Coude / support de barre Raymarine D010 51 mm

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 14%

Raymarine

D010

51 mm Elbow

The Raymarine 51 mm elbow is an essential fitting for redirecting conduits or cables of the corresponding diameter. Designed to integrate into the Raymarine ecosystem, it ensures a reliable connection and optimizes onboard layout. This item is a single component with no specific accessories included.

Price excl. import taxesBenefit from the professional rate

$71.00 USD

$71.00 USD ~~$83.00 USD~~

Shipping calculated at checkout.

Prices exclude import taxes. DAP delivery: import taxes are paid on delivery.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Connection
Compatible models	Raymarine equipment and 51 mm compatible systems
Product dimensions	Diameter 51 mm
Installation type	By connection
Kit contents	A 51 mm elbow
Product type	Fitting

Detailed description

The Raymarine D010 is a 51 mm tiller drive arm/elbow for Raymarine tiller drive pilots.

Cylinder height correction

This part compensates for a height difference between the tiller arm and the fixed mounting point of the cylinder, ensuring the pushrod operates along a clean axis. In the Raymarine 87279-3-EN manual, the D010 corresponds to a dimension of 51 mm when the pushrod is below the tiller arm, and 76 mm when the pushrod is above the tiller arm.

Tiller arm mount

The mount is selected to preserve cylinder alignment and prevent stress on the assembly. It must be used with other Raymarine mounting accessories only if cockpit dimensions require it.

Skysat advice

Measure the vertical offset of the assembly before ordering. If the issue involves the fore/aft distance between the cylinder and the tiller pin, choose a D003 to D008 pushrod extension instead.

Documentation

Type	Nom
	EN - Raymarine tiller pilot installation manual - Raymarine 51 mm tiller arm elbow support

Expert opinion

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

51 mm Elbow

$71.00 USD

$71.00 USD ~~$83.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is this Raymarine bracket/elbow used for?

The D010 reference corrects the height between the tiller and the autopilot ram. It helps keep the pushrod in a horizontal axis and free of stress.

When is a bracket/elbow required?

This type of part is required when the tiller is not at the correct height relative to the ram. The reference depends on the measured vertical offset.

Which rating corresponds to this part number?

In the Raymarine manual, D010 corresponds to 51 mm when the pushbutton is below the tiller, and 76 mm when it is above the tiller.

Which autopilots is it compatible with?

This type of mount is used on Raymarine tiller drive autopilot installations, including ST1000/ST2000 and Evolution Tiller Drive models, depending on cockpit geometry.

How to choose between D009, D010, D011, D159 and D160?

Measure the vertical offset between the cylinder axis and the tiller, then select the reference whose dimension matches the Raymarine table.

What is the difference with a D003 to D008 extension rod?

The bracket/elbow adjusts the tiller height. An extension rod adjusts the longitudinal distance between the actuator's fixed point and the tiller.

Should the tiller be drilled?

Installation depends on the boat and the autopilot. Follow the Raymarine manual and verify the measurements before any drilling or permanent mounting.