Disjoncteur 2 CA - Tripolaire 415 VCA, 80 A, délai de déclenchement moyen

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Raymarine

CW3B424680110JU

2-pole AC circuit breaker - 3-pole 415 VAC, 80 A, standard trip

Disjoncteur CA Raymarine Gen 2 tripolaire, 415 VCA, 80 A, avec délai de déclenchement moyen. À utiliser comme composant de protection dans une installation électrique marine compatible, après vérification du calibre, du câblage et du système hôte.

Retail priceBenefit from the professional rate

$160.00 USD

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Breaker Type	Tripolaire
Amperage	80.0
Max Voltage	415 VCA
Poles	3.0
Reset Type	Réinitialisation manuelle
Certifications	CE,IEC 60533,IEC 60945,NMEA 2000,Lloyd's Type Approved
Product type	Disjoncteur

Detailed description

3-pole 415 VAC AC circuit breaker, 80 A for marine circuit protection

The reference CW3B424680110JU is a Raymarine Gen 2 AC circuit breaker designed for protecting an alternating current circuit aboard. Its function is to disconnect the circuit in case of overload or short circuit, within an installation sized with the correct cable cross-section and appropriate protections.

Rating and use

This model is configured as 3-pole, with a nominal voltage of 415 VAC, a nominal current of 80 A, and a standard trip delay. It must be selected based on the protected load, the type of circuit, and applicable marine electrical installation regulations.

To check before installation

This circuit breaker must not be presented as a standalone control module. Any supervision or control functions depend on the panel or distribution system in which it is installed, not the circuit breaker itself. Installation and replacement must be performed with the power off by a qualified person, following the host system documentation.

Documentation

Type	Nom
	EN - Notice d'installation - Disjoncteur 2 CA - Tripolaire 415 VCA, 80 A, délai de déclenchement moyen
	EN - Brochure technique - Disjoncteur 2 CA - Tripolaire 415 VCA, 80 A, délai de déclenchement moyen
	EN - Brochure technique - Disjoncteur 2 CA - Tripolaire 415 VCA, 80 A, délai de déclenchement moyen

Expert opinion

« Electrical protection to be sized with rigor »

This reference must be treated as an electrical protection component, not as a complete digital switching system. The critical point is the sizing: 80 A, 415 V AC, three-pole configuration, and average tripping delay. For Skysat, the datasheet must remain intentionally concise: verify mechanical and electrical compatibility with the installed panel, then have installation carried out by a qualified professional.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

2-pole AC circuit breaker - 3-pole 415 VAC, 80 A, standard trip

$160.00 USD

Frequently Asked Questions

Need help? Contact us

What is this circuit breaker used for?

It is used to protect an AC circuit from overloads and short circuits. It must be installed in a compatible electrical panel or system.

What are its main features?

This model is three-pole, rated for 415 V AC, with an 80 A rating and an average trip delay.

What does the pole count configuration mean?

The tripolar configuration indicates the number of conductors cut simultaneously. It must match the type of circuit to be protected.

Is this an autonomous autopilot module?

No. This reference should be treated as a protective component. Any autopilot or monitoring functions depend on the distribution system in which it is installed and must be validated against the host system documentation.

Can I replace this circuit breaker with a different rating?

No, without recalculating the circuit. The fuse rating must match the load, cable cross-section, and applicable electrical protection rules.

Who should perform the installation?

Installation or replacement must be performed with the power off by a qualified installer or marine electrician, in accordance with the manufacturer's documentation and marine electrical regulations.