC-5 transducer converter, which is then integrated into the SeaTalkng network.

The connector supplied with cable A28163 is a proprietary Raymarine model. It is specifically designed to fit and operate optimally with the brand’s masthead wind transducer/vane anemometer units, ensuring a secure and watertight connection.

When running the cable through the mast, it is important to:

Use a halyard or a fish tape to ease the passage.
Avoid twisting or pinching the cable.
Protect the cable from sharp edges or abrasion.
Ensure no excessive tension is applied to the cable.
Leave some slack at the ends to facilitate connections and maintenance.

Yes, this Raymarine cable is designed with adequate flexibility to facilitate routing through masts and cable conduits while maintaining the necessary robustness for a marine environment. Its design allows for discreet and secure routing.

Connecting the cable to the masthead with the supplied connector generally does not require complex specific tools. Basic tools such as a screwdriver (if the connector has clamping screws) or a wrench (to tighten a gland) may be needed. It is important to follow Raymarine’s specific instructions for the masthead in question.

This cable is perfectly suited for both scenarios: it is ideal for a new full installation of a Raymarine wind system, as well as for replacing an existing damaged or faulty cable in a compatible Raymarine system.

The cable itself is a component. Detailed instructions or the wiring diagram are usually provided with the wind transducer / vane anemometer masthead unit or the Raymarine instrument system to which it is intended to be connected. Refer to the documentation of these devices for precise connection diagrams.

Yes, connectors for marine electronic systems, including those from Raymarine, generally have specific polarity and insertion direction. The supplied connector is designed to fit correctly in only one orientation to ensure proper signal and power transmission. It is critical not to force the connection and to ensure correct alignment.

Watertightness of the connection is crucial in a marine environment. The connector supplied with the Raymarine A28163 cable is designed to be watertight once properly assembled and tightened. It is important to ensure that the O-rings or sealing rings are in place and undamaged, and to tighten the connector firmly according to the manufacturer’s specifications to prevent water ingress.

Yes, as an original Raymarine product, the A28163 cable is covered by the manufacturer's standard warranty. Please refer to Raymarine's warranty terms and conditions for further details.

The Raymarine A28163 cable is specifically designed for use with Raymarine’s wired masthead wind sensors. It is compatible with the following models:

Short Arm Wind Transducer, Raymarine part number E22078.Long Arm Wind Transducer, Raymarine part number E22079.This 50 m cable connects these wind transducers mounted at the top of the mast to compatible Raymarine navigation instruments aboard, such as i60 Wind displays or i70s multifunction displays, enabling wind speed and direction data transmission.