Disjoncteur CA Gen2 - Unipolaire 230 VCA, 30 A, délai de déclenchement moyen

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Raymarine

CW1B424630110DJ

AC Circuit Breaker Gen2 - Single-pole 230 VAC, 30 A, standard trip

Disjoncteur CA Raymarine Gen 2 unipolaire, 230 VCA, 30 A, avec délai de déclenchement moyen. À utiliser comme composant de protection dans une installation électrique marine compatible, après vérification du calibre, du câblage et du système hôte.

Retail priceBenefit from the professional rate

$54.00 USD

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Breaker Type	Unipolaire
Amperage	30.0
Max Voltage	230 VCA
Poles	1.0
Mounting type	Montage sur panneau
Reset Type	Manuel et à distance
Certifications	CE,IEC 60533,IEC 60945,NMEA 2000,Lloyd's Type Approved
Product type	Disjoncteur

Detailed description

Single-pole 230 VAC, 30 A AC circuit breaker for marine protection

The CW1B424630110DJ is a Raymarine Gen 2 AC circuit breaker designed to protect an alternating current circuit aboard. Its function is to open the circuit in case of overload or short circuit, within an installation sized with the correct cable cross-section and appropriate protections.

Rating and use

This model is configured as single-pole, with a nominal voltage of 230 VAC, a nominal current of 30 A, and a standard trip. It must be selected based on the protected load, circuit type, and applicable marine electrical installation rules.

To verify before installation

This circuit breaker must not be presented as a standalone control module. Any supervision or control functions depend on the panel or distribution system in which it is installed, not the breaker alone. Installation and replacement must be performed with the power off by a qualified person, following the host system documentation.

Documentation

Type	Nom
	EN - Notice d'installation - Disjoncteur CA Gen2 - Unipolaire 230 VCA, 30 A, délai de déclenchement moyen
	EN - Brochure technique - Disjoncteur CA Gen2 - Unipolaire 230 VCA, 30 A, délai de déclenchement moyen
	EN - Brochure technique - Disjoncteur CA Gen2 - Unipolaire 230 VCA, 30 A, délai de déclenchement moyen

Expert opinion

« Electrical protection to be sized with rigor »

This reference must be treated as an electrical protection component, not as a complete digital switching system. The critical point is sizing: 30 A, 230 V AC, single-pole configuration, and average trip delay. For Skysat, the datasheet must remain deliberately concise: verify mechanical and electrical compatibility with the installed panel, then have installation carried out by a qualified professional.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

AC Circuit Breaker Gen2 - Single-pole 230 VAC, 30 A, standard trip

$54.00 USD

Frequently Asked Questions

Need help? Contact us

What is this circuit breaker used for?

It is used to protect an AC circuit from overloads and short circuits. It must be installed in a compatible electrical panel or system.

What are its main features?

This model is unipolar, rated for 230 VAC, with a 30 A rating and a medium trip delay.

What does the number of poles configuration mean?

The unipolar configuration indicates the number of conductors cut simultaneously. It must match the type of circuit to be protected.

Is this an autonomous autopilot module?

No. This reference must be considered as a protection component. Any steering or monitoring functions depend on the distribution system in which it is installed and must be validated with the host system documentation.

Can I replace this circuit breaker with a different rating?

Not without recalculating the circuit. The fuse rating must match the load, cable cross-section, and applicable electrical protection regulations.

Who should perform the installation?

Installation or replacement must be performed with the power off by a qualified installer or electrician, in accordance with the manufacturer's documentation and marine electrical regulations.