Module sondeur RVM1600 RealVision avec sondeur 1kW, DownVision, SideVision et RealVision 3D

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 9%

Raymarine

E70665

RVM1600 RealVision fishfinder module with 1kW sounder, DownVision, SideVision and RealVision 3D

The Raymarine RVM1600 RealVision sounder module is an expansion solution for compatible multifunction displays, offering a 1 kW CHIRP sounder, DownVision, SideVision, and RealVision 3D. Designed for advanced underwater detection, it requires a dedicated RealVision 3D transducer (RVM-100 or RVM-400 series) and installation respecting a maximum cable length of 18 meters. This product is the module only, without a transducer or additional accessories.

Retail priceBenefit from the professional rate

$1,504.41 USD

$1,504.41 USD ~~$1,659.27 USD~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	RealVision MAX, DownVision, SideVision, RealVision 3D, traditional CHIRP
Operating voltage	12V DC
Fishfinder frequencies	Traditional CHIRP (40-230 kHz), RealVision (350-420 kHz)
Operating temperature	-10°C to +55°C
Peak power	8000.0
Max depth reading	900.0
Transducer material	Depends on the transducer (plastic, bronze, stainless steel)
Sonar connector type	Raymarine RealVision (proprietary)
Integrated temperature sensor	No (depends on the depth sounder)
Compatible displays	Raymarine Axiom, Axiom+, Axiom Pro, Axiom XL
Bus compatibility	RayNet
Wired network	RayNet
Certifications	CE
Beam coverage angle	Depends on the depth sounder
Fishing type	sea, lake, river, trolling, vertical
Integrated speed sensor	No

Detailed description

The Raymarine RVM1600 RealVision fishfinder module is designed to extend the underwater detection capabilities of compatible navigation systems. It integrates a 1 kW CHIRP sounder along with DownVision, SideVision, and RealVision 3D imaging technologies. These features enable detailed and three-dimensional visualization of the seabed, structures, and underwater targets.

RealVision system integration and performance

The RVM1600 is a key component for recreational boaters and anglers seeking a complete view of their underwater environment. It operates in conjunction with multifunction displays (MFD) and RealVision 3D or RealVision Max 3D transducers, such as the RVM-100 (transom-mount) and RVM-400 (in-hull) series. The maximum cable length between the transducer and the fishfinder module or multifunction display must not exceed 18 meters (59 feet) to ensure optimal performance and prevent system damage.

Advanced fishfinder technologies: RealVision 3D, DownVision, SideVision

With the RVM1600, users benefit from the combined advantages of multiple fishfinder technologies. DownVision provides a photographic view of structures and fish directly beneath the boat, while SideVision extends this detection to the sides to scan large areas. RealVision 3D merges this data to create a three-dimensional representation of the underwater terrain, facilitating the identification of depth changes and fish habitats. The 1 kW CHIRP sounder ensures target detection at significant depths, outperforming lower-power sounders.

Documentation

Type	Nom
	EN - Plan technique - Module sondeur RVM1600 RealVision avec sondeur 1kW, DownVision, SideVision et RealVision 3D
	EN - Technical Sheet - RVM1600 RealVision Sounder Module with 1kW Fishfinder, DownVision, SideVision and RealVision 3D
	EN - Technical datasheet - RVM1600 RealVision module with 1kW fishfinder, DownVision, SideVision and RealVision 3D
	EN - Plan technique - Module sondeur RVM1600 RealVision avec sondeur 1kW, DownVision, SideVision et RealVision 3D
	EN - Technical drawing - RVM1600 RealVision module with 1kW fishfinder, DownVision, SideVision and RealVision 3D
	FR - Notice d'installation - Module sondeur RVM1600 RealVision avec sondeur 1kW, DownVision, SideVision et RealVision 3D
	EN - Notice d'installation - Module sondeur RVM1600 RealVision avec sondeur 1kW, DownVision, SideVision et RealVision 3D
	EN - Mounting template - RVM1600 RealVision module with 1kW fishfinder, DownVision, SideVision and RealVision 3D

