Evolution EV-2 Wiring Kit
In stock
Technical specifications
Technical specifications
| Type d'interface | NMEA 2000 / SeaTalk NG |
| Sortie réseau | NMEA 2000 / SeaTalk NG |
| Alimentation des capteurs | 12 V DC |
| Cable application | Connecting the Evolution EV-2 autopilot sensor |
| Cable length | 1.0 |
| Cable type | SeaTalk NG splitter cable |
| Certifications | CE, NMEA 2000 |
| Color | Black |
| Compatible network | SeaTalk NG, NMEA 2000, DeviceNet |
| Compatible with | Raymarine Evolution EV-2 autopilot sensor (E70097) |
| Number of conductors | 5.0 |
| Conductor material | Tinned copper |
| Connector type | 1x SeaTalk NG male, 1x EV-2 specific connector |
| Current type | DC |
| EMC compliance | Yes |
| Outer diameter | 7.0 |
| Flexibility | Standard |
| Installation location | Connecting the EV-2 autopilot sensor to the data network |
| IP rating | IPX6 |
| Jacket material | PVC |
| Kit contents | 1x SeaTalk NG to DeviceNet adapter cable (female), Documentation |
| Max voltage | 30.0 |
| Min bend radius | 50 |
| Nominal current | 4.0 |
| Operating temperature | -25 to +55 |
| Operating voltage | 12 V |
| Part type | Wiring kit |
| Max power consumption | 0.36 W |
| Typical power consumption | 0.36 W |
| Pre-molded connectors | Yes |
| Section (AWG) | 18.0 |
| Section (mm²) | 0.82 |
| Shielding | Shielded |
| Shielding type | Sheet and braid |
| Signal integrity protection | Yes |
| Steering system compatibility | Electronic steering systems (Drive-By-Wire, DBW) |
| Storage temperature | -30 to +70 |
| UV resistance | Yes |
| Wired network | NMEA 2000, SeaTalkng |
| Conductor finish | Tinned |
Detailed description
Detailed description
The Raymarine Evolution EV-2 wiring kit (part number R70192) is designed for Evolution EV-2 autopilot installations. It provides clean wiring to connect the EV-2 system to the Raymarine SeaTalk NG / NMEA2000 network, particularly in electronic steering or Drive-By-Wire configurations.
For clean and reliable EV-2 installation
This kit is intended for refits and new installations where original or EV-2-specific wiring is required. It simplifies integration of the autopilot system into a coherent network, with connections designed for marine environments. Before installation, verify the Raymarine installation diagram for the specific autopilot to confirm the kit’s position in the backbone and required connections aboard.
System compatibility
The R70192 does not replace the EV-2 sensor, control head, or drive unit: it is a wiring accessory to complete the installation. It is useful when upgrading an Evolution EV-2 autopilot, replacing a missing harness, or securing a SeaTalk NG / NMEA2000 integration with compatible Raymarine components.
Documentation
Documentation
Expert opinion
Expert opinion
Pol CONIN
Digital Manager
« Raymarine Evolution EV-2 Wiring: Essential NMEA2000 Integration »
Your payment information and data are processed securely.
