AC Circuit Breaker Gen 2 - Bipolar 230 VAC, 20 A, Standard Trip

The primary function of this Gen 2 Raymarine AC circuit breaker is to protect AC circuits aboard vessels. It is designed to cut power in the event of overload or short circuit, thereby protecting electrical equipment.

This circuit breaker is a bipolar model, designed to operate at 230 VAC (volts alternating current) with a rating of 20 A (amperes).

This circuit breaker has a medium trip delay. This means it is suitable for applications requiring reactive but not instantaneous tripping, providing a balance between protection and tolerance to normal transient overvoltages.

Yes, this circuit breaker is designed for protecting AC circuits on board vessels. It is tested and certified to maritime standards, ensuring compliance with safety and performance requirements in a marine environment.

Yes, the design of this circuit breaker allows for field replacement, which contributes to simplified maintenance of onboard electrical systems.

This circuit breaker is part of the G2-Series AC power distribution units architecture, such as those in the OctoPlex system. It is designed to integrate with these power distribution platforms.

Yes, integrating this circuit breaker into the G2-Series AC power distribution units architecture, such as the OctoPlex system, enables remote control, on/off activation, and circuit status monitoring functions.

Yes, this circuit breaker is part of a tested and certified NMEA 2000® Approved (Category B) product ecosystem, ensuring compatibility with this marine network protocol.

Yes, this circuit breaker is designed to integrate into a system like OctoPlex, enabling centralized management of the vessel's electrical power, including remote monitoring and control of AC circuits.

No, this circuit breaker is specifically a 230 VAC 20 A bipolar model. It is designed for European 230 VAC applications, not for 110 V systems or three-phase systems.

Yes, this circuit breaker is part of an ecosystem designed to reduce wiring and installation complexity for onboard electrical systems, particularly through integration with the OctoPlex system.

OctoPlex products, including this circuit breaker, are not ignition-protected devices and must not be installed in areas containing combustible vapors.

It is recommended to periodically check all mounting hardware and connections. The installation must comply with applicable industry standards, such as those from ABYC (American Boat and Yacht Council), NEC (National Electric Code) and/or NFPA (National Fire Protection Association).

Yes, the OctoPlex system offers a significant reduction in wiring weight and reduced installation complexity thanks to its NMEA 2000 network-based architecture.

Yes, periodic inspection of all mounting hardware and connections is recommended for OctoPlex products to ensure proper operation and system safety.

Yes, this circuit breaker is NMEA 2000® Approved, certified Category B, ensuring its interoperability and compliance with the NMEA 2000 network.

Yes, it is certified IEC60533 for electrical and electronic installations in ships and IEC60945 for maritime navigation and radiocommunication equipment and systems, ensuring compliance with required safety standards in marine environments.

Yes, failure to comply with applicable industry standards, such as those from ABYC, NEC, and/or NFPA, during the installation of the OctoPlex system or its components may limit the warranties provided by Teledyne FLIR, the manufacturer of the OctoPlex system.

Although this circuit breaker is branded Raymarine, it is designed to integrate with the OctoPlex system. The OctoPlex system is a registered trademark of Teledyne Technologies, and technical documentation indicates Maretron (part of Teledyne FLIR Maritime US Inc.) as the OctoPlex system supplier.

The Raymarine CA Gen 2 circuit breaker is designed to protect AC circuits aboard vessels. It is a double-pole breaker capable of handling 230 VAC at 20 A with a medium trip delay.

This circuit breaker is specifically designed to integrate into the G2 series AC power distribution units, including within the OctoPlex system. This integration provides reliable circuit protection along with advanced features such as remote control (on/off) and circuit status monitoring.

Its modular design allows for easy field replacement. It is also tested and certified to multiple maritime standards, including:

CE ApprovedIEC60533 (Electrical and electronic installations in ships)IEC60945 (Marine navigation and radiocommunication equipment and systems)NMEA 2000® Approved (Category B)Lloyd’s Type Approved (Test Specification #1, ENV2 Certificate No. 10/00021)