Câble d’adaptation SeaTalk NG vers SeaTalk1

SeaTalk 1 to SeaTalkNG Spur Female Adaptor Cable (400mm)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

A06047

SeaTalk NG to SeaTalk1 adapter cable

The Raymarine A06047 adapter cable is designed to connect an existing SeaTalk(1) device to a modern SeaTalkng network. It allows integration of older instruments, extending their lifespan and optimizing your installation without a full replacement. The cable is supplied alone.

Retail priceBenefit from the professional rate

$21.23 USD

$21.23 USD ~~$23.79 USD~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	SeaTalk NG (male) to SeaTalk1 (female)
Cable type	Adapter cable
Cable length	0.4
Compatible network	SeaTalk NG, SeaTalk1
Wired network	SeaTalk NG,SeaTalk1
Operating voltage	12 V DC
Certifications	CE,EMC
Product type	Wiring accessory
Compatible models	All Raymarine devices equipped with SeaTalk1 interface

Detailed description

Designed for flexibility in marine networks, the Raymarine SeaTalk NG to SeaTalk1 adapter cable A06047 enables the integration of instruments and sensors equipped with the older proprietary SeaTalk(1) interface into a modern SeaTalkng network. This solution is essential for vessel owners looking to modernize their navigation system without replacing all existing equipment.

Raymarine System Integration and Compatibility

Raymarine’s SeaTalkng system is an interconnection bus that uses a backbone and spur cables to connect products. The A06047 cable acts as a critical bridge, allowing SeaTalk(1) devices to communicate within this newer architecture. While products like ST70 instruments may offer more complex bridging functions, this adapter cable focuses on direct physical connectivity, simplifying integration for specific installations where the SeaTalk(1) device is close to the SeaTalkng network. It differs from NMEA 2000 adapter cables, which target interoperability with non-Raymarine equipment.

Simplified Design and Installation

The A06047 adapter cable leverages the SeaTalkng design, which prioritizes ease of installation. Small-diameter connectors and color-coded cables (blue for backbone, white for spurs, red stripe for power) minimize connection errors. This approach eliminates the need to cut or splice cables, providing a plug-and-play solution. Integrating SeaTalk(1) products via this cable allows users to benefit from SeaTalkng advantages, such as a distributed architecture for power and data transmission, while optimizing investment in existing equipment.

Documentation

Type	Nom
	EN - Manuel d'utilisation - Câble d’adaptation SeaTalk NG vers SeaTalk1

Expert opinion

Pol CONIN

Digital Manager

« Essential bridge for integrating SeaTalk(1) and SeaTalkng systems »

This Raymarine A06047 adapter cable is a fundamental component for managing hybrid systems on board. It addresses a common need: integrating an existing SeaTalk(1) instrument, such as a wind sensor or a depth sounder, into a modern SeaTalkng network architecture. Rather than considering the costly replacement of a fully functional SeaTalk(1) device, this cable allows direct connection to the SeaTalkng backbone via a spur.

The 400mm length of this cable is a key factor. It is designed for close-range connections, where the SeaTalk(1) device can be installed just a few centimeters from a SeaTalkng connection point, typically a T-connector or a junction box. This simplifies wiring and reduces clutter. It is imperative to ensure that the SeaTalk(1) device is compatible with data integration on the SeaTalkng network. This cable provides physical connectivity, but data translation will depend on the SeaTalk(1) device itself or a SeaTalkng instrument acting as a data bridge, such as older ST70 displays that included this function.

Its use is particularly relevant for sailboats or recreational craft that are gradually upgrading their electronics. It is not a complex protocol converter, but a wiring adapter that relies on Raymarine systems' ability to coexist. It is a simple and direct solution for maintaining the functionality of reliable equipment while benefiting from SeaTalkng's modularity.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

SeaTalk NG to SeaTalk1 adapter cable

$21.23 USD

$21.23 USD ~~$23.79 USD~~

Frequently Asked Questions

Need help? Contact us

What is the SeaTalk NG to SeaTalk1 Raymarine A06047 adapter cable used for?

This adapter cable is designed to integrate instruments and sensors equipped with the older proprietary SeaTalk(1) interface into a modern Raymarine SeaTalkng network. It acts as a critical bridge for communication between these two network architectures.

Which SeaTalk(1) devices can be connected with this cable?

The A06047 cable allows you to connect existing instruments and sensors equipped with the SeaTalk(1) interface to a SeaTalkng network. This is useful for boat owners who want to modernize their navigation system without having to replace all their functional SeaTalk(1) equipment.

Is the A06047 adapter cable compatible with NMEA2000 networks?

No, this adapter cable is specifically designed for interconnecting Raymarine’s proprietary SeaTalk(1) and SeaTalkng systems. It differs from NMEA2000 adapter cables, which are intended for interoperability with non-Raymarine equipment using the NMEA2000 standard.

How does cable A06047 facilitate installation in a SeaTalkng network?

Cable A06047 leverages the SeaTalkng design, which prioritizes ease of installation. It uses small-diameter connectors and is designed as a plug-and-play solution, eliminating the need to cut or splice cables. The color coding of the cables (blue for the backbone, white for spurs) also minimizes the risk of connection errors.

Is it necessary to cut or splice cables when using the A06047 adapter?

No, the A06047 adapter cable and the SeaTalkng system are designed to provide a plug-and-play solution. Therefore, it is not necessary to cut or splice cables for installation, which greatly simplifies the process.

Where should this cable be connected in a SeaTalkng network?

The A06047 adapter cable is designed to connect a SeaTalk(1) device directly to a SeaTalkng network. It is typically used when the SeaTalk(1) device is near the SeaTalkng network, acting as a 'spur' (branch cable) to integrate legacy equipment into the new backbone.

What is the difference between this cable and an ST70 instrument for SeaTalk(1) bridging?

While products like Raymarine's ST70 instruments can offer more complex bridging between SeaTalk(1) and SeaTalkng, the A06047 adapter cable focuses on direct physical connectivity. It provides a simple and direct solution for integrating a specific SeaTalk(1) device into a SeaTalkng network.

Does the A06047 adapter cable require a separate power supply?

The A06047 cable itself is a passive adapter. Integrating SeaTalk(1) products via this cable leverages the benefits of the SeaTalkng network, which includes a distributed architecture for power and data transmission. Devices connected via the SeaTalkng network are powered by it.