Remote power switch INSIGHT GC2 M8 with 3 m cable

This is an accessory designed for RELiON InSight lithium battery systems. It provides practical and secure control to turn the InSight batteries on and off without requiring direct access to the battery compartment.

Its primary function is to provide a simple and secure way to remotely turn RELiON InSight batteries on and off, optimizing your system management and enhancing safety by isolating circuits.

The RS-GC2-03 switch is supplied with a 3-metre cable.

This device enhances system safety by providing remote circuit isolation. This feature is particularly useful in emergencies or for maintenance, allowing power to be cut without direct contact with the batteries.

This remote power switch is from the RELiON brand.

The model number or SKU of this switch is RS-GC2-03.

The switch weighs 0.1 kg.

The switch connects to the system via an M8 connector.

To power on the battery, press and hold the switch button for 5 seconds until LED1 flashes green, then release the button. The battery will power on.

To turn off the battery, press the button briefly, release, then press and hold the button for 6 seconds until LED1 is solid red and LED2 is solid red. Release the button. The battery will power off.

This switch is specifically designed for use with RELiON InSight lithium battery systems.

Yes, this switch can simultaneously control up to 10 InSight batteries connected in parallel.

No, InSight batteries can only be used in parallel, not in series. The switch is designed to operate in this configuration only.

Yes, the switch is compatible with InSight battery models such as 12V120-1-GC2, 24V060-GC2 and 48V030-GC2, as well as their LT variants.

Yes, it is recommended to use appropriately sized connection cables and protection devices to ensure proper operation and system safety.

The switch connects via an M8 connector. Its 3-meter cable is fitted with eye terminals for connection to the battery’s positive and negative terminals, as well as a CANbus plug.

The CANbus connector must be inserted into the CANbus IN port of the first InSight battery in a bank of batteries connected in parallel.

Eye terminals are designed to be connected to the positive and negative terminals of the battery, thereby ensuring the power supply to the switch and its integration into the system.

Installing the RELiON remote switch is described as simple and quick, thanks to its design for easy integration with InSight battery systems.

The recommended torque for InSight battery M8 terminals is 9-10 Nm (79.7-88.5 in-lbs).