Pack sonde traversante plastique bâbord et tribord 12° RV-312 RealVision 3D, branchement direct AXIOM (2 x câble 2m, câble Y et rallonge 8 mètres)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 8%

Raymarine

T70320

Bow and starboard through-hull plastic transducer pack 12° RV-312 RealVision 3D, direct connection to AXIOM (2 x 2m cables, Y-cable and 8m extension)

The Raymarine RV-312 RealVision 3D plastic through-hull sonar pack is designed for hulls with a deadrise angle of 8 to 15 degrees, providing detailed underwater imaging via RealVision 3D technology. It connects directly to Axiom multifunction displays, simplifying system installation. The pack includes two 12° port/starboard transducers, two 2m cables, a Y-cable, and an 8m extension.

Retail priceBenefit from the professional rate

$2,090.92 USD

$2,090.92 USD ~~$2,275.40 USD~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	RealVision 3D, DownVision, SideVision, high-frequency CHIRP
Operating voltage	12
Fishfinder frequencies	200, 350, 1200
Operating temperature	-25 to 55
Max depth reading	91.0
Transducer material	Plastic
Sonar connector type	Raymarine RealVision 3D (25-pin)
Cable length	10.0
Product width	60
Integrated temperature sensor	Yes
Product height	100
Compatible displays	Raymarine Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom 2 XL, Axiom XL
Product depth	100
IP rating	IPX8
Compass safe distance	100
Mounting type	Through-hull
Certifications	CE, FCC, RCM
Temperature measurement range	-10 to 40
Beam coverage angle	180°
CHIRP high frequency	350, 1200
Fishing type	Sea, Lake
Integrated speed sensor	No
Release year	2023.0
User level	Intermediate

Detailed description

Designed for direct integration with Raymarine Axiom multifunction displays, the bow and starboard through-hull plastic transducer pack 12° RV-312 RealVision 3D provides a complete solution for advanced underwater imaging. This system is specifically suited to hulls with a deadrise angle of 8 to 15 degrees, thanks to its 12° tilted transducers.

RealVision 3D technology for detailed imaging

The RV-312 integrates Raymarine’s RealVision 3D technology, combining DownVision, SideVision, and high-frequency CHIRP functions for a three-dimensional view of the underwater world. Unlike traditional transducers that provide a 2D view, RealVision 3D enables users to explore structures, fish schools, and seafloor relief with unprecedented clarity and perspective. This enhanced imaging capability is critical for fish detection and navigation in complex areas, offering an advantage over classic 2D transducers such as the CPT-100 or CPT-200. The RV-312 represents an evolution of traditional CHIRP transducers, approaching the performance of the RV-200 transom-mounted models but with a through-hull installation.

Installation and system compatibility

This pack includes two through-hull plastic transducers (port and starboard) with a 12° angle, two 2-meter cables, a Y-cable, and an 8-meter extension, enabling direct connection to Axiom displays. The direct connection simplifies installation compared to systems requiring an external sounder module. The RV-312 is optimized for Raymarine’s LightHouse 4 software, ensuring seamless compatibility and integration with the latest features of Axiom, Axiom+, and Axiom Pro displays. AHRS (Attitude and Heading Reference System) calibration is also supported for automatic correction of the boat’s trim, ensuring a stable and precise RealVision 3D image even in rough seas.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Pack sonde traversante plastique bâbord et tribord 12° RV-312 RealVision 3D, branchement direct AXIOM (2 x câble 2m, câble Y et rallonge 8 mètres)
	EN - Plan technique - Pack sonde traversante plastique bâbord et tribord 12° RV-312 RealVision 3D, branchement direct AXIOM (2 x câble 2m, câble Y et rallonge 8 mètres)
	EN - Plan technique - Pack sonde traversante plastique bâbord et tribord 12° RV-312 RealVision 3D, branchement direct AXIOM (2 x câble 2m, câble Y et rallonge 8 mètres)
	EN - Technical drawing - Port and starboard plastic thru-hull transducer pack 12° RV-312 RealVision 3D, direct connection to AXIOM (2 x 2m cables, Y-cable and 8m extension)
	EN - Technical drawing - Pack through-hull plastic transducer port and starboard 12° RV-312 RealVision 3D, direct connection AXIOM (2 x 2m cables, Y-cable and 8m extension)
	EN - Technical drawing - Dual plastic through-hull transducer pack 12° RV-312 RealVision 3D, direct connection AXIOM (2 x 2m cables, Y-cable and 8m extension)
	EN - Technical Drawing - Dual Plastic Through-Hull Sonar Pack Port and Starboard 12° RV-312 RealVision 3D, Direct Axiom Connection (2 x 2m Cables, Y-Cable and 8m Extension)
	EN - Technical drawing - Starboard and port through-hull plastic transducer pack 12° RV-312 RealVision 3D, direct connection to AXIOM (2 x 2m cables, Y-cable and 8m extension)

