i70s Smart Wind System Pack with i70s, RSW Smart Wind, DST810, 5-way, SeaTalk NG backbone cable 3 meters, power, T-piece & 2 terminators

The T70607 pack is a complete instrumentation solution. It includes:

The i70s instrument displayA RSW Smart Wind wind sensorA DST810 sensor for depth, speed, and water temperatureA 5-way SeaTalk NG connectorA 3-metre SeaTalk NG backbone cableA SeaTalk NG power cableA SeaTalk NG T-pieceTwo SeaTalk NG terminators

The i70s display is designed to show a wide range of navigation data. It can display wind data (apparent and true), depth, boat speed, and water temperature using connected sensors. It can also display battery, boat, distance, engine, fuel, environment, GPS, heading, navigation, autopilot, and weather data.

The i70s display is a dedicated instrument display known for its versatility and SeaTalk NG connectivity. Its main features include:

Display of a wide range of data thanks to its multiple data sources (MDS)Customizable display pagesPrecise calibration of wind, depth, speed, rudder, and compass sensorsNative SeaTalk NG connectivity, NMEA 2000 compatible

Yes, the i70s Smart Wind system is fully compatible with NMEA 2000. Its SeaTalk NG connectivity is designed to be compatible with this standard, enabling seamless integration with other marine equipment using the NMEA 2000 protocol.

Yes, it is possible to connect the i70s display to SeaTalk 1 instruments. However, to establish this connection, a SeaTalk 1 to SeaTalk NG converter is required. This converter is not included in the T70607 pack.

SeaTalk NG is Raymarine’s proprietary marine network protocol, NMEA 2000-compatible, that enables communication between onboard instruments. In this pack, the SeaTalk NG network is configured with the following components:

A 5-way connector to centralize connectionsA 3-meter backbone cable for the main network structureA power cable to supply the required powerA T-piece for additional connectionsTwo terminators to properly terminate the network

To install the i70s display, you will need basic mounting tools. This typically includes a drill, drill bits, screwdrivers, and measuring tools to prepare the mounting location and secure the unit. The installation manual provides specific details on recommended tools.

The SeaTalk NG network is powered by 12 Volts DC only. The T70607 pack includes a dedicated SeaTalk NG power cable for this connection. It is imperative that the product is properly grounded before connecting to the power supply.

Yes, an inline fuse is required to power the SeaTalk NG system to protect the equipment. The installation manual specifies the exact ratings for the inline fuse and thermal circuit breaker needed for adequate protection.

When installing the i70s display, it is critical to maintain a safe distance from the vessel's compass. This measure is essential to prevent any magnetic interference that could affect compass accuracy. The exact safe distance is detailed in the product installation manual.

For optimal SeaTalk NG wiring, follow these guidelines:

Use cables of the appropriate type and length.Plan the cable routing to respect the minimum bend radius.Ensure strain relief to prevent cable or connector damage.Maintain proper cable shielding to minimize electromagnetic interference.

Yes, the i70s display offers extensive flexibility for customizing display pages. You can edit existing pages, add new pages, delete those no longer needed, and even change the order of pages. Features such as automatic page scrolling (Page Rollover) and page locking (Page Lock) are also available.

The brightness of the i70s display can be adjusted directly using the device's controls. Additionally, if the system is configured within a network, it can support a Shared Brightness function for centralized management.

The DST810 sensor is an intelligent multifunction sensor. It is designed to simultaneously measure and provide three essential data types: depth under the hull, boat speed through the water, and water temperature. This information is then transmitted and displayed on the i70s display.

The RSW Smart Wind sensor is a key component of the system, specifically designed for wind measurement. It provides accurate data on apparent wind and true wind, which are then displayed on the i70s display to assist with navigation and decision-making at sea.

Yes, the i70s display allows calibration of multiple sensors to ensure data accuracy. You can calibrate depth, speed, wind (including alignment and apparent wind speed adjustment), rudder reference, and compass.

To benefit from an extended warranty for your Raymarine product, it is strongly recommended to register it. Warranty registration can be completed directly on Raymarine's official website.

Before connecting the power supply to this product, it must be properly grounded. This grounding must be carried out in strict compliance with the instructions provided in the installation manual. Furthermore, it is crucial never to connect this unit to a system that uses a positive ground.

Yes, the i70s display can show data from an AIS system if a compatible AIS receiver is connected to the network. You can view AIS targets, adjust the display range, and enable or disable AIS silent mode via the screen.

Yes, the i70s display can support a fuel manager function. This feature allows detection of fuel-related messages and configuration of the manager to monitor fuel consumption and levels on the vessel.