Disjoncteur CA Gen 2 - Tripolaire 415 VCA, 10 A, délai de déclenchement moyen

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Raymarine

CW3B424610110JU

AC Circuit Breaker Gen 2 - 3-pole 415 VAC, 10 A, standard trip curve

Disjoncteur CA Raymarine Gen 2 tripolaire, 415 VCA, 10 A, avec délai de déclenchement moyen. À utiliser comme composant de protection dans une installation électrique marine compatible, après vérification du calibre, du câblage et du système hôte.

Retail priceBenefit from the professional rate

$160.00 USD

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Breaker Type	Tripolaire
Amperage	10.0
Max Voltage	415 VCA
Poles	3.0
Mounting type	Encastré
Reset Type	Manuel
Certifications	CE,IEC 60533,IEC 60945,NMEA 2000,Lloyd's Type Approved
Product type	Disjoncteur de circuit alternatif

Detailed description

3-pole 415 VAC AC circuit breaker, 10 A for marine circuit protection

The reference CW3B424610110JU is a Raymarine Gen 2 AC circuit breaker designed to protect an alternating current circuit on board. Its function is to disconnect the circuit in case of overload or short circuit, provided the installation uses the correct cable cross-section and appropriate protection devices.

Rating and application

This model is configured as 3-pole, with a rated voltage of 415 VAC, a rated current of 10 A and a standard trip curve. It must be selected based on the protected load, circuit type and applicable marine electrical installation regulations.

To check before installation

This circuit breaker must not be presented as a standalone control module. Any monitoring or control functions depend on the switchboard or distribution system in which it is installed, not on the circuit breaker itself. Installation and replacement must be performed with the system powered off by a qualified person, following the host system documentation.

Documentation

Type	Nom
	EN - Notice d'installation - Disjoncteur CA Gen 2 - Tripolaire 415 VCA, 10 A, délai de déclenchement moyen
	EN - Brochure technique - Disjoncteur CA Gen 2 - Tripolaire 415 VCA, 10 A, délai de déclenchement moyen
	EN - Brochure technique - Disjoncteur CA Gen 2 - Tripolaire 415 VCA, 10 A, délai de déclenchement moyen

Expert opinion

« Electrical protection to be sized with rigor »

This reference must be treated as an electrical protection component, not as a complete digital switching system. The critical point is the sizing: 10 A, 415 V AC, three-pole configuration and average tripping delay. For Skysat, the datasheet must remain intentionally concise: verify mechanical and electrical compatibility with the installed panel, then have installation carried out by a qualified professional.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

AC Circuit Breaker Gen 2 - 3-pole 415 VAC, 10 A, standard trip curve

$160.00 USD

Frequently Asked Questions

Need help? Contact us

What is this circuit breaker used for?

It protects an AC circuit from overloads and short circuits. It must be installed in a compatible electrical panel or system.

What are its main features?

This model is tripolar, designed for 415 VAC, with a 10 A rating and a medium trip delay.

What does the number of poles configuration mean?

The tripolar configuration indicates the number of conductors cut simultaneously. It must match the type of circuit being protected.

Is this an autonomous autopilot module?

No. This reference must be treated as a protection component. Any autopilot or monitoring functions depend on the distribution system in which it is installed and must be validated against the host system documentation.

Can I replace this circuit breaker with a different rating?

Not without recalculating the circuit. The fuse rating must match the load, cable cross-section, and applicable electrical protection regulations.

Who should perform the installation?

Installation or replacement must be performed with the power off by a qualified installer or electrician, in compliance with the manufacturer’s documentation and marine electrical regulations.