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis of the Raymarine RV-312 RealVision 3D through-hull transducer pack »

The Raymarine RV-312 RealVision 3D package is a relevant solution for boat owners with Axiom displays seeking advanced underwater imaging without an external sounder module. Its design with two through-hull transducers, one port and one starboard, ensures optimal coverage of the seabed and sides of the vessel, essential for precise 3D interpretation, particularly on planing hulls. The 12° tilt angle of the transducers is critical; it is essential to check the hull deadrise angle to ensure optimal performance, typically between 8 and 15 degrees, so that the active surface of the transducer is parallel to the seabed. Incorrect angle selection can significantly degrade image quality. The direct connection to an Axiom simplifies wiring and integration, reducing the number of components and potential failure points compared to a system with a remote sounder box. This type of transducer is ideal for sport fishing or locating submerged structures, offering a more intuitive view than traditional 2D sounders. However, through-hull installation requires drilling the hull, which must be done carefully by a professional to ensure watertightness and proper transducer positioning. For wooden or steel hulls, specific precautions must be taken to prevent electrolysis.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Bow and starboard through-hull plastic transducer pack 12° RV-312 RealVision 3D, direct connection to AXIOM (2 x 2m cables, Y-cable and 8m extension)

$2,090.92 USD

$2,090.92 USD ~~$2,275.40 USD~~

Frequently Asked Questions

Need help? Contact us

What is RealVision 3D technology and how does it work?

Raymarine's RealVision 3D technology, integrated into the RV-312 pack, combines DownVision, SideVision, and high-frequency CHIRP functions. It provides a detailed three-dimensional view of the underwater world. Unlike traditional sounders that offer a 2D view, RealVision 3D allows you to explore structures, fish schools, and seabed relief with unprecedented clarity and perspective, essential for fish detection and navigation.

Which Raymarine multifunction displays are compatible with this RV-312 sonar pack?

This RV-312 sonar pack is designed for direct integration with Raymarine Axiom multifunction displays. It is compatible with Axiom, Axiom+, and Axiom Pro models. The system is optimized for Raymarine LightHouse 4 software, ensuring seamless compatibility and integration with the latest features.

For which hull type is the RV-312 through-hull transducer pack suitable?

This system is specifically designed for hulls with a deadrise angle of 8 to 15 degrees. The supplied transducers are tilted at 12° to compensate for the hull angle and ensure optimal underwater imaging performance.

What exactly is included in the Raymarine RV-312 through-hull transducer pack?

The RV-312 pack includes:

Two 12° plastic through-hull transducers (port and starboard).Two 2 m transducer cables.A Y-cable for connecting both transducers.An 8 m extension cable.These components allow direct connection to Axiom displays.

Can the RV-312 probes be tested or operated out of the water?

No, it is imperative to test and operate the probes only when they are submerged in water. Operating them out of the water can cause overheating of the transducers and potentially damage them.

How do RV-312 transducers connect to an Axiom display?

The RV-312 transducers are designed for direct connection to Axiom multifunction displays. The kit includes two 2-meter cables, a Y-cable, and an 8-meter extension, allowing simplified wiring without requiring an external sounder module.

What are the detection ranges of the different sonar technologies in the RV-312?

The RV-312 pack, featuring RealVision 3D technology, offers the following detection ranges:

RealVision 3D: up to 91 meters (300 feet) depth and 91 meters (300 feet) to each side.

DownVision: up to 183 meters (600 feet) depth.

High-frequency CHIRP: up to 274 meters (900 feet) depth.

Is it necessary to calibrate the RV-312 transducers after installation?

Yes, an AHRS (Attitude and Heading Reference System) RealVision™ calibration is required after installing the transducers. This step is critical to ensure accurate 3D imaging and is performed via Raymarine's LightHouse 4 system.