Sonde Tableau RV-100 RealVision 3D , branchement direct AXIOM (Câble 8m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 11%

Raymarine

A80464

RV-100 RealVision 3D Transducer Panel Mount, direct connection to AXIOM (8m cable)

Designed for Raymarine Axiom multifunction displays, the RV-100 RealVision 3D transom-mount sonar from Raymarine delivers detailed DownVision, SideVision, and 3D imaging. It connects directly to your Axiom via its 8 m cable, simplifying installation. The transducer comes with an 8 m cable for direct connection to Axiom and transom-mounting hardware.

Retail priceBenefit from the professional rate

$521.32 USD

$521.32 USD ~~$588.77 USD~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	CHIRP, DownVision, SideVision, RealVision 3D
Operating voltage	12 V
Fishfinder frequencies	170-230, 200, 350
Operating temperature	-25 to +55
Peak power	4800.0
Max depth reading	274.0
Transducer material	Plastic
Sonar connector type	Raymarine RealVision (25-pin)
Cable length	8.0
Product width	100
Integrated temperature sensor	Yes
Product height	60
Compatible displays	Raymarine Axiom
Product depth	40
IP rating	IPX6/IPX7
Wired network	Owner
Compass safe distance	50
Mounting type	Stern display
Certifications	CE, FCC, RCM, IC, RoHS
Temperature measurement range	-10 to +40
Beam coverage angle	180
CHIRP high frequency	170-230
Fishing type	Sea, Lake
Integrated speed sensor	No
Release year	2017.0
Warranty	2.0

Detailed description

Designed for Raymarine Axiom multifunction displays, the RV-100 RealVision 3D transom-mounted transducer (SKU: A80464) is an all-in-one transducer integrating DownVision, SideVision, and RealVision 3D technologies. It connects directly to Axiom displays via its integrated 8-meter cable, simplifying sonar system architecture without requiring an external module. This transducer provides users with detailed views of underwater structures and fish schools.

Integration and Performance

The RV-100 serves as a versatile solution within the Raymarine lineup. Unlike traditional 2D transducers or dedicated CHIRP sounder modules such as the CP470 or CP570, the RV-100 combines advanced imaging technologies in a single housing. It is specifically optimized for Axiom displays, ensuring compatibility and optimal performance for 3D image display. Its 8-meter cable suits most recreational boat installations, offering flexibility for transom mounting.

Advanced Sonar Technologies

Raymarine’s RealVision 3D technology delivers a three-dimensional representation of the seafloor, aiding in identifying depth changes, wrecks, or rocks. DownVision and SideVision functions complement this offering by providing clear photographic views of what lies directly beneath the boat and to the sides, respectively. These combined capabilities make the RV-100 transducer a tool suited for sport fishing and recreational sailing requiring a deep understanding of the immediate underwater environment.

Documentation

Type	Nom
	EN - Technical Drawing - RV-100 RealVision 3D Display, Direct Axiom Connection (8m Cable)
	FR - Manuel d'utilisation - Sonde Tableau RV-100 RealVision 3D , branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde Tableau RV-100 RealVision 3D , branchement direct AXIOM (Câble 8m)
	EN - Technical Drawing - RV-100 RealVision 3D Sonar Tablet, Direct AXIOM Connection (8m Cable)
	EN - Technical Drawing - RV-100 RealVision 3D Tabletop Sonar, Direct AXIOM Connection (8m Cable)
	EN - Technical Diagram - RV-100 RealVision 3D Sonar, Direct Connection to AXIOM (8m Cable)
	FR - Plan technique - Sonde Tableau RV-100 RealVision 3D , branchement direct AXIOM (Câble 8m)
	EN - Technical drawing - RV-100 RealVision 3D Transom Mounting Template, direct connection to AXIOM (8m cable)

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis: Raymarine RV-100 RealVision 3D sonar transducer for Axiom »

The Raymarine RV-100 RealVision 3D stern-mount transducer is a strategic component for Axiom system owners seeking an advanced and simplified sonar imaging solution. Its main advantage lies in integrating multiple technologies (DownVision, SideVision, RealVision 3D) into a single transducer, eliminating the need for an external sounder module and reducing installation complexity.

