Pack Raystar 150 10Hz GPS/Glonass antenna (STng) pour montage tubulaire

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 11%

Raymarine

T70327

Raystar 150 10Hz GPS/Glonass antenna (STng) pack for tubular mounting

Designed for precise navigation, the Raymarine Raystar 150 pack features a 10Hz GPS/Glonass antenna for fast-updating position and heading data. Natively integrating with SeaTalkng® networks, this external solution provides a reliable and high-performance GNSS source for Raymarine systems. The pack includes the RS150 antenna (ref. E70310), the tubular mounting adapter (ref. A80370), mounting screws, grub screws, and captive nuts.

Retail priceBenefit from the professional rate

$310.28 USD

$310.28 USD ~~$350.89 USD~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

IP rating	IPX6 / IPX7
Operating voltage	9-16 V
Product height	37 mm
Product width	95 mm
Wired network	SeaTalkng, NMEA 2000
Housing color	White
Max power consumption	2.5 W
Product depth	95 mm
Typical power consumption	0.36 W
NMEA 2000 Load Equivalency Number (LEN)	1 LEN
Mounting type	Tubular mounting
Operating temperature	-25°C to +55°C
Recommended fuse rating	5 A
Bus compatibility	SeaTalkng, NMEA 2000
Certifications	CE, IEC 60945, ETSI EN 303 413
Touchscreen	No
Wired input	SeaTalkng
Storage temperature	-30°C to +70°C
Relative humidity	93%
Package contents	Raystar 150 GPS/Glonass antenna, tubular mounting adapter, mounting plate, SeaTalkng cable (1m), hardware, documentation.
Race timer function	No

Detailed description

Designed for modern navigation systems, the Raymarine Raystar 150 antenna is an external GNSS (Global Navigation Satellite System) receiver that provides positioning and heading data with a 10 Hz update rate. This antenna is compatible with GPS and Glonass systems, offering a fast and accurate GNSS data source for chartplotters, autopilots, and other instruments connected via Raymarine’s SeaTalkng® network.

Integration and Performance of the Raystar 150

Integration with the SeaTalkng® network simplifies installation and communication with all compatible Raymarine equipment, such as the Axiom or Element series. Unlike GPS receivers integrated into multifunction displays or older 1 Hz antennas, the Raystar 150 ensures smoother chart movements and optimal responsiveness of autopilot systems thanks to its high refresh rate. The included pack features a specific adapter for tubular mounting, providing installation flexibility on masts, arches, or rails, where an unobstructed view of the sky is essential for stable and high-performance satellite reception.

Positioning and Compatibility

The Raystar 150 is positioned as a dedicated GNSS antenna, essential for installations requiring a reliable, high-frequency GPS source. It enhances Raymarine systems by providing high-quality raw data, which is particularly beneficial for high-speed navigation or applications where bottom-track position and speed accuracy are critical. This receiver maintains an up-to-date firmware version (v1.29 as of 08-2024), ensuring compatibility and performance within current Raymarine ecosystems. The included tubular mount enables a clean and optimized installation to maximize satellite reception.

Documentation

Type	Nom
	EN - Notice d'installation - Pack Raystar 150 10Hz GPS/Glonass antenna (STng) pour montage tubulaire
	EN - Installation manual - Raystar 150 10Hz GPS/Glonass antenna (STng) for tubular mounting
	FR - Notice d'installation - Pack Raystar 150 10Hz GPS/Glonass antenna (STng) pour montage tubulaire
	EN - Declaration of Conformity - Pack Raystar 150 10Hz GPS/Glonass antenna (STng) for tubular mounting
	EN - Mounting template - Pack Raystar 150 10Hz GPS/Glonass antenna (STng) for tubular mounting
	EN - Mounting Template - Raystar 150 10Hz GPS/Glonass Antenna (STng) for Tubular Mounting
	EN - Technical Drawing - Raystar 150 10Hz GPS/Glonass antenna (STng) for tubular mounting

Expert opinion

Pol CONIN

Digital Manager

« Raymarine Raystar 150 GPS/Glonass antenna: 10Hz precision and SeaTalkng integration »

The Raymarine Raystar 150 antenna is a technically sound solution for any SeaTalkng® navigation system requiring a dedicated and high-performance GNSS source. Its 10 Hz refresh rate is a major asset, providing position and heading data updates ten times per second. This feature is critical for high-speed vessels or autopilot systems demanding superior responsiveness and accuracy, preventing lag or jerky movements often seen with low-frequency receivers.

The kit includes a tubular mounting adapter (A80370), significantly simplifying integration. This mount allows positioning the antenna in the most unobstructed location on the boat (mast, arch, or stern rail), optimizing GPS and Glonass signal reception and minimizing interference or structural obstructions. Installation is eased by SeaTalkng® connectivity, which is a plug-and-play network. However, careful attention must be paid to cable routing to avoid RF interference, especially near radars or VHF antennas, even though the product is designed for marine robustness.

This model is particularly suitable for new installations or upgrades of existing Raymarine systems where the internal GPS source of an MFD is insufficient or poorly positioned. It provides a reliable alternative to chartplotter-integrated GPS antennas, which may be limited by screen location. It is not suitable for direct NMEA 0183 networks without a gateway, nor for applications not requiring a high refresh rate, where a 1Hz receiver might suffice but at the cost of dynamic smoothness and precision.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Raystar 150 10Hz GPS/Glonass antenna (STng) pack for tubular mounting

$310.28 USD

$310.28 USD ~~$350.89 USD~~

Frequently Asked Questions

Need help? Contact us

What type of positioning system does the Raystar 150 antenna use?

The Raymarine Raystar 150 antenna is an external GNSS (Global Navigation Satellite System) receiver. It is compatible with GPS and Glonass systems, providing accurate positioning and heading data.

It offers a fast 10 Hz update rate, ensuring smoother movement on charts and optimal responsiveness for autopilot systems.

With which Raymarine systems is the Raystar 150 antenna compatible?

The Raystar 150 antenna is designed to integrate with Raymarine navigation systems via the SeaTalkng® network.

It is compatible with a wide range of Raymarine equipment, including the Axiom and Element series, for which it provides high-quality GNSS (GPS/Glonass) data.

How does the Raystar 150 antenna connect to my boat's network?

The Raystar 150 antenna connects to your boat's network via Raymarine's SeaTalkng® system. This connection enables integration and communication with other Raymarine-compatible equipment.

Additionally, the antenna can be connected to an NMEA 2000 network via the SeaTalkng® network.

What are the mounting options for the Raystar 150 antenna?

The Raystar 150 package includes a specific adapter for tubular mounting, allowing flexible installation on a mast, arch, or rail. For tubular mounting, a mast with a 1-inch 14 TPI thread is required.

In addition to tubular mounting, the antenna can also be installed in various ways, including surface mounting (with studs and wing nuts or with the mounting plate), on a bulkhead, or using a riser.

What is the data refresh rate for positioning provided by the Raystar 150?

The Raystar 150 antenna provides positioning and heading data with a high refresh rate of 10 Hz.

This fast refresh rate ensures smooth representation of movements on marine charts and contributes to optimal responsiveness of autopilot systems.

How is the Raystar 150 antenna electrically powered?

The Raystar 150 antenna is powered via Raymarine's SeaTalkng® network. It does not require a separate power supply.

Power can be supplied directly by the SeaTalkng® network or, in some cases, via an autopilot control unit (ACU-Series) connected to the same network.

What are the recommendations for the placement of the Raystar 150 antenna to optimize reception?

To ensure stable and high-performance satellite reception, it is essential to install the Raystar 150 antenna in a location with an unobstructed view of the sky.

Additionally, it is important to follow the installation guidelines to minimize RF (radio frequency) interference and maintain the safety distance from the vessel's magnetic compasses, as specified in the installation manual.

How can I diagnose an issue with the Raystar 150 antenna?

If you encounter an issue with the Raystar 150 antenna, you can perform an initial test and refer to the troubleshooting section of the installation manual.

The antenna features LED diagnostics that can help you identify the nature of the problem. Specific sections are also dedicated to troubleshooting GNSS (GPS) related issues.