Simrad GO9 XSE with Active Imaging 3-in-1 transducer and HALO20+ radar

This complete pack includes the Simrad GO9 XSE multifunction display, an Active Imaging 3-in-1 transducer for advanced sonar capabilities, and the Halo20+ radar dome for high-performance radar detection.

The Simrad GO9 XSE screen is a 9-inch multi-touch display. It offers a resolution of 800 x 480 pixels and a 1200-nit LED backlight, ensuring excellent visibility even in full sunlight.

Yes, the Simrad GO9 XSE is equipped with an integrated 10Hz, 32-channel GPS receiver. It is compatible with WAAS, MSAS, EGNOS, and GLONASS systems, enabling it to provide position updates ten times per second.

The Simrad GO9 XSE has built-in Wi-Fi and Bluetooth. These features allow screen mirroring to mobile devices and simplify software updates.

The Active Imaging 3-in-1 transducer supports multiple advanced sonar technologies: CHIRP for improved fish detection, DownScan Imaging for detailed images of the seabed directly beneath the boat, and SideScan Imaging for a panoramic view of structures and fish to the sides of the boat.

The Halo20+ radar is a pulse-compression dome radar operating on the X-band (9.4 to 9.5 GHz). It delivers a peak output power of 25 W, instant-on capability (Instant On™) without a magnetron, and detection ranges from 100 meters to 89 kilometers (48 nm).

The Halo20+ radar offers a minimum range of 6 meters (19.7 ft) and a maximum range of 89 kilometers (48 nm). It features 18 different range settings to adapt to various sailing situations.

In operating mode, the Halo20+ radar's power consumption ranges from 17 to 29 W, depending on the range and mode used. In standby mode, its consumption is typically 3.9 W at 13.8 V DC.

Yes, the Simrad GO9 XSE is equipped with an NMEA 2000 Micro-C port. This connectivity allows it to be connected to other NMEA 2000 devices for engine monitoring, autopilot control, and data exchange with other navigation equipment.

Yes, the Halo20+ radar can potentially interfere with the vessel’s compass if installed too close. It is recommended to maintain a minimum distance of 0.7 meters (2.3 ft) between the radar and the compass to avoid any disruption.

For optimal performance and to avoid interference or blind spots, ensure at least 255 mm (10.0") of clearance in all directions from the center of the Halo20+ radar relative to other objects or structures.

The mounting surface thickness for the Halo20+ radar must be at least 3 mm (0.11") and no more than 18 mm (0.7"). If the surface is thicker, longer bolts than those supplied will be required.

The maximum recommended length for the Halo20+ radar interconnect cable is 30 meters (98.5 ft). Cables of this length are available, and it is important not to exceed this limit to ensure reliable data transmission.

The Halo20+ radar requires a DC power supply between 10.5 and 31.2 V. It also features reverse polarity protection. A 5 A fuse is recommended for the power line.

Yes, the Simrad GO9 XSE has a 5-pin Ethernet port that allows connection to a SiriusXM module (for North America) in addition to radar connection.

The Simrad GO9 XSE supports a wide range of marine charts for navigation. It is compatible with C-MAP® DISCOVER™, C-MAP REVEAL™, Navionics®, Florida Marine Tracks™, and NV Digital™ Charts.

Yes, the Halo20+ radar is designed for marine use. It is IPX6 rated for water resistance and can operate within an extended temperature range of -25°C to +55°C (-13°F to +130°F).

This pack is covered by Simrad Yachting's standard manufacturer warranty. For specific details regarding the warranty terms and conditions, please refer to the official documentation provided by the manufacturer.

For correct installation, use the provided mounting template and secure it firmly in the chosen location. Before drilling, carefully check that the template is oriented so that the front of the radar scanner unit faces forward on the vessel.

Yes, the Simrad GO9 XSE software can be updated. Updates can typically be performed via the device's built-in Wi-Fi connection or by using a USB drive, allowing access to the latest features and improvements.