For installation, stern-mount positioning requires careful attention to placement to avoid turbulence, particularly on planing hulls. Incorrect positioning can significantly degrade image quality at high speeds. The supplied 8 m cable is usually sufficient for mid-sized boats, but an extension may be required on larger units or with complex cable runs. Direct connection to the Axiom is a major benefit, reducing potential failure points and simplifying overall system wiring.

Compared to single-frequency transducers or systems requiring dedicated black boxes, the RV-100 delivers excellent usability for structure and fish detection, particularly in coastal fishing or freshwater. It is not intended to replace high-performance through-hull transducers or high-power CHIRP modules, which offer superior deep-water penetration and detection capabilities for specific applications. Its ideal use case is for recreational boaters and anglers who prioritize clear, detailed views of the immediate underwater environment on their Axiom display without compromising integration.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

RV-100 RealVision 3D Transducer Panel Mount, direct connection to AXIOM (8m cable)

$521.32 USD

$521.32 USD ~~$588.77 USD~~

Frequently Asked Questions

Need help? Contact us

Which sonar technologies are integrated in the Raymarine RV-100 RealVision 3D?

The RV-100 RealVision 3D stern-mount transducer is an all-in-one transducer that integrates several advanced Raymarine sonar technologies:

DownVision™: Provides clear photographic views of what lies directly beneath the boat.SideVision™: Offers detailed views of what lies on the sides of the boat.RealVision™ 3D: Enables a three-dimensional representation of the seabed and underwater structures.

Which multifunction displays is the RV-100 compatible with?

The RV-100 RealVision 3D sounder is specifically designed for Raymarine Axiom multifunction displays. It connects directly to these displays, ensuring optimal compatibility and performance for 3D sonar imaging.

What is the length of the RV-100 transducer cable, and can it be extended?

The RV-100 transducer is supplied with an integrated 8-metre cable. This length suits most recreational boat installations. If additional length is required, extension cables specifically designed for RealVision™ 3D transducers are available.

What is the mounting type for the Raymarine RV-100 transducer?

The Raymarine RV-100 RealVision 3D transducer is designed for transom mounting on the stern (transom mount) of your boat. This mounting type allows for relatively simple installation and is common for recreational boats.

Does the RV-100 transducer require an external sonar module to work with an Axiom display?

No, the RV-100 transducer is an all-in-one transducer that connects directly to Raymarine Axiom multifunction displays. It does not require a dedicated external sonar module, which simplifies system architecture and installation.

How does RealVision 3D technology improve underwater visualization?

Raymarine's RealVision 3D technology provides a highly detailed three-dimensional representation of the seabed. This helps users to more easily identify:

Depth changes.Underwater structures (wrecks, rocks, etc.).Fish schools.This comprehensive and intuitive view improves navigation and sport fishing by providing a better understanding of the immediate underwater environment.

What are the key steps for installing the RV-100 depth sounder on the transom?

The installation process for the RV-100 depth sounder on the transom typically includes the following key steps:

Performing a pre-test of the transducer. Mounting the transom bracket. Installing the transducer on the bracket. Securing the connector locking collar. Making electrical and data connections. Installing the escutcheon plate. Testing and adjusting the transducer for optimal performance. Finalizing the transducer installation.

What is the purpose of AHRS (Attitude and Heading Reference System) calibration for the RealVision 3D fishfinder?

AHRS (Attitude and Heading Reference System) calibration is an essential function for RealVision 3D technology. It compensates for boat movements such as pitch and roll to stabilize the 3D sonar image. This calibration ensures accurate and consistent representation of the seabed, even when the boat is moving or in rough sea conditions, providing a reliable and easy-to-interpret underwater view.