Expert opinion

Pol CONIN

Digital Manager

« Raymarine RVM1600 fishfinder module: RealVision 3D 1kW extension for MFD »

The Raymarine RVM1600 RealVision sounder module is designed for demanding recreational boaters and anglers who already own a compatible Raymarine multifunction display and want to add a high-performance sounder system. Unlike MFDs with built-in sounders, this external module offers the flexibility of 1 kW CHIRP power, a key advantage for detecting fish in deeper waters or challenging conditions. It is engineered to work with dedicated RealVision 3D transducers, such as the RVM-100 transom-mount or the RVM-400 through-hull models, providing a complete solution for DownVision, SideVision, and RealVision 3D imaging.

Installing the RVM1600 is straightforward for the module itself, requiring a connection to the vessel’s power supply and the Raymarine network (often Ethernet for sounder data) as well as the RealVision transducer. The main challenge lies in selecting and mounting the appropriate transducer for the hull and type of navigation. It is critical to respect the 18-meter maximum cable length between the transducer and the module to maintain signal integrity and system performance. This module is ideal for those looking to significantly enhance their detection capabilities without replacing their entire MFD, adding sounder power and 3D views that may not be available on entry-level models or older display generations.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

RVM1600 RealVision fishfinder module with 1kW sounder, DownVision, SideVision and RealVision 3D

$1,504.41 USD

$1,504.41 USD ~~$1,659.27 USD~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine RVM1600 fishfinder module and what are its main features?

The Raymarine RVM1600 RealVision sounder module is a device designed to extend the underwater detection capabilities of your navigation system. It integrates a 1 kW CHIRP sounder along with advanced DownVision, SideVision, and RealVision 3D imaging technologies. These features enable highly detailed and three-dimensional visualization of the seabed, submerged structures, and underwater targets.

With which Raymarine multifunction displays is the RVM1600 sounder module compatible?

The RVM1600 sounder module is compatible with Raymarine multifunction displays (MFD) from the Axiom, Axiom+, Axiom Pro, and Axiom XL series. It functions as an external component that connects to these displays to extend their sounder capabilities.

Which type of transducer is required to use the RVM1600 module and its advanced functions?

To fully utilize the RVM1600 module's features, you must use a RealVision 3D or RealVision Max 3D compatible transducer. These transducers are available in various configurations, such as the RVM-100 series for transom mount or the RVM-400 series for through-hull installation.

What is the maximum cable length I can use with the RVM1600 sounder module?

The maximum cable length between the RealVision 3D or RealVision Max 3D transducer and the RVM1600 sounder module or multifunction display must not exceed 18 meters (59 feet). This limit includes the transducer’s captive cable. Exceeding this maximum length may degrade sounder performance and potentially damage the transducer or module.

Can I test the connected transducer with the RVM1600 module out of the water?

No, it is mandatory to test and use the transducer only when it is submerged in water. Operating the transducer out of the water may cause overheating and damage the device.

Is it possible to shorten or lengthen the depth sounder cable to make installation easier?

It is strongly discouraged to cut the depth sounder cable. Cutting the cable significantly reduces the fishfinder's performance, and if the cable is cut, it must be replaced as it cannot be repaired. Additionally, cutting the depth sounder cable voids the product warranty and invalidates the CE European certification.

How do RealVision 3D, DownVision, and SideVision technologies work together?

These technologies work together to provide a complete underwater view:

DownVision: Provides a clear photographic view of structures and fish directly beneath your boat.SideVision: Extends detection to the sides of your boat, allowing you to scan wide areas and spot distant targets.RealVision 3D: Merges DownVision and SideVision data to create a three-dimensional representation of the underwater terrain. This makes it easier to identify depth changes, bottom contours, and potential fish habitats.

What is the power rating of the traditional depth sounder integrated into the RVM1600 module?

The RVM1600 module integrates a CHIRP depth sounder with a power rating of 1 kW. This high power enables reliable target detection at significant depths, delivering superior performance compared to lower-power sounders.