AC Circuit Breaker Gen 2 - Single Pole 230 VAC, 30 A, Long Time Delay

A single-pole AC circuit breaker is an electrical protection device designed to interrupt the current on a single conductor (the phase) of an alternating current (AC) circuit in case of overload or short circuit. It protects equipment and installations from electrical damage.

This Raymarine circuit breaker is designed to operate with a rated voltage of 230 VAC (volts alternating current).

The rated current of this circuit breaker is 30 amperes (A). This means it is designed to handle a continuous current up to 30 A before tripping in the event of an overload.

The "long delay trip" indicates that this circuit breaker is designed to tolerate transient currents or high inrush currents for a short period without tripping immediately. This feature is particularly useful for loads with high starting current, such as certain motors or equipment, preventing nuisance tripping.

The Raymarine Gen 2 circuit breaker is designed to provide essential protection for alternating current (AC) circuits in marine electrical management systems. It protects equipment against overloads and short circuits, ensuring the safety and reliability of the vessel's electrical installation.

Yes, this circuit breaker is specifically designed for marine environments. It is part of the OctoPlex G2-Series system, which complies with several international maritime standards, including CE Approved, IEC60533, IEC60945, NMEA 2000 Approved (Category B), and Lloyd’s Type Approved. These certifications ensure its reliability and performance in marine conditions.

The main functions of this circuit breaker include protection of AC circuits, remote activation and deactivation of connected loads, and monitoring of their status. It is designed to integrate into advanced electrical management systems such as the OctoPlex G2-Series.

In the OctoPlex G2-Series power distribution system, this circuit breaker provides AC circuit protection. It also enables remote activation and deactivation of loads, as well as monitoring of their status, all via the NMEA 2000 network. This contributes to centralized and simplified electrical management.

This circuit breaker is designed for specific integration and is an integral part of the OctoPlex G2-Series power distribution system. It is NMEA 2000 certified.

The circuit breaker itself is a component of the OctoPlex G2-Series system, which is NMEA 2000 Approved (Category B). This certification ensures its reliable integration and communication within an NMEA 2000 network.

Yes, this circuit breaker allows remote activation and deactivation of loads. This feature is made possible by its integration into the OctoPlex G2-Series system and the NMEA 2000 network.

Yes, the OctoPlex G2-Series system, being NMEA 2000-certified, allows monitoring and control of other common marine devices compatible with NMEA 2000, such as compasses, GPS, tank level adapters, and others.

No, it is important to note that OctoPlex products, including this circuit breaker, are not ignition-protected devices. They must therefore not be installed in areas where combustible vapors may be present to ensure safety.

No, integrating this circuit breaker into the NMEA 2000 network via the OctoPlex G2-Series system reduces wiring complexity and installation effort compared to traditional electrical systems.

When installing this circuit breaker and OctoPlex system components, it is mandatory to comply with all applicable industrial standards for wiring and protection. This includes, but is not limited to, those from the American Boat and Yacht Council (ABYC), the National Electrical Code (NEC), and the National Fire Protection Association (NFPA).

Yes, periodic inspection of all mounting hardware and all connections is recommended to ensure proper operation and system safety.

Yes, the OctoPlex G2-Series system, of which this circuit breaker is part, complies with several international maritime standards. It is CE Approved, meets IEC60533 (electrical and electronic installations on ships) and IEC60945 (maritime navigation and radiocommunication equipment and systems) standards. Additionally, it is NMEA 2000 Approved (Category B) certified and holds Lloyd’s Type Approval.

The OctoPlex G2-Series system is a registered trademark of Teledyne Technologies. The technical documents provided are from Maretron, which is part of Teledyne FLIR. This circuit breaker is offered by Raymarine for integration into this system.

Yes, in addition to circuit protection and remote activation/deactivation, this circuit breaker, integrated into the OctoPlex G2-Series system, also enables monitoring of the status of the loads it protects.

IEC 60533 certifications apply to electrical and electronic installations on ships, ensuring the system meets safety and performance requirements for these applications. IEC 60945 certification applies to maritime navigation and radio communication equipment and systems, ensuring their robustness and reliability in the marine